Transmission
Filed Jul 5, 2005
TRANSMISSION FAILURE
- NHTSA ID
- 10127494
- Incident
- Mar 22, 2005
- Mileage
- 64,000 mi
1999 Chevrolet P Series
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Jul 5, 2005
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
0
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0
Overview
Our database contains 1 NHTSA owner-reported complaint for the 1999 Chevrolet P Series, most frequently naming the transmission category. 30 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 1 month of data.
What owners report
Complaints grouped by the component NHTSA recorded
- Transmission1100.0%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
No recalls in our database for this model year
That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
17-NA-073
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
16NA260
EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS.
G-197151
FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS
00064H - SPECIAL COVERAGE (REVISED PART INFORMATION). SOME CUSTOMERS MAY EXPERIENCE A FAILURE OF THE ELECTRONIC DIESEL FUEL INJECTION PUMP. THIS SPECIAL POLICY APPLIES ONLY TO ELECTRONIC DIESEL-FUEL INJECTION PUMP REPAIRS AND/OR REPLACEMENT AS A RESULT OF INJECTION PUMP FAILURE. THIS SPECIAL COVERAGE DOES NOT COVER: GLOW PLUGS, TURBOCHARGER WEAR, LOW COMPRESSION ENGINES OR PCM/PCM WIRING CONDITIONS.
Recalls
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Vehicle Recalls
99-08-51-007F
EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
99-08-51-007F
EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
| Year | Complaints | Recalls | Investigations | Issue Index |
|---|---|---|---|---|
| 2002 | 0 | 0 | 0 | — |
| 2001 | 0 | 0 | 0 | — |
| 2000 | 0 | 0 | 0 | — |
| 1999Viewing | 1 | 0 | 0 | — |
| 1998 | 2 | 0 | 0 | — |
| 1997 | 1 | 0 | 0 | — |
| 1996 | 1 | 0 | 0 | — |
| 1995 | 4 | 0 | 0 | — |
| 1994 | 2 | 0 | 0 | — |
| 1993 | 1 | 0 | 0 | — |
| 1992 | 1 | 0 | 0 | — |
| 1991 | 1 | 0 | 0 | — |
| 1990 | 0 | 0 | 0 | — |
| 1989 | 1 | 0 | 0 | — |
| 1988 | 0 | 0 | 0 | — |
| 1987 | 1 | 0 | 0 | — |
| 1986 | 0 | 0 | 0 | — |
| 1985 | 0 | 0 | 0 | — |
| 1984 | 0 | 0 | 0 | — |
| 1983 | 0 | 0 | 0 | — |
| 1982 | 0 | 0 | 0 | — |
| 1970 | 0 | 1 | 0 | — |
| 1969 | 0 | 1 | 0 | — |
| 1968 | 0 | 1 | 0 | — |
| 1967 | 0 | 1 | 0 | — |
| 1966 | 0 | 1 | 0 | — |
| 1965 | 0 | 1 | 0 | — |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.