RoadVitals

2022 Altec At Series Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Jun 12, 2026
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

26V386000

POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH

Jun 12, 2026
4,923 units potentially affected
The defect: Altec industries, Inc. is recalling certain 2014-2026 AT Series Aerial Device vehicles. The transmission park interlock may be missing, allowing the aerial device to operate while the chassis is not in park.
The risk: An aerial device that operates while the vehicle is in gear or neutral can cause unexpected vehicle movement and increase the risk of injury.
The remedy: Altec will update the electrical harness and control modules, free of charge. Owner notification letters were mailed August 7, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3331.
Altec Industries, Inc.Manufacturer number CSN-3331View on NHTSA.gov
26V310000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:CONTROLS/CONTROL WIRING

May 15, 2026
213 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2022-2025 AT Series, 2021-2025 AN Series Aerial Device, 2020-2026 TA Series Aerial Device, 2021 L Series Aerial Device, 2021 LR Series Aerial Device, 2023-2025 AM Series Aerial Device, and 2024-2025 AA Series Aerial Device vehicles. The ground level emergency stop (E-stop) may not stop hydraulic functions of the machine when the machine is in ePTO mode.
The risk: Hydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.
The remedy: Altec will inspect the units and test to verify the E-stop function. If the wiring is found to be incorrect, it will be updated, free of charge. Letters informing owners of the safety risk were mailed on July 8, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3322.
Altec Industries, Inc.Manufacturer number CSN-3322View on NHTSA.gov
25V810000

ELECTRICAL SYSTEM:WIRING

Nov 21, 2025
37 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2019-2024 AT Series vehicles. The lower emergency stop may not function when the upper control is selected.
The risk: An emergency stop that does not shut off the unit during an emergency increases the risk of death or serious injury.
The remedy: Altec will correct the wiring between the power distribution module and the machine harness, free of charge. Owner notification letters are expected to be mailed January 16, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3265.
Altec Industries, Inc.Manufacturer number CSN-3265View on NHTSA.gov
25V400000

ELECTRICAL SYSTEM:WIRING:POWER DISTRIBUTION MODULE/IPDM

Jun 13, 2025
965 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2020 TA Series, 2019 L Series Aerial Device, 2018-2025 Service Body, LS Series, and AT Series trucks. The Power Distribution Module (PDM 10) circuit may experience a voltage spike, which can damage the Transfer Case Control Module (TCCM) and disrupt chassis functions, including the PTO switch, rearview mirror, or rearview camera.
The risk: A damaged TCCM and disrupted chassis functions can result in a loss of handling and control or brake performance, increasing the risk of a crash.
The remedy: Altec will install a diode to the ignition hot circuit, free of charge. Owner notification letters were mailed August 8, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3229.
Altec Industries, Inc.Manufacturer number CSN-3229View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources