HEADLIGHT, HIGH AND LOW BEAMS, FAILED. SEEMS TO BE DUE TO MELTED PLASTIC IN CONNECTOR BOX IN RIGHT FRONT OF VEHICLE. *TR
- NHTSA ID
- 10485245
- Incident
- Nov 19, 2012
- Mileage
- 8,200 mi
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 3 NHTSA owner-reported complaints for the 2009 Ducati M1100S, most frequently naming the fuel system, driver assistance and exterior lighting categories. 25 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 3 months of data.
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
No recalls in our database for this model year
That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.
Reports submitted to NHTSA, shown in the owner's own words
HEADLIGHT, HIGH AND LOW BEAMS, FAILED. SEEMS TO BE DUE TO MELTED PLASTIC IN CONNECTOR BOX IN RIGHT FRONT OF VEHICLE. *TR
MY MOTORCYCLE HAS A PLASTIC TANK THAT EXPANDED AND CAUSED THE TANK TO SPILL AND IT DEFORMED TOO IMPEDING NORMAL STEERING. THIS IS THE SECOND TIME THIS HAPPENS!!! THEY ARE REPLACING (NOW THEY ARE SAYING THAT MY AFTERMARKET EXHAUST COULD BE AN ISSUE BUT IT IS NOT. I HAVE NOT MODIFIED THE BIKE IN ANY WAY THAT WOULD AFFECT THE TANK AND THE FUEL PUMP OR THE FUEL FLANGE) THESE TANKS WITH THE SAME KIND!!! I AM WORRIED THIS BIKE IS NOT SAFE. *TR
1. MOTORCYCLE IS PARKED IN MY GARAGE WITH ABOUT 800 MILES ON THE ODOMETER AND IN AS-NEW CONDITION. 2. FUEL BEGAN LEAKING FROM AROUND THE FUEL PUMP FLANGE AT THE BASE OF THE TANK. THIS DRIP IS NEXT TO AN EXHAUST HEADER PIPE ONTO THE REAR OF THE ENGINE BLOCK. UPON INVESTIGATION IT BECAME CLEAR THAT THE PLASTIC TANK HAS DEFORMED (WARPED) AROUND THE FLANGE, OPENING A GAP FOR FUEL TO DRIP RAPIDLY FROM THE TANK. *TR
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
SUSPENSION
Procedure for Assessing Front Fork Oil Leaks. Applicability: All Models. This service repair bulletin informs dealers and service managers of the assessment criteria for identifying front fork-related defects. The purpose is prevent technicians from mistaking oozing oil or assembly grease, for legitimate defects. The bulletin further provides examples and pictures for clarification.
SERVICE BRAKES, HYDRAULIC
Guided Diagnosis for Front Brake System Bleeding. Applicability: All Models. This Service Bulletin replaces and cancels the previous bulletin SRV-SRB-20-014 published on 4/17/2020. It provides dealers and service managers with needed information to correctly bleed the front brake system of the various Ducati models. This bulletin further refers the reader to an attached diagnosis guide. The referenced guide/annex is available to NHTSA upon request.
ENGINE AND ENGINE COOLING; POWER TRAIN
Finial Drive Chain Maintenance Precautions. Applicability: All Models and Model Years (except XDiavel). This Service Bulletin replaces and cancels the previous bulletins: SRV-SRB-18-030 published on 05/11/2018, SRV-SRB-19-046 published on 12/31/2019, SRV-SRB-20-050 published on 11/24/2020. It provides dealers and service managers additional final drive chain care to ensure optimum performance and longevity for the chain. this includes cleaning, lubricating, inspecting and tension guidelines.
ENGINE AND ENGINE COOLING
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine_Rev.01. Applicability: All Models. This service repair bulletin instructs dealers and service managers on authorized procedures for identifying and isolating coolant and engine oil leaks. The use of a prescribed leak trace powder is stressed. This bulletin includes service instructions.
ENGINE AND ENGINE COOLING
Precautions to Follow During Crankcase Cleaning. Applicability: All Models. This service bulletin informs dealers and service managers about precautions in using abrasive cleaners for engine component sealant, and in particular the crankcase covers. The bulletin further provides cleaning instructions with approved cleaning tools.
ENGINE AND ENGINE COOLING
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine. Applicability: All Models. This service bulletin provides dealers and service managers with troubleshooting guidance for oil or coolant leaks. This bulletin includes service instructions.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
| Year | Complaints | Recalls | Investigations | Issue Index |
|---|---|---|---|---|
| 2010 | 0 | 0 | 0 | — |
| 2009Viewing | 3 | 0 | 0 | — |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.