RoadVitals

1999 BMW 323I Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

NHTSA has issued a “do not drive” advisory affecting this model year.

Campaign 19V851000. Confirm whether your specific vehicle is covered using its VIN before acting on this.

Check your VIN on NHTSA.gov

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
7
Newest May 27, 2021
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
1
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

7 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

May 27, 2021
4,511 units potentially affected
The defect: BMW of North America, LLC (BMW) is recalling certain 2000-2001 BMW 3 Series (323Ci, 325Ci, 328Ci and 330Ci), 1999-2001 323i, 328i, 330i, 330xi, and 2000 323i, 328i stationwagon vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may absorb moisture, causing the inflator to explode or the air bag cushion to underinflate.
The risk: The inflator could explode during air bag deployment, resulting in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
The remedy: Dealers will replace the driver-side air bag inflator with a newly designed inflator, free of charge. Owner notification letters were mailed on July 12, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLCView on NHTSA.gov

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Nov 26, 2019
74,185 units potentially affected
The defect: BMW of North America, LLC (BMW) is recalling certain 1999-2001 323i, 325i, 328i and 330i and 2000-2001 323Ci, 325Ci, 328Ci, 330Ci, 323iT, and 325iT vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.
The risk: In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
The remedy: BMW notified owners, and Dealers will replace the driver air bag inflators, free of charge. The recall began November 10, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLCView on NHTSA.gov
19V851000NHTSA advisory: do not drive

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Nov 26, 2019
7,910 units potentially affected
The defect: BMW of North America, LLC (BMW) is recalling certain 1999 323i and 328i vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata at one specific inflator production facility. These inflators do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.
The risk: In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
The remedy: Dealers will inspect the driver air bag inflators and replace them, as necessary, free of charge. Owners may contact BMW customer service at 1-800-525-7417. Note: BMW recommends that owners do not continue to drive their vehicles.
BMW of North America, LLCView on NHTSA.gov

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Nov 26, 2019
34,396 units potentially affected
The defect: BMW of North America, LLC (BMW) is recalling certain 1999-2000 323i and 328i and 2000 323Ci and 328Ci vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These inflators do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.
The risk: In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
The remedy: BMW will mail interim notices informing owners of the safety risk on January 17, 2020. Owners will receive a second notice when the remedy becomes available. Dealers will inspect the driver air bag inflators and replace them, as necessary, free of charge. BMW mailed interim notices informing owners of the safety risk on January 17, 2020. The recall began July 27, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLCView on NHTSA.gov

AIR BAGS:SIDE/WINDOW

Aug 9, 2002
20,500 units potentially affected
The defect: ON CERTAIN 4-DOOR PASSENGER VEHICLES, THE SIDE AIR BAG SYSTEM COULD DEPLOY IN CERTAIN NON-CRASH IMPACTS, SUCH AS WHEN CONTACTING LARGE POTHOLES OR CURBS AT SUBSTANTIAL SPEEDS.
The risk: THIS COULD CAUSE THE SIDE AIR BAG AND HEAD PROTECTION SYSTEM TO DEPLOY WITHOUT AN ACTUAL SIDE CRASH OR IMPACT SEVERE ENOUGH TO CAUSE SIGNIFICANT VISIBLE DAMAGE TO THE VEHICLE. UNEXPECTED DEPLOYMENT OF THE SIDE AIR BAG COULD CAUSE SERIOUS INJURY IF THE OCCUPANT'S HEAD IS RESTING NEAR THE SIDE AIR BAG.
The remedy: DEALERS WILL RECALIBRATE THE CENTRAL AIR BAG CONTROL MODULE TO REDUCE THE POSSIBILITY OF SUCH A NON-CRASH DEPLOYMENT. OWNER NOTIFICATION BEGAN OCTOBER 25, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
BAYERISCHE MOTOREN WERKEManufacturer number E46View on NHTSA.gov

SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES

May 3, 1999
31,067 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. IT IS POSSIBLE THAT THE RETAINING CLIP THAT SECURES THE BRAKE BOOSTER PUSHROD TO THE BRAKE PEDAL ARM WAS NOT PROPERLY INSTALLED DURING PRODUCTION. IT IS POSSIBLE FOR THE CLIP TO DETACH FROM THE PIN ON THE BRAKE PEDAL ARM ALLOWING THE PUSHROD TO DISCONNECT FROM THE ARM.
The risk: IF THIS OCCURS, BRAKING IS NOT POSSIBLE.
The remedy: DEALERS WILL INSPECT THE CLIP FOR TIGHT INSTALLATION AND REPLACE THE CLIP IF IT IS LOOSE.
BAYERISCHE MOTOREN WERKEView on NHTSA.gov

AIR BAGS:SIDE/WINDOW

Mar 26, 1999
34,701 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES ARE BUILT WITH A SIDE AIR BAG SYSTEM CONSISTING OF DOOR-MOUNTED THORAX AIR BAGS (REAR DOOR AIR BAGS ARE OPTIONAL), A HEAD PROTECTION SYSTEM (HPS) FOR FRONT OCCUPANTS, A CENTRAL ELECTRONIC SENSOR AND DIAGNOSTIC SYSTEM, LEFT AND RIGHT SATELLITE IMPACT SENSORS, AND ASSOCIATED WIRING. THIS SYSTEM IS UNDULY SENSITIVE TO CERTAIN NON-CRASH IMPACTS, SUCH AS CONTACTING LARGE POTHOLES OR CURBS AT SUBSTANTIAL SPEED.
The risk: THIS COULD CAUSE THE SIDE AIR BAG AND HPS TO DEPLOY WITHOUT AN ACTUAL SIDE CRASH. IN ADDITION, THE BATTERY SAFETY TERMINAL (BST) WOULD ALSO ACTIVATE, DISCONNECTING THE STARTER CABLE FROM THE BATTERY. IN THIS CASE, VEHICLE ELECTRICAL SYSTEM WOULD CONTINUE TO OPERATE AND THE ENGINE WOULD CONTINUE TO RUN, BUT AFTER STOPPING, COULD NOT BE RESTARTED.
The remedy: DEALERS WILL REPROGRAM THE CENTRAL COMPUTER CONTROL MODULE THAT REGULATES THE PERFORMANCE OF ALL OF THE VEHICLE'S OCCUPANT PROTECTION SYSTEMS.
BAYERISCHE MOTOREN WERKEView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .