2015 Hyundai Genesis Coupe

The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by the equipment supplier Mando. The Part 573 Recall Reports contain varying defect descriptions and differing remedy descriptions for the same or similar equipment supplied by Mando. Safety recalls included in this Audit Query (AQ) review include: Hyundai recalls 20V-520, 20V-543, 21V-161, 21V-160, 21V-303, 22V-056, 22V-810, and 23V-651. Kia recalls 16V-815, 20V-518, 20V-519, 21V-137, 21V-331, 22V-051, 22V-800, and 23V-652 The purpose of this AQ is to evaluate the timeliness and scoping of Hyundai and Kia’s defect decision making and adherence with reporting requirements; and understand the varying defect descriptions and remedies between these recalls.

The differential mounting bolt on the passenger side (the only one on that side) backed out and broke causing that side of the differential to smack the bottom of the car and then sag on the passenger side after letting off the throttle. Once it dropped it made the car come to a compete stop fast. Luckily there was no accident. This exact issue has already been fixed previously under recall, due to this the dealership nor manufacturer is wanting to fix it under the recall again. My case number with hyundai [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11660908

Incident

Apr 6, 2025

My car was leaking brake fluid but no spots on ground. My brakes started locking and not work at all. After having car serviced multiple times my brakes completly stopped all together. Left for mechanic and my car in the engine bay caught fire. Burned completly for total loss. ABS modularor had recall causing engine bay fires. Was wondering if this was why

NHTSA ID

11624370

Incident

Aug 6, 2024

The contact owns a 2015 Hyundai Genesis Coupe. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA ID

11593408

Incident

Sep 22, 2023

The contact owns a 2015 Hyundai Genesis Coupe. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that when he turned his vehicle on the ABS warning light illuminated. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 73,100. VIN tool confirms parts not available.

NHTSA ID

11587285

Incident

Nov 14, 2023

Mileage

73,100 mi

The contact owns a 2015 Hyundai Genesis Coupe. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA ID

11581749

Incident

Apr 8, 2024

In cold weather, instrument panel can take over 10 minutes to boot up and function.

NHTSA ID

11579868

Incident

Nov 1, 2023

The contact owns a 2015 Hyundai Genesis Coupe. The contact stated while driving 10–20 MPH, the vehicle went into LIMP Mode in the first twenty minutes of driving. The vehicle speed was reduced. The check engine warning light was illuminated. The vehicle was taken to the local dealer, but the dealer was unable to determine the cause of the failure. The dealer cleared the DTC codes. The vehicle was not diagnosed or repaired. While driving, the check engine light warning illuminated. The vehicle was taken to another local dealer, Happy Hyundai (9121S Cicero Ave. Oak Lawn, IL 660453), where it was diagnosed that the accelerator position sensor needed to be replaced. The throttle body needed to be cleaned and replaced. The vehicle was not repaired. The manufacturer was contacted. The approximate failure mileage was 34,000.

NHTSA ID

11575277

Incident

Nov 1, 2021

Mileage

34,000 mi

There is a code that comes on my car, makes the engine light come on then it goes out on its own . And every year it’s back on same code. Has been happening for years . I took it to the dealership 2xs for the same reason each time they said nothing was wrong cleared the code and the engine light went out. This year being the 9th year having the vehicle the engine light kept coming back on every day after it was cleared and nothing found. So the Happy Hyundai dealership ship said leave the car overnight and see if the engine light is back on and if so he can see then what the issue is because it won’t be historical. I paid $212 for diagnostic, and then a few days he said leave overnight. He discovered that the throttle body had an issue and suggested cleaning. But the car goes in limp mode and I couldn’t accelerate but 20-25 mph. The first 20 mins of driving every day. Then it takes off. He determined that an accelerator pedal position sensor was bad. And I went years without any one diagnosing this. My car only has 34550miles approximately. And it’s almost 9 years old. 34k miles a sensor shouldn’t be bad that soon. The codes were P0651/ and P2106. And now in 2024, someone finally figured it out. But now it’s been almost 9 years and I’m paying $900 or 1k for replacement when it was clearly something wrong years ago . Undiagnosed.

NHTSA ID

11574379

Incident

Feb 1, 2024

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.

This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

This bulletin outlines the basic components of the BG Fuel Test Kit and the procedure to test the quality of the fuel during vehicle diagnosis. Poor fuel quality may lead to cold engine startability issues, hesitation at idle or during acceleration, and/or poor driveability. In addition, prolonged vehicle operation with poor quality fuel may result in damage to the fuel system and formation of engine deposits. The BG Fuel Test Kit can be used to determine the following aspects of the fuel: • Sediment / Water Contamination Inspection • Specific Gravity • Alcohol Content