RoadVitals

2013 Altec AT237

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Jun 19, 2014
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2013 Altec AT237. 2 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov

SUSPENSION:FRONT:SPRINGS:TORSION BAR

Jun 19, 2014
258 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain model year 2013 AT237, and 2013-2014 AT3X-G, AT40-G, and AT248F aerial trucks manufactured August 2013 through April 2014, built on Ford F-450 and F-550 chassis, and equipped with front "Stable Ride" torsion bars. These torsion bars have welds that could fail.
The risk: If the torsion bar welds fail, the vehicle may become unstable, increasing the risk of injury to the operator using the aerial device.
The remedy: Altec will notify owners, and dealers will inspect the front torsion bars and replace any that have deficient welds, free of charge. The recall began in August 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 599.
Altec Industries Inc.Manufacturer number CSN 599View on NHTSA.gov

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; EQUIPMENT

Sep 26, 2013
1,145 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AT200A, AT235, AT235P, AT30-G, AT35-G, AT37-G, AT40-G and AT237 Aerial Devices mounted on Ford Super Duty Chassis' equipped with 6.8L gas engines and Muncie FR67 power take offs (PTO). In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
The risk: Oil leaking onto the thermal blanket combined with heat from exhaust may result in an increased risk of fire.
The remedy: Altec will notify owners, and dealers will replace the affected pressure switch and thermal blanket with the kit identified by Muncie, free of charge. The recall began on December 9, 2013. Consumerr's may contact Altec at 1-877-462-5832. Altec's recall number is CSN 583.
Altec Industries Inc.Manufacturer number CSN 583View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

Altec AT237 by model year
YearComplaintsRecallsInvestigationsIssue Index
2013Viewing020
2012020
2011020
2010020
2008010
2007010
2006010

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.