Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 7 NHTSA owner-reported complaints for the 2003 Harley-Davidson Fxdl, most frequently naming the engine, fuel system and transmission categories. 1 safety recall has been issued covering this model year; and 6 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
| Month | Complaints filed | Cumulative |
|---|---|---|
| Aug 2002 | 1 | 1 |
| May 2003 | 1 | 2 |
| Jul 2003 | 1 | 3 |
| Feb 2004 | 2 | 5 |
| Aug 2006 | 1 | 6 |
| May 2011 | 1 | 7 |
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govEXTERIOR LIGHTING:TAIL LIGHTS
Reports submitted to NHTSA, shown in the owner's own words
TL*THE CONTACT OWNS 2003 HARLEY DAVIDSON DYNA GLIDE FXDL. THE CONTACT STATED THAT THE MOTORCYCLE HAD AN UNUSUAL NOISE COMING FROM THE ENGINE. THE VEHICLE WAS TAKEN TO A LOCAL MECHANIC WHO DIAGNOSED THAT THE TWIN CAM CHAIN TENSIONER WAS DEFECTIVE AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS CONTACTED BUT OFFERED NO ASSISTANCE SINCE THERE WERE NO RELATED RECALLS. THE MOTORCYCLE WAS NOT REPAIRED. THE FAILURE AND CURRENT MILEAGE WAS 58,000. UPDATED 6/8/11 *CN UPDATED 06/23/11
MY HARLEY DAVIDSON MOTORCYCLE STALLED OUT ON TWO SEPARATE OCCASIONS. THE LATER BEING THE DATE OF INDICANT. THE STALL WAS CAUSED BY THE SEPARATION OF THE LINING ON THE INSIDE THE FUEL TANK. SMALL PIECES OF THIS LINING GOT INTO THE CARBURETOR AND CUT OFF THE FUEL SUPPLY FROM GETTING THROUGH THE PRIMARY AND SCENERY JETS. *JB
WHILE RIDING THE MOTORCYCLE THE DRIVER FELT A VIBRATION IN THE REAR. THE REAR WHEEL SUDDENLY LOCKED UP AND THREW THE DRIVER TO THE GROUND. THE DEALER HAS BEEN CONTACTED. *NM
I AM AN ATTORNEY IN 2 CASES WHERE 2003 MODELS OF HARLEY DAVIDSON MOTORCYCLES, BEING DRIVEN JUST A FEW MILES AWAY FROM THE DEALERS AFTER PURCHASE, SUFFERED CATASTROPHIC FAILURES OF THE FRONT FORKS. ONE RIDER DIED, AND THE OTHER SUFFERED SEVERE INJURY. POROSITY OF THE FORK APPEARS TO HAVE BEEN A SUBSTANTIAL FACTOR OF THE FAILURES. ONE OCCURRED IN JUNE 2003; AND THE OTHER, THE FATALITY OCCURRED IN OREGON IN OCTOBER 2003. I HAVE LISTED ONLY THE FATALITY INFORMATION BELOW. INVESTIGATION IS CONTINUING. *JB
PROBLEMS WITH DYNA LOW RIDER.*MR WHILE DRIVING BIKE AT 55 TO 60 MPH, THE MOTORCYCLE VIBRATED SO BAD IT PUT THE CONSUMER HANDS TO SLEEP. THE SHOCKS BOTTOMED OUT WHEN GOING OVER LITTLE BUMPS IN THE ROAD. THE TRANSMISSION MADE A NOISE WHEN SHIFTING GEARS. *TS. THERE WAS ALSO A RATTLE IN THE MOTOR WHEN FIRST STARTED FOR 5-10 MINUTES, BUT CEASED WHEN THE MOTOR BECAME HOT, THE FUEL GAUGE DISPLAYED EMPTY WHEN THERE WAS 2 GALLONS OF GAS LEFT. *JB
THERE WAS A PROBLEM WITH THE KICK STAND, AND THE MOTORCYCLE COLLAPSED. *JB
TURNING SIGNAL AND BRAKE LIGHT WIRING IS IN WAY OF REAR WHEEL,WIRE COULD BE CUT AND RESULT IN VEHICLE FAILURE. *AK
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1490 (V 24.8.8): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.
ENGINE; POWER TRAIN
GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1490 (V 24.6.4): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution® Max, and 2024 Touring.
POWER TRAIN
TECH ARTICLE TA0023: TA0023: Crankshaft Rod Bearing. Purpose: Technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the Twin Cam and Milwaukee-Eight® crank pin bearings are maintained to a very tight range. This optimizes performance and maintains low mechanical noise in operation. The connecting rod bore can also distort slightly in operation due to stress relaxation. As a result, bearing clearance decreases due to the contact zone broadening and the load being distributed over more rollers. The combination of a bore being slightly out of round and reduced bearing clearance can result in varying degrees of resistance through the range of motion. Axial clearance is also tightly controlled for proper alignment. For these reasons, zones of resistance can be found when the connecting rods are rotated by hand through their range of motion. Resistance during rod motion, by itself, is not an indication of a performance or durability concern.
ENGINE; EQUIPMENT
THIS DOCUMENT WILL OUTLINE INSPECTION AND MEASUREMENT PROCEDURES FOR GEROTOR STYLE OIL PUMPS. IT PROVIDES INSPECTION PROCEDURES ONLY WITHOUT SPECIFICATIONS.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.