RoadVitals

1985 Chevrolet C70 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Dec 22, 1986
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

86V170000

STEERING:HYDRAULIC POWER ASSIST SYSTEM

Dec 22, 1986
9,038 units potentially affected
The defect: THE POWER STEERING ASSIST CYLINDER MOUNTING BRACKET BOLTS MAY LOOSEN DUE TO PAINT ON THE BOLT THREADS AND THE MOUNTING BRACKET MATING SURFACE. CONSEQUENCE OF DEFECT: THIS MAY RESULT IN LOOSENESS AND ERRATIC STEERING DURING FULL TURNS. WITH CONTINUED OPERATION POWER CYLINDER COULD DETACH FROM THE FRAME RAIL RESULTING IN RESTRICTED STEERING, SEVERING OF FRONT BRAKE HOSE AND LOSS OF FRONT AXLE BRAKING. WITH EITHER CONDITION, A VEHICLE CRASH COULD RESULT.
The remedy: REMOVE PAINT FROM MATING SURFACES OF BRACKET AND FRAME RAIL; REPLACE POWER STEERING ASSIST CYLINDER MOUNTING BOLTS.
GENERAL MOTORS CORP.View on NHTSA.gov
86V081000

STEERING:LINKAGES:ARM:IDLER AND ATTACHMENT

Jun 23, 1986
499 units potentially affected
The defect: STEERING CONTROL ARM CAN BE OVERSTRESSED WITH HEAVY STEERING INPUT CAUSING IT TO CRACK AND IT COULD EVENTUALLY BREAK COMPLETELY. CONSEQUENCE OF DEFECT: IF THE STEERING CONTROL ARM BREAKS, COMPLETE LOSS OF STEERING ABILITY AND TRUCK CONTROL WOULD OCCUR WITHOUT WARNING WHICH COULD RESULT IN AN ACCIDENT.
The remedy: INSTALL NEW STEERING ARM AND OTHER STEERING SYSTEM HARDWARE WHICH WILL PREVENT OVERSTRESSING INPUT CONDITIONS FROM OCCURRING.
GENERAL MOTORS CORP.View on NHTSA.gov
86V015000

PARKING BRAKE:INDICATOR LIGHT

Jan 4, 1986
4,967 units potentially affected
The defect: THE PARKING BRAKE ACTUATING LEVER CAM MAY CONTAIN A QUENCH CRACK WHICH CAN WIDEN, REDUCING THE HOLDING CAPABILITY OF THE PARKING BRAKES. CONSEQUENCE OF DEFECT: THE REDUCED HOLDING CAPABILITY OF THE PARKING BRAKE COULD ALLOW AN UNATTENDED TRUCK TO ROLL AWAY UNCONTROLLED, WHICH MAY LEAD TO AN ACCIDENT.
The remedy: INSTALL A NEW ACTUATION LEVER.
GENERAL MOTORS CORP.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources