RoadVitals

2002 International 4300 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
9
Newest Aug 27, 2003
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

9 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

03V317000

SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS

Aug 27, 2003
686 units potentially affected
The defect: CERTAIN HEAVY DUTY TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE PRIMARY AND SECONDARY AIR SUPPLY HOSES FROM THE FOOT VALVE TO THE PRIMARY AND SECONDARY AIR TANKS WERE IMPROPERLY ROUTED AT THE TANK.
The risk: IF THE PRIMARY AIR CIRCUIT IS DAMAGED, THE BRAKES WILL NOT APPLY WHEN THE BRAKE PEDAL IS DEPRESSED INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSPECT AND REPAIR VEHICLES. OWNER NOTIFICATION WILL BE COMPLETED BY OCTOBER 3, 2003. OWNERS WHO TAKE THEIR VEHICLE TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 03514View on NHTSA.gov
03V161000

VISIBILITY:WINDSHIELD WIPER/WASHER

Apr 29, 2003
15,354 units potentially affected
The defect: CERTAIN HEAVY DUTY TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 104, "WINDSHIELD WIPING AND WASHING SYSTEMS." DUE TO THE DESIGN OF THE WINDSHIELD WASHER PUMP MOTOR CIRCUIT, THE SYSTEM'S ABILITY TO FUNCTION IS IMPAIRED WHEN IT IS FULL OF FROZEN WATER AND THE PUMP MOTOR SHAFT IS LOCKED OR FROZEN (CANNOT ROTATE).
The risk: ANY RESULTANT REDUCED VISIBILITY COULD CAUSE A CRASH.
The remedy: DEALERS WILL INSTALL A NEW 10 AMP FUSE IN PLACE OF THE 5 AMP FUSE AND A NEW 10 AMP LABEL WILL BE PLACED OVER THE ORIGINAL 5 AMP DESIGNATION ON THE FUSE PANEL LABEL. OWNER NOTIFICATION BEGAN ON JUNE 27, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 01516View on NHTSA.gov
03V062000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC

Feb 25, 2003
35,074 units potentially affected
The defect: ON CERTAIN SCHOOL AND TRANSIT BUSES BUILT WITH BOSCH ZERO OFFSET PIN SLIDE (ZOPS) HYDRAULIC DISC BRAKES, THE ZOPS HYDRAULIC DISC BRAKES MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION, WHICH CAN RESULT IN EXCESSIVE OR ABNORMAL HEAT GENERATION AT ONE OR MORE OF THE BRAKES.
The risk: THE COMBINATION OF THE FOLLOWING FACTORS MAY COLLECTIVELY RESULT IN AN UNREASONABLE RISK TO MOTOR VEHICLE SAFETY: POTENTIAL FIRE AT A WHEEL END, HIGH INCIDENT RATES OF STUCK CALIPERS, AND EVACUATION AND CONTAINMENT CONCERNS RELATING TO MULTIPLE PASSENGERS.
The remedy: INTERNATIONAL WILL NOTIFY ITS CUSTOMERS AND REPAIR THE BUSES FREE OF CHARGE. THE RECALL BEGAN OCTOBER 29, 2004.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 03502/04501View on NHTSA.gov
02V260000

PARKING BRAKE:CONVENTIONAL

Sep 20, 2002
11,204 units potentially affected
The defect: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS BUILT WITH DRIVELINE PARKING BRAKE CODES 04GAR, THE PARKING BRAKE ASSEMBLY MAY NOT HOLD THE VEHICLE IN POSITION WHEN SET. FACTORS CONTRIBUTING TO THIS POSSIBILITY ARE AS FOLLOWS: (1) CRACKED OR BROKEN CAMS; (2) LOOSE OR BROKEN ANCHOR BOLTS; (3) INITIAL SHOE DIAMETER NOT SET PROPERLY DURING ASSEMBLY, WHICH CAN LEAD TO PROGRESSIVE COMPONENT DAMAGE; (4) BENT ADJUSTER LEVERS THAT CANNOT FUNCTION; OR (5) AUTOMATIC ADJUSTER CABLES THAT ARE DISCONNECTED.
The risk: IF THE PARKING BRAKE DOES NOT FUNCTION PROPERLY, THE VEHICLE COULD ROLL, WITHOUT WARNING, AFTER THE PARKING BRAKE LEVER HAS BEEN SET, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REPLACE THE CAM, LEVER, AND BOLT. OWNER NOTIFICATION BEGAN DECEMBER 30, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02513View on NHTSA.gov
02V174000

