RoadVitals

2016 Altec Digger Derrick Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
15
Newest Aug 29, 2025
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

15 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

25V562000

STRUCTURE:FRAME AND MEMBERS

Aug 29, 2025
903 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
The risk: A cable step that fails during use increases the risk of injury.
The remedy: Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.
Altec Industries, Inc.Manufacturer number CSN-3246View on NHTSA.gov
23V636000

EQUIPMENT:MECHANICAL:WINCH

Sep 14, 2023
53 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2004-2023 DL42 and DL45 Digger Derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
The risk: An uncontrolled load falling increases the risk of injury to personnel or others nearby.
The remedy: Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed October 6, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3113.
Altec Industries, Inc.Manufacturer number MAB 3113View on NHTSA.gov
23V216000

STRUCTURE:BODY

Mar 30, 2023
1,967 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
The risk: A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
The remedy: Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064.
Altec Industries, Inc.Manufacturer number CSN 3064View on NHTSA.gov
22V349000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:CONTROLS/CONTROL WIRING

May 18, 2022
477 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2016-2022 E-series & DH-H series Digger Derricks. The relay connectors may have been reattached to the incorrect plug after a stability test was performed. If the connections are not correct, the hydraulic overload protection system will not function.
The risk: A nonfunctional overload protection system may result in the operator unknowingly overloading the system, increasing the risk of injury.
The remedy: Altec will inspect and reattach the connectors, if necessary, free of charge. Owner notification letters were mailed on June 29, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 858.
Altec Industries, Inc.Manufacturer number CSN 858View on NHTSA.gov
21V559000

EQUIPMENT

Jul 22, 2021
878 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2016-2021 DH, D3000, DT65, and DT85 Digger Derricks. The operator may inadvertently move the pole guide joystick with their forearm due to the close proximity between the controls.
The risk: An unintentionally engaged joystick could result in uncontrolled movement of an unbalanced load, increasing the risk of injury.
The remedy: Altec will provide a guard kit to install over the pole guide controls, free of charge. Owner notification letters were mailed on September 15, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 829.
Altec Industries, Inc.Manufacturer number CSN 829View on NHTSA.gov
19V710000

EQUIPMENT

Oct 4, 2019
275 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2016-2019 Altec D2/3/4B, DLB, DMB, DHB, DT65 and DT80 Digger Derrick vehicles. The outrigger valves may be plumbed incorrectly. As a result, the outriggers could continue retracting after an operator has stopped controlling them.
The risk: If the outriggers continue to retract without command, the unit may become unstable and collapse, increasing the risk of injury or death to those nearby.
The remedy: Altec will notify owners, and dealers will inspect the outrigger valve plumbing correcting it as necessary, free of charge. The recall began November 25, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 739.
Altec Industries Inc.Manufacturer number CSN 739View on NHTSA.gov
19V365000

EQUIPMENT:OTHER:LABELS

May 13, 2019
1,036 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2009-2019 DL/DM, DL/DMB, DH, D/2/3/4, and DC Digger Derrick vehicles. The slope indicator placard card may falsely indicate that the unit could be used without leveling on a 5 degree slope.
The risk: An operator may improperly set up the unit, making the unit unstable, thus increasing the risk of injury.
The remedy: Altec will notify owners, and issue CSN 719 to owners, instructing them to remove the incorrect placards, free of charge. The recall began July 2, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 719.
Altec Industries Inc.Manufacturer number CSN 719View on NHTSA.gov
19V127000

EQUIPMENT

Feb 27, 2019
14,389 units potentially affected
The defect: Altec Industries, Inc (Altec) is recalling certain 2003-2019 Altec DL/DM, DL/DMB, and DC Digger Derrick vehicles. The pedestal tube welds may crack over time.
The risk: Unrepaired cracks may result in failure of the pedestal and uncontrolled movement increasing the risk of injury.
The remedy: Altec will notify owners and will provide repairs as necessary and a reinforcing kit. The recall began April 3, 2019. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 713.
Altec Industries Inc.Manufacturer number CSN 713View on NHTSA.gov
18V791000

ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES; ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS

