Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 6 NHTSA owner-reported complaints for the 2006 Ducati S4 R 2006, most frequently naming the fuel system, body & structure and suspension categories. 24 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
| Month | Complaints filed | Cumulative |
|---|---|---|
| Jul 2007 | 1 | 1 |
| Aug 2009 | 1 | 2 |
| Jun 2010 | 3 | 5 |
| Jul 2010 | 1 | 6 |
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
No recalls in our database for this model year
That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.
Reports submitted to NHTSA, shown in the owner's own words
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNITION SWITCH TO CLOSE IT. THE RUBBER MOUNTS NO LONGER SIT ON THE FRAME. *TR
2006 DUCATI S2R800 "PLASTIC" FUEL TANK STARTING TO DEFORM. NOT RETAINING ORIGINAL SHAPE. CONCERNS OF POSSIBLE RUPTURE OR LEAKS. GETTING WORSE WITH AGE. UNDER WARRANTY IN 2008, A DUCATI SHOP EXAMINED THE FUEL TANK AND DISMISSED IT AS WARRENTABLE. DATE BELOW IS APPROXIMATE. *TR
EXPANDING AND LEAKING PLASTIC FUEL TANK. PRESENTS FIRE DANGER AND ILL FITMENT IN THE FRAME. *TR
THE PLASTIC FUEL TANK ON MY MOTORCYCLE IS DEFORMING. AS A RESULT, IT IS DIFFICULT TO REMOVE THE TANK FROM THE BIKE, AND THE TANK DOES NOT SIT PROPERLY ON THE FRAME. *TR
DUCATI MOTORCYCLE GAS TANK. THE BASIC SHAPE AND FORM OF THE TANK IS DEFORMING AND BULGING. UNEVEN BUMPS APPEARING ON THE SURFACE. *TR
SPRING SAG IN THE FRONT SUSPENSION CAUSES A DROP IN STEERING ANGLE AS A RESULT THE BIKE BECOMES UNSTABLE AT NORMAL ROAD SPEEDS, VERY UNSTABLE IN WINDY CONDITIONS. THE SAG IN SUSPENSION IS APPROX 50% OF NORMAL SUSPENSION TRAVEL. *JB
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
SUSPENSION
Procedure for Assessing Front Fork Oil Leaks. Applicability: All Models. This service repair bulletin informs dealers and service managers of the assessment criteria for identifying front fork-related defects. The purpose is prevent technicians from mistaking oozing oil or assembly grease, for legitimate defects. The bulletin further provides examples and pictures for clarification.
SERVICE BRAKES, HYDRAULIC
Guided Diagnosis for Front Brake System Bleeding. Applicability: All Models. This Service Bulletin replaces and cancels the previous bulletin SRV-SRB-20-014 published on 4/17/2020. It provides dealers and service managers with needed information to correctly bleed the front brake system of the various Ducati models. This bulletin further refers the reader to an attached diagnosis guide. The referenced guide/annex is available to NHTSA upon request.
ENGINE AND ENGINE COOLING; POWER TRAIN
Finial Drive Chain Maintenance Precautions. Applicability: All Models and Model Years (except XDiavel). This Service Bulletin replaces and cancels the previous bulletins: SRV-SRB-18-030 published on 05/11/2018, SRV-SRB-19-046 published on 12/31/2019, SRV-SRB-20-050 published on 11/24/2020. It provides dealers and service managers additional final drive chain care to ensure optimum performance and longevity for the chain. this includes cleaning, lubricating, inspecting and tension guidelines.
ENGINE AND ENGINE COOLING
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine_Rev.01. Applicability: All Models. This service repair bulletin instructs dealers and service managers on authorized procedures for identifying and isolating coolant and engine oil leaks. The use of a prescribed leak trace powder is stressed. This bulletin includes service instructions.
ENGINE AND ENGINE COOLING
Precautions to Follow During Crankcase Cleaning. Applicability: All Models. This service bulletin informs dealers and service managers about precautions in using abrasive cleaners for engine component sealant, and in particular the crankcase covers. The bulletin further provides cleaning instructions with approved cleaning tools.
ENGINE AND ENGINE COOLING
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine. Applicability: All Models. This service bulletin provides dealers and service managers with troubleshooting guidance for oil or coolant leaks. This bulletin includes service instructions.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.