POWER TRAIN:CLUTCH ASSEMBLY

Jul 12, 2002
13,052 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH MANUAL TRANSMISSIONS, LOWER CLUTCH RODS WITH TURNBUCKLES ARE FAILING FROM FATIGUE NEAR THE TURNBUCKLE DUE TO BENDING FORCES EXPERIENCED DURING EACH CLUTCH PEDAL CYCLE.
The risk: THE CLUTCH ROD CAN BREAK WITHOUT WARNING AND MAKE IT DIFFICULT TO SHIFT AND IF THE CLUTCH ROD BREAKS WHILE THE VEHICLE IS STOPPED OR DECELERATING, THE VEHICLE COULD LUNGE UNEXPECTEDLY IN THE DIRECTION OF THE SELECTED GEAR, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REPLACE THE CLUTCH ROD ASSEMBLY WITH A SOLID ROD DESIGN THAT DOES NOT HAVE A TURNBUCKLE. OWNER NOTIFICATION BEGAN JULY 19, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02507View on NHTSA.gov
02V095000

STEERING:LINKAGES:DRAG:LINK:CONNECTION

Mar 22, 2002
155 units potentially affected
The defect: ON CERTAIN TRUCKS, THE COTTER PIN THAT GOES THROUGH THE DRAG LINK BALL STUD AT THE CONNECTION TO THE PITMAN ARM IS MISSING. THIS PIN PREVENTS THE CASTLE NUT FROM LOOSENING.
The risk: IF THE NUT LOOSENS AND COMES COMPLETELY OFF THE DRAG LINK BALL STUD, THE DRAG LINK COULD DETACH RESULTING IN A LOSS OF STEERING CONTROL.
The remedy: DEALERS WILL INSPECT THE VEHICLE AND INSTALL A COTTER PIN IF IT IS MISSING. OWNER NOTIFICATION BEGAN APRIL 15, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02504View on NHTSA.gov
02V094000

ELECTRICAL SYSTEM:STARTER ASSEMBLY

Mar 22, 2002
338 units potentially affected
The defect: CERTAIN TRUCKS EQUIPPED WITH ENGINE STARTERS (CODE 08WWN OR 08WWP) BUILT BY LEECE-NEVILLE. THESE STARTERS HAVE A DEFECTIVE TERMINAL ADAPTER STUD. THE STUD IS USED ONLY AT THE POSITIVE BATTERY CONNECTION TO THE STARTER SOLENOID. IT WAS DESIGNED TO BE SCREWED ON OVER THE EXISTING STUD TO INCREASE THE STUD DIAMETER TO ACCOMMODATE THE LARGER SIZE OF THE POSITIVE BATTERY CABLE TERMINAL. THE ADAPTER STUD WAS WEAKENED WHEN THE HOLE WAS DRILLED TOO DEEP.
The risk: THIS COULD LEAD TO A DIRECT ELECTRICAL SHORT TO THE BATTERIES. IF THE STUD BREAKS OFF, THE POSITIVE BATTERY CABLE COULD SHORT DIRECTLY TO GROUND, WHICH CAN GENERATE HEAT AND SPARKS CAUSING A FIRE.
The remedy: DEALERS WILL REPLACE THE ADAPTER STUD. OWNER NOTIFICATION BEGAN APRIL 15, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02503View on NHTSA.gov
02V054000