Nov 9, 2018
331 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2008-2018 Altec AC18, AC23, AC26, AC30 and AC38 Cranes and D2B, D3A, D4A/B, DL42B, DT65 and DT80 Digger Derrick vehicles. The wiring on the 12V circuit from the chassis battery to the Power Distribution Module (PDM) may be insufficiently sized.
The risk: The insufficiently sized wire may overheat, increasing the risk of fire.
The remedy: Altec will notify owners, and dealers will replace the wiring to the PDM, with a larger wire and/or replace the circuit breaker, free of charge. The recall began January 9, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 703.
Altec Industries Inc.Manufacturer number CSN 703View on NHTSA.gov
18V745000

ELECTRICAL SYSTEM:SOFTWARE

Oct 22, 2018
175 units potentially affected
The defect: Altec Industries (Altec) is recalling certain 2014-2018 DHH and DHB Digger Derrick vehicles. The Zone Rating System may not alert the operator that the load being handled exceeds the rated load for the unit's specific position.
The risk: Without an alert, there is a greater risk of unit instability or a loss of load control, increasing the risk of injury.
The remedy: Altec will notify owners and dealers will update the Zone Rating System software, free of charge. The recall began December 12, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 700.
Altec Industries Inc.Manufacturer number CSN 700View on NHTSA.gov
18V379000

ELECTRICAL SYSTEM

Jun 7, 2018
44 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2016-2017 Altec Aerial Devices and Digger Derrick vehicles. The high voltage grounding system may be equipped with improperly sized cable connection receptacles causing the high voltage grounding system to fail.
The risk: If the grounding system fails, the user has an increased risk of injury.
The remedy: Altec will notify owners, and dealers will inspect the high voltage grounding system cable ring terminal connectors and replace any that are improperly sized, free of charge. The recall began on August 6, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 686.
Altec Industries Inc.Manufacturer number CSN 686View on NHTSA.gov
18V346000

ELECTRICAL SYSTEM:STARTER ASSEMBLY

May 25, 2018
133 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2016-2017 Digger Derrick DM, D2000, D3000, D4000 Series vehicles built on Freightliner M2106/V chassis. The starter cable may be improperly secured, allowing the cable to chafe which could result in an electrical short.
The risk: An electrical short can increase the risk of a fire.
The remedy: Altec will notify owners, and dealers will inspect and better secure the starter cable as needed, free of charge. The recall began July 20, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 683.
Altec Industries Inc.Manufacturer number CSN 683View on NHTSA.gov
17V107000

STRUCTURE

Feb 17, 2017
35 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2016 DLB Digger Derrick vehicles. The fasteners that secure the outer rotation bearings may fail.
The risk: If the fasteners that attach the rotation platform to the truck fail, the digger boom may unintentionally move, increasing the risk of injury to the user or those nearby.
The remedy: Altec has notified owners, and dealers will inspect and replace the fasteners, as necessary, free of charge. The recall began on February 24, 2017. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 650.
Altec Industries Inc.Manufacturer number MAB 650View on NHTSA.gov
16V536000

EQUIPMENT:MECHANICAL:WINCH

Jul 14, 2016
252 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain model year 2015-2016 Aerial Devices and Digger Derrick vehicles equipped with front bumper winches or capstans, manufactured December 26, 2015, to March 30, 2016. The affected vehicles have a hydraulic motor whose shaft may fail resulting in unexpected movement of the winch or the capstan.
The risk: Unexpected winch movement may increase the risk of injury.
The remedy: Altec will notify owners, and dealers will replace the hydraulic motor, free of charge. The recall began on August 26, 2016, 2016. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 635.
Altec Industries Inc.Manufacturer number CSN 635View on NHTSA.gov
16V307000

EQUIPMENT

May 16, 2016
63 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain model year 2014-2016 DL and DM Digger Derricks manufactured October 1, 2014, to April 30, 2016 with the digger booms mounted in the corner. The rotation bearing fasteners on the affected vehicles may not have been properly torqued.
The risk: If the fasteners are loose or improperly torqued, structural failure may result, causing unexpected movement of the digger derrick and increasing the risk of injury.
The remedy: Altec has notified owners, and instruct them to perform the annual torque inspection, free of charge. The recall began June 2, 2016. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 633.
Altec Industries Inc.Manufacturer number CSN 633View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources