RoadVitals

1996 Altec Am Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Nov 21, 2024
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

24V881000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:HOSES/CABLES/RODS/GEARS/STRUT/CYLINDER

Nov 21, 2024
158 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 1995-1996 AM and AN aerial devices. Please see the recall report for a complete list of models. The hydraulic cylinder head gland may have been improperly manufactured, which can result in it detaching from the barrel of the cylinder while under load, leaving the lower boom unsupported.
The risk: A loss of lower boom support during operation could cause the lower boom to fall, increasing the risk of injury.
The remedy: Owners should inspect the cylinder and confirm that the cylinder matches the part number and serial number list. If the unit has an affected cylinder, the owner should remove the unit from service or replace the cylinder. If an owner chooses to keep a recalled unit in service, Altec will offer a kit the owner can purchase, and install at their own expense. Owner notification letters were mailed May 6, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3199.
Altec Industries, Inc.Manufacturer number CSN-3199View on NHTSA.gov
10V610000

EQUIPMENT

Dec 6, 2010
161 units potentially affected
The defect: ALTEC IS RECALLING CERTAIN MODEL YEAR 1994-1997 SERVICE VEHICLES BUILT FROM SEPTEMBER 1994 THROUGH MARCH 1997, AND EQUIPPED WITH AERIAL DEVICES WITH BOOM LIFT CYLINDER PART NUMBER 350-40094. THE HYDRAULIC CYLINDER AS MANUFACTURED COULD FAIL WHEN SUBJECT TO FREQUENT TENSILE LOADING.
The risk: FAILURE OF THE LOWER BOOM LIFT CYLINDER CAN CAUSE DEATH OR SERIOUS INJURY.
The remedy: ALTEC WILL REPLACE THE HYDRAULIC CYLINDERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 15, 2010. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.
ALTEC INDUSTRIES INC.Manufacturer number MAB 540View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources