Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 3 NHTSA owner-reported complaints for the 2007 Harley-Davidson Fxdb, most frequently naming the brakes, powertrain (other) and steering categories. 1 safety recall has been issued covering this model year; and 13 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 3 months of data.
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govTIRES
Reports submitted to NHTSA, shown in the owner's own words
REAR WHEEL LOCKED UP WHEN ACCELERATING FROM STOP AT TRAFFIC LIGHT. MOTORCYCLE STALLED AND I COULD NOT GET IT TO MOVE FORWARD. THOUGHT BRAKE WAS STUCK, BUT AFTER VISUAL INSPECTION NOTICED ALL THE BOLTS (5) IN THE REAR SPROCKET HAD SHEARED OFF. IT DOES NOT APPEAR THAT THE BOLTS BACKED OUT OF THE WHEEL HUB, BECAUSE PART OF THE BOLTS REMAINED IN THE BOTTOM OF THE THREADED PORTION OF THE HUB. AFTER REMOVING THE WHEEL AND INSPECTING THE DAMAGE IT APPEARS THAT THE STAINLESS BOLTS, ALUMINUM HUB AND LOOSE FITTING HOLES IN THE SPROCKET ALL PLAYED A ROLE IN THE FAILURE. NOTE: TO THE BEST OF MY KNOWLEDGE ALL PARTS ARE STOCK PARTS AND AS INSTALLED BY THE FACTORY. AN INTERNET SEARCH REVEALED NUMEROUS FORUMS ON HARLEY MOTORCYCLES WITH OWNERS COMPLAINING ABOUT THIS FAILURE. I READ FORUM POST FROM 2003 TO FEBRUARY 2011 DISCUSSING THE SHEARED SPROCKET BOLTS, AND REFUSAL FROM HARLEY TO ADDRESS THIS ISSUE. I BELIEVE THIS IS A VERY SERIOUS SAFETY PROBLEM THAT DEMANDS THE ATTENTION FROM NHTSA TO PROTECT THE SAFETY OF THE PUBLIC. I WORK IN THE POWER INDUSTRY AND HAVE WITNESSED ROOT CAUSE FAILURES DUE TO CORROSION OF DISSIMILAR METALS - ALUMINUM AND STEEL, STRESS CRACK CORROSION CAUSED BY HIGH MOISTURE, AND STRESS RISERS CAUSED AT THREADS FROM LOOSE FITTING PARTS FLEXING WHEN TORQUE. ALL OF THESE CONDITIONS EXISTS IN THE DESIGN AND INSTALLATION OF THE SPROCKET AT THE REAR WHEEL INSTALLED ON THIS MOTORCYCLE. I HAVE THE PARTS AVAILABLE FOR INSPECTION AND ANALYSIS IF REQUESTED BY NHTSA AND OR HARLEY DAVIDSON COMPANY. *TR
WHILE RIDING MY 2007 HARLEY DAVIDSON FXDBI, THE LEFT SIDE UPPER SHOCK MOUNT BOLT SHEARED. THIS NEARLY CAUSED ME TO LOSE CONTROL OF THE MOTORCYCLE. *TR
TL*THE CONTACT OWNS A 2007 HARLEY DAVIDSON FXDB. WHILE DRIVING 20-70 MPH, THE VEHICLE JERKED SLIGHTLY, VIBRATED WHEN TURNING, AND MADE A POPPING SOUND. THE FAILURES ALSO OCCURRED WHEN THE FRONT BRAKES WERE APPLIED. THE DEALER CHANGED THE BEARINGS IN THE STEERING COLUMN, BUT THE FAILURE RECURRED. THE CURRENT MILEAGE WAS 4,127 AND FAILURE MILEAGE WAS 300.
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.
ENGINE; FUEL/PROPULSION SYSTEM; POWER TRAIN; VEHICLE SPEED CONTROL
SERVICE BULLETIN M1650: MILWAUKEE EIGHT AND TWIN CAM CAMSHAFT DRIVE GEAR RETENTION KIT CHANGES. PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 N·m) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).
ELECTRICAL SYSTEM
SERVICE BULLETIN M1490 (V 24.8.8): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.
ENGINE; POWER TRAIN
GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1490 (V 24.6.4): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution® Max, and 2024 Touring.
ENGINE AND ENGINE COOLING; POWER TRAIN; VEHICLE SPEED CONTROL
SERVICE BULLETIN M1612 (REV A): MILWAUKEE-EIGHT AND TWIN CAM TRANSMISSION GEAR PACKS. Purpose: Revision. Update: Notes for Table 3 and 4. * Updated: Part Numbers. This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware. Models Affected: 2006-2017 Twin Cams: Dyna models 2007-2016 Twin Cams: CVO, Police, Touring and Trike models 2007-2017 Twin Cams: Softail models 2017-2024 Milwaukee-Eight: CVO, Police, Touring and Trike models 2018-2024 Milwaukee-Eight: Softail models
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.