2020 Dynamax Isata

According to FCA Recall 24V896: "The brake hydraulic control unit could fail. Over time, this could cause the antilock braking system (ABS), electronic stability control (ESC) system and/or traction control not to work. An antilock braking system, electronic stability control system and/or traction control system that doesn't work could increase the risk of a crash."

As per recall 23V100. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Sprinter (907 platform) vehicles, the fuse layout of the interior blower motor might not meet the requirements for prolonged operation at the highest blower setting. Influenced by certain premises, such as ambient and assembly space temperatures as well as usage, this could lead to an increase of the transitional resistance between fuse and fuse holder and thus, to a limit-exceeding heat development in the area of the fuse holder. Consequently, a risk of fire during operation and a risk of injury cannot be ruled out.

According to the Interim Recall Notice Received by Mercedes-Benz concerning 22V796: "Mercedes-Benz AG has determined that on certain Sprinter vehicles, a component of the park lock system might wear extraordinarily due to specific driver parking practices and impair safe parking of the vehicle. If the vehicle is not properly secured in accordance with parking instructions in the operator's manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. The driver will not receive a warning due to the nature of the failure mechanism. It is important that the driver ensures that the manual parking brake is engaged to adequately secure the vehicle against rolling away. Additionally, the parking level "P" is only to be inserted when the vehicle is completely stationary. The customer can find precise information on the parking process and on correct vehicle securing in their operator manual. Owners who notice any issues with the automatic transmission park lock function may contact their nearest Mercedes-Benz service partner immediately and have an appointment arranged for the vehicle to be inspected."

Per FCA recall 22V759: FCA US has decided that certain vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 106 - Brake hoses. Constriction requirement states, "Except for that part of an end fitting which does not contain hose, every inside diameter of any section of a hydraulic brake hose assembly shall be not less than 64 percent of the nominal inside diameter of the brake hose." Brake hoses that have an out of specification orifice diameter have an inside diameter that is less than the 64 percent requirement.

*Notice* This was received by Mercedes-Benz Canada - This was a recall conducted in Canada by Mercedes-Benz. To Forest River's knowledge, only vehicles manufactured and shipped into Canada are affected. According to Mercedes-Benz AG Group (MBAG): Mercedes-Benz AG Group (MBAG) has determined that on certain MY 2019-2020 Sprinter vehicles with diesel engines, the control unit software may not meet OBD functionality specifications. In the potentially affected vehicles, several OBD diagnostics and functions of the engine control unit, transmission control unit, and dosing control unit might not meet OBD functionality specifications. In case of the described issue, there is no impact on emissions, safety or drivability. There are no specific precautions to be taken with respect to the subject issue until the corrective measures are implemented.

MBAG Recall 22V360 has determined that on certain Mercedes-Benz Sprinter vehicles, the communication module's SIM card might become disabled and prevent a connection with a mobile phone network. In this case, the manual as well as the automatic eCall function would not be available, which could preclude or delay the arrival of emergency responders. This might increase the risk of an injury following an emergency event. The supplier of the SIM card will update the SIM profile of the communication modules on the affected vehicles. This update is planned to be performed over-the-air with no workshop visit being required. If the over-the-air update cannot be successfully completed, the customer will be notified and advised to visit an authorized dealer to have the update performed.