RoadVitals

2006 Jeep Wrangler

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
730
Latest Dec 7, 2025
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Apr 15, 2015
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
14
24 injuries, 0 deaths reported

Overview

Our database contains 730 NHTSA owner-reported complaints for the 2006 Jeep Wrangler, most frequently naming the fuel system, steering and suspension categories. 3 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 31 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
15V222000

POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE)

Apr 15, 2015
43,939 units potentially affected
The defect: Chrysler (FCA US LLC) is recalling certain model year 2006 Dodge Viper and Jeep Wrangler and Liberty vehicles manufactured July 1, 2005, to July 31, 2006. In the affected vehicles, the springs within the clutch pedal position switch that prevents the vehicle from starting unless the clutch pedal is pushed down may break. As a result, the vehicle may not be started when the clutch pedal is pushed down or the engine may crank and start without the clutch pedal being pushed down causing the vehicle to unexpectedly lurch.
The risk: If the vehicle unexpectedly moves there is an increased risk of a crash.
The remedy: Chrysler will notify owners, and dealers will replace the clutch ignition interlock switch, free of charge. The recall began on August 31, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R13.
Chrysler (FCA US LLC)Manufacturer number R13View on NHTSA.gov
06V147000

POWER TRAIN:CLUTCH ASSEMBLY

May 3, 2006
6,876 units potentially affected
The defect: ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 6 SPEED MANUAL TRANSMISSIONS, THE HYDRAULIC CLUTCH MASTER CYLINDER LINKAGE ROD MAY BREAK. THIS MAY NOT ALLOW DISENGAGEMENT OF THE CLUTCH WHEN THE PEDAL IS DEPRESSED.
The risk: UNINTENTIONAL VEHICLE MOVEMENT, INCREASED STOPPING DISTANCE, AND ENGINE STALLING COULD OCCUR WHICH COULD RESULT IN A CRASH.
The remedy: DEALERS WILL REPLACE THE CLUTCH MASTER CYLINDER LINKAGE ROD FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 7, 2006. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
DAIMLERCHRYSLER CORPORATIONManufacturer number F22View on NHTSA.gov
05V460000

POWER TRAIN:AUTOMATIC TRANSMISSION

Oct 6, 2005
256,409 units potentially affected
The defect: ON CERTAIN PICKUP TRUCKS, SPORT UTILITY AND PASSENGER VEHICLES EQUIPPED WITH 42RLE AUTOMATIC TRANSMISSIONS, THE CUP PLUG THAT RETAINS THE PARK PAWL ANCHOR SHAFT MAY BE IMPROPERLY INSTALLED. IF THE SHAFT MOVES OUT OF POSITION, THE VEHICLE MAY NOT BE ABLE TO ACHIEVE 'PARK' POSITION.
The risk: IF THIS OCCURS AND THE PARKING BRAKE IS NOT APPLIED, THE VEHICLE MAY ROLL AWAY AND CAUSE A CRASH WITHOUT WARNING.
The remedy: DEALERS WILL INSPECT THE TRANSMISSIONS AND INSTALL A BRACKET TO ENSURE THE PARK PAWL ANCHOR SHAFT IS RETAINED IN THE PROPER POSITION. THE RECALL BEGAN ON NOVEMBER 28, 2005. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
DAIMLERCHRYSLER CORPORATIONManufacturer number E14View on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

PE06015ClosedPreliminary Evaluation

CLUTCH LINKAGE FAILURE

Opened Apr 20, 2006
Closed Jun 13, 2006

ON MAY 2, 2006 DAIMLERCHRYSLER CORPORATION (DCC) SUBMITTED TO THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION (NHTSA) A PART 573 REPORT ADVISING THAT CERTAIN MODEL YEAR 2006 JEEP WRANGLER VEHICLES WOULD BE VOLUNTARILY REC ALLED TO REPLACE A DEFECTIVE CLUTCH LINKAGE COMPONENT.THE RECALL ACTION IS IDENTIFIED BY NHTSA NO. 06V147 (DCC NO. F22).THE LINKAGE ROD BETWEEN THE CLUTCH PEDAL AND CLUTCH MASTER CYLINDER CAN BREAK WHEN THE CLUTCH PEDAL IS DEPRESSED; LINKAGE ROD FAILURE UNDER THESE CONDITIONS RESULTS IN IMMEDIATE ENGAGEMENT OF THE CLUTCH AND RENDERS THE CLUTCH PEDAL INEFFECTIVE THEREAFTER .THE 6,876 MANUAL TRANSMISSION VEHICLES INCLUDED IN THE RECALL ACTION WERE ALL MANUFACTURED BETWEEN 11/3/2005 AND 2/13/2006.DCC WILL REPLACE THE DEFECTIVE LINKAGE WITH A COMPONENT OF A PREVIOUS DESIGN LEVEL WHICH HAS NOT EXPERIENCED FIELD FAILURE.THE TIMING OF DCC'S ACTION HAS NOT BEEN DETERMINED.ACCORDINGLY, THIS PRELIMINARY EVALUATION IS CLOSED.

