RoadVitals

1999 Chevrolet Beretta

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Aug 2, 2000
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
0
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 1 NHTSA owner-reported complaint for the 1999 Chevrolet Beretta, most frequently naming the body & structure category. 8 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Body & structure1100.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

No recalls in our database for this model year

That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Body & structure
Filed Aug 2, 2000

CLUNKING NOISE UNDER DRIVER'S FLOORBOARD TURNING (USUALLY RT AND 5-25 MPH), THROUGH A DIP. DEALER COULD NOT DUPLICATE, SO NOT FIXED. DEEP, SOLID, METAL SOUND; COULD IT BE TORSION BAR HITTING CROSS-MEMBER ON FRAME? I'VE HAD THIS TRUCK IN FOR STEERING SHAFT (EVENTUALLY REPLACED W/UPDATED COMPLETE SHAFT AFTER 6 VISITS!), IN FOR CLUNKING WHEN ACCELERATING FROM STOP (FLUSHED TRANSFER CASE 2X AND NOW IS FINE), IN FOR NEW BELT AND TENSIONER, IN FOR NEW STEERING PUMP, IN FOR NEW REGULATOR IN PASSENGER WINDOW, IN FOR NEW REAR-END U-JOINT AND CREAKING REAR LEAF SPRINGS/BUSHINGS, IN FOR 4WD SERVICE LIGHT (MODE SWITCH REPLACED), IN FOR STICKY THROTTLE BODY, IN FOR ALIGNMENT PROBLEMS, IN FOR WIND NOISE ON DRIVER'S SIDE AROUND WINDSHIELD (NEVER FIXED!), IN FOR NOISY A/C (FOAM FROM FACTORY STUCK IN SYSTEM), FUEL GAGE SENSOR REPLACED BEFORE TAKING DELIVERY. TIRED OF THIS TRUCK, BUT CAN'T AFFORD TO GET A DIFFERENT ONE DUE TO DEPRECIATION FACTOR!

NHTSA ID
726431
Incident
Jul 15, 2000

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

17-NA-073

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This warranty administration bulletin provides information regarding the field action courtesy transportation policy.

16NA260

EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.

THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS.

Recalls

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Vehicle Recalls

99-08-51-007F

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS

Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

99-08-51-007F

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS

Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

PI0281D

EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS

Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Chevrolet Beretta by model year
YearComplaintsRecallsInvestigationsIssue Index
2002100—
1999Viewing100—
1998200—
1997100—
1996722050.9
1995931044.8
1994852052.7
1993370145.8
1992521254.2
1991491658.0
1990392560.4
1989515667.7
19886051764.9
19873610—
1984100—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.