SUSPENSION:REAR

Feb 15, 2002
1,442 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH IROS REAR AIR SUSPENSIONS, DURING ASSEMBLY, FOUR BOLTS AND NUTS HOLDING THE MAIN SUPPORT MEMBER BUSHING BAR PINS TO THE MAIN SUPPORT MEMBER HANGERS WERE INCORRECTLY TIGHTENED.
The risk: THE NUTS COULD WORK LOOSE OR FALL OFF ALLOWING THE BOLTS TO FATIGUE AND FAIL THE CONNECTION BETWEEN A MAIN SUPPORT MEMBER BUSHING AND FRAME HANGER. SEPARATION OF THE MAIN SUPPORT MEMBER ASSEMBLY FROM THE FRAME MOUNTED HANGER BRACKET COULD RESULT INCREASING THE RISK OF SUDDEN LOSS OF CONTROL OF THE VEHICLE.
The remedy: DEALERS WILL INSTALL FOUR NEW NUTS AND BOLTS AND TIGHTEN TO SPECIFICATION. OWNER NOTIFICATION BEGAN MARCH 15, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02501View on NHTSA.gov
01V353000

STEERING

Nov 15, 2001
558 units potentially affected
The defect: VEHICLE DESCRIPTION: TRUCKS. AN INCORRECT GRADE 5 FLANGE-NUT WAS INSTALLED IN PLACE OF A GRADE 8 NUT AND FLAT WASHER ON THE YOKE PINCH BOLT THAT HOLDS THE CONNECTION BETWEEN THE LOWER END OF THE I-SHAFT AND THE STEERING GEAR.
The risk: IF THE PINCH BOLT NUT EXPERIENCES THREAD STRIPPING, THE YOKE CONNECTION OF THE STEERING SHAFT TO THE STEERING GEAR BOX COULD FAIL AND POSSIBLY RESULT IN LOSS OF STEERING CONTROL.
The remedy: DEALERS WILL REPLACE THE GRADE 5 PINCH BOLT NUT WITH THE CORRECT GRADE 8 NUT AND WASHER ON ALL VEHICLES. OWNER NOTIFICATION BEGAN DECEMBER 17, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 01515View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA02034ClosedEngineering Analysis

OVERHEATING FRONT AND REAR BRAKES

Opened Dec 3, 2002
Closed Feb 10, 2004

THIS INVESTIGATION FOCUSED ON INTERNATIONAL MEDIUM DUTY TRUCKSAND SCHOOL BUS CHASSIS WEIGHING UP TO 33,000 POUNDS, EQUIPPED WITH HYDRAULIC BRAKES AND BUILT WITH THE BOSCH ZERO OFFSET PIN SLIDE (ZOPS)BRAKE SYSTEM CALIPERS.INTERNATIONAL USED THE ZOPS CALIPERS FROM APRIL 1997 THROUGH JUNE 2002.ODI WAS CONCERNED ABOUT REPORTS OF THE BRAKE CALIPERS STICKING IN THE APPLIED POSITION, RESULTING IN EXCESSIVE HEAT.AS THE INVESTIGATION PROGRESSED, ODI BECAME AWARE OF WHEEL END FIRES, SOME OF WHICH OCCURRED ON SCHOOL BUSES.DURING THE INVESTIGATION ODI OBTAINED WARRANTY DATA WHICH WAS SORTED AND ANALYZED BY VRTC TEST ENGINEERS AND ODI TO GAIN AN UNDERSTANDING OF THE MAGNITUDE OF THE PROBLEM.AFTER A THOROUGH WARRANTY DATA ANALYSIS, RELATED TESTING AND DOCUMENT REVIEWS, ODI MET WITH INTERNATIONAL, SHARED THE DATA ANALYSIS AND SHORTLY AFTERWARDS, INTERNATIONAL AGREED TO A SAFETY RECALL.FURTHER DETAILS ARE INCLUDED ON PAGES 2 - 4.

SERVICE BRAKES, HYDRAULICLed to recall 03V062000

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .