2012 BMW 535I

NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

BMW N63 Engine Powertrain Issues 2012 535i The N63 engine, utilized in various BMW models including the 2012 535i, has been subject to multiple customer complaints regarding premature timing chain wear and other powertrain-related issues. This led BMW to introduce a "Customer Care Package," detailed in Technical Service Bulletin (TSB) B110614, to address the concerns reported by multiple owners and noted by the National Highway Traffic Safety Administration (NHTSA) under ID Number 11016414. A primary cause of the issue is accelerated timing chain wear. The N63 engine's design features timing chains that are prone to stretching prematurely. This stretching can disrupt the precise timing of the engine's valves, leading to a cascade of problems. As a consequence, owners have reported a variety of symptoms, including the illumination of the "drivetrain malfunction" warning light, noticeable engine noise, excessive vibration, and potentially catastrophic engine failure. The "drivetrain malfunction" message, in particular, is a frequently cited indicator of this underlying powertrain problem. To address these widely reported issues, the N63 Customer Care Package was implemented. This service bulletin instructs authorized BMW technicians to perform a series of diagnostic tests. The main objective is to detect if the timing chains have stretched beyond acceptable tolerances. If excessive wear is confirmed, the TSB provides a detailed procedure for the necessary repairs. This often involves replacing the timing chains and related components to restore proper engine function. Beyond the core timing chain replacement, the Customer Care Package also includes several proactive and preventative measures. Technicians are instructed to check and potentially replace other components, such as fuel injectors and boost solenoids, which may have been impacted or contributed to the engine's performance issues. Furthermore, the service includes reprogramming the vehicle's software

NHTSA ID

11696232

Incident

Sep 6, 2025

The car was parked overnight. In the morning around dusk , it spontaneously caught fire.

NHTSA ID

11649879

Incident

Mar 22, 2025

UNKNOWN passenger restraint system malfunction message started coming.

NHTSA ID

11637534

Incident

Jan 21, 2025

The contact owns a 2012 BMW 535I. The contact stated while driving at approximately 65 MPH, the engine temperature and "Pull Over - Stop Vehicle" warning lights were illuminated. The contact pulled over and let the vehicle cool down and drove to an independent mechanic. The vehicle was diagnosed, and it was determined that the water pump needed to be replaced. The mechanic advised the contact that there was an active recall, NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 127,000.

NHTSA ID

11621488

Incident

Oct 14, 2024

Mileage

127,000 mi

The contact owns a 2012 BMW 535I. The contact stated while driving approximately 50–55 MPH, the engine overheated and the vehicle shutoff. The engine warning light was illuminated. The vehicle was restarted. The contact continued to drive to her residence. The contact stated that the failure was related to NHTSA Campaign Number: 16V746000 (Fuel System, Gasoline). The vehicle was towed to an independent mechanic, who determined that the failure was due to the fuel pump and the water pump. The water pump and fuel pump were replaced. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 119,000. The VIN was not available.

NHTSA ID

11609875

Incident

Jul 1, 2023

Mileage

119,000 mi

Confirmed by a Certified BMW repair center. Failure of Vanos Camshaft Gear Bolts. Recall has been issued for all 5 series models (and beyond) up to 2011, but does not include 2012 (5 series,) as it should. The Recall needs to be extended to include 2012 - 5 series models as failure of these bolts will cause immediate engine failure and could result in catastrophic crash, especially if driving at high speeds. I have contacted BMW of North America and they will not extend the recall until formal complaints, such as this, are received. My Issue with the Vanos Camshaft Bolts is currently being repaired (out of pocket) and I will share my invoice once received.

NHTSA ID

11568781

Incident

Jan 3, 2024

The headlights on the BMW 535 collect excessive amounts of condensation. If the condensation builds up, then the light does not function properly. The main safety concern is the malfunction of the turn signal. It will function in the rear of the vehicle but does not light up on the front in the affected headlight housing. Review of this problem on-line shows that this has occurred in many BMW vehicles and BMW also has issued a service bulletin for this problem (SI B63 05 16). As widespread as this problem is, I would think there would be a required recall for this service.

NHTSA ID

11506957

Incident

Jan 2, 2023

The front lights - water gets in impact visibility. The only repair is to replace the entire unit which is $2k per light. There is not other options. The adaptive warning sign does not go away due to this water.

NHTSA ID

11473074

Incident

Jul 8, 2022

The basic conditions for initializing the power windows are not met.

The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle “discharged battery” complaints.

Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE

Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicle’s equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.

The Dynamic Stability Control (DSC) warning light comes on while driving. The following DSC fault codes for the wheel speed sensors are stored: 480712 and/or 480715 and/or 480718 and/or 48071B They cannot be cleared, even though the wheel speed sensors work correctly and no problem can be found with the wiring harness.

After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.