POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE)
2006 Jeep Wrangler Recalls
Safety recall campaigns filed with NHTSA that cover this model year
Data refreshed
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecall campaigns
3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is
POWER TRAIN:CLUTCH ASSEMBLY
POWER TRAIN:AUTOMATIC TRANSMISSION
What a recall is
- Safety recall
- A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
- Safety investigation
- NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
- Manufacturer communication
- Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.
CLUTCH LINKAGE FAILURE
ON MAY 2, 2006 DAIMLERCHRYSLER CORPORATION (DCC) SUBMITTED TO THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION (NHTSA) A PART 573 REPORT ADVISING THAT CERTAIN MODEL YEAR 2006 JEEP WRANGLER VEHICLES WOULD BE VOLUNTARILY REC ALLED TO REPLACE A DEFECTIVE CLUTCH LINKAGE COMPONENT.THE RECALL ACTION IS IDENTIFIED BY NHTSA NO. 06V147 (DCC NO. F22).THE LINKAGE ROD BETWEEN THE CLUTCH PEDAL AND CLUTCH MASTER CYLINDER CAN BREAK WHEN THE CLUTCH PEDAL IS DEPRESSED; LINKAGE ROD FAILURE UNDER THESE CONDITIONS RESULTS IN IMMEDIATE ENGAGEMENT OF THE CLUTCH AND RENDERS THE CLUTCH PEDAL INEFFECTIVE THEREAFTER .THE 6,876 MANUAL TRANSMISSION VEHICLES INCLUDED IN THE RECALL ACTION WERE ALL MANUFACTURED BETWEEN 11/3/2005 AND 2/13/2006.DCC WILL REPLACE THE DEFECTIVE LINKAGE WITH A COMPONENT OF A PREVIOUS DESIGN LEVEL WHICH HAS NOT EXPERIENCED FIELD FAILURE.THE TIMING OF DCC'S ACTION HAS NOT BEEN DETERMINED.ACCORDINGLY, THIS PRELIMINARY EVALUATION IS CLOSED.
Elsewhere on this vehicle
Data sources
- NHTSA Office of Defects Investigation — recall campaigns and safety investigations
Data on this page last refreshed .