2020 Blue Bird Vision School Bus

On March 17, 2023, the Office of Defects Investigation (ODI) opened PE23-004 to investigate instances of drag link separation in model year (MY) 2016-2020 Vision school buses manufactured by Blue Bird Body Company (Blue Bird). Since drag links are serviceable items that can wear out, ODI opened this investigation to understand why two drag links separated at the steering arm end shortly after having passed a routine inspection by multiple qualified entities.Two buses used in the same rural school district, owned and maintained by different bus contractors, had both undergone similar annual and semi-annual inspections prior to the start of the school year.Both failed within a week of each other, approximately a month into the school year. ODI interviewed the bus contractors and surveyed the industry to learn what inspection methods were being used and which ones were best at detecting wear in the components.ODI learned that the failed buses had not been inspected using the most thorough methods. ODI collected the drag links from each of the failed buses. Assisted by the Pennsylvania State Police Motor Carrier Enforcement Division and using best practice inspection methods, ODI identified and collected a pre-separation drag link from a neighboring school district.  The drag links underwent a teardown inspection at the Vehicle Research and Test Center (VRTC) jointly with Blue Bird and THK-Rhythm Automotive, the drag link manufacturer.In all cases, the visual analysis of each drag link end revealed that the grease at the steering arm end was dirty, discolored, and dry in texture, while the pitman arm end was still clean looking and fluid. ODI reviewed the information request data submitted by Blue Bird.No other separations had been reported.ODI contacted additional fleets to determine whether any other separations had occurred that had not been included in the submitted warranty and claim data.None were found. The grease fitting on the steering arm end is obscured by the steering arm itself.Therefore it is believed that inadequate maintenance resulted in the failures that had not been detected during the less-thorough prior inspections.Blue Bird has agreed to issue a notification to all owners to clearly identify all lubrication points and ensure all owners understand the proper lubrication and inspection methods.Blue Bird will also update their service manuals to convey the industry best practices of having someone turn the steering wheel while someone else inspects the drag links while the wheels are on the ground. Since the drag link failures appear to be caused by maintenance and inspection deficiencies and not due to a design, material or manufacturing issue, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances.

The mechanical brake switch & bracket design has a potential for cumulative at-limit stack up clearances to exceed the limitations of the mechanical switch. As a result, a preventative maintenance adjustment procedure is necessary and, at times, settings can be difficult to achieve.

Uploading documents that will be sent out to customers to educate them about draglink maintenance.

Uploading documents that will be sent out to customers to educate them about draglink maintenance.

A motor high temperature error can display on the instrument cluster when the OEM coolant valve in the closed position restricting coolant flow through the high voltage propulsion motor.

SM2022 EV Maintenance and Service Documentation This Service Memorandum is to announce information on Cummins Power Electric buses now available at Quickserve Online. Dealer must have access to Quickserve to obtain these service maintenance and repair procedures.

SM2203: EV Recommended Starting Procedure This Service Memorandum is to announce the proper starting procedure to be followed for all Cummins EV powered units. The sequence is required due to multiple electronic modules required to wake up and start communicating over the CAN (Controller Area Network) on EV Power Train Product”.