POWER TRAIN:CLUTCH ASSEMBLYLed to recall 06V147000

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

View all 730
Airbags
Filed Dec 7, 2025

Unrecalled, unreplaced TAKATA air bags. This particular Jeep has been operated in high temperature/high humidity conditions and which was known to the manufacturers to cause potentially fatal injuries to the driver and front seat passenger. The truck was built by Daimler Chrysler (2006), and neither they, nor the successor companies Fiat/Chrysler and Stellantis have made no efforts whatsoever to contact the owners (I am the original owner from day 1) to effect repair or replacement of the defective air bags and initiator units. The unit was extensively operated in the Paris , Texas area for 2-1/2 years in extremely high humidity/hot temperatures in normal service. They should be considered compromised by your own tests done in the 2006-2012 period.

NHTSA ID
11703575
Incident
Jan 31, 2008
Engine
Filed Dec 7, 2025

The ECU/PCU has developed a failure to control the idle air intake valve due to an unrepairable defect on the computer. IT can shut the engine down without warning while running, especially when approaching stops. IT requires the operator to try to control the issue using the accelerator pedal to override it and prevent the engine from cutting out. It can happen without warning, and de[pending on the skill level of the driver, an accident can easily result. PLUS there are NO repair parts for the ECU/PCU in the parts system, resulting in an unsafe and unmaintainable vehicle on the highways. The ECU /PCU was used one year only, so the Chrysler engineers knew they had a defect. No older Jeep used this particular unit and no younger ones used it either!

NHTSA ID
11703574
Incident
Nov 11, 2025
Body & structure
Filed Jun 23, 2023

The frame of this vehicle has deteriorated to the point of becoming a safety hazard. The frame has rusted through over 50% of the thickness (internally) and has broken through to the outside in several areas around where the suspension and transmission attach. I recognize that this is an older vehicle, but it has larger percentage of rust than other vehicles I have owned and I do not believe it should be this deteriorated. I believe there must have been a manufacturing defect in the design (water/dirt) can get trapped in the frame or the material used was of insufficient corrosion resistance. Component Malfunction: Frame Structural Integrity Safety Risk: Drivetrain/Suspension could detach from vehicle causing safety risk to occupant of vehicle or nearby pedestrians/vehicles/structures. Inspected by dealership: Dealership did not mention it, probably because this is a 'known' issue that they don't have a fix for. (Frame replacement is expensive) Inspected by police: Indiana does not require inspections. (No) Warning Lamps: No. Symptoms appeared in 2020, seem to have accelerated over the last two years/5000 miles.

NHTSA ID
11528445
Incident
Jun 22, 2023
Powertrain (other)
Filed Feb 12, 2023

The transmission has been shifting very hard and erratic for years and if i hit a bump the steering wheel shakes violently. Has been doing these things since almost new the dealer would not fix any of it.

NHTSA ID
11506817
Incident
Feb 12, 2023
Airbags
Filed Dec 19, 2022

December 19th, 2022 Gentlemen/Ladies: This vehicle has been operated over five (5) of its sixteen (16) years in East and West Texas, in an extremely high heat and high humidity environment. It has been also in Central Illinois for about 9 years in a similar environment, and it is known to have the Takata air bag initiator units that are prone to an over 50% dangerous explosion failure rate when actuated. Given that this vehicle is soon to be exported to an equally high heat and humidity environment in service, may I ask why haven't you required Chrysler/Jeep to recall and repair the units in question? Given that there are no doubt several million Jeep Wranglers and Wrangler Unlimiteds with these Takata units in them, it is an unconscionable mistake to allow them to continue in daily service in an unrepaired or updated condition. When, not if these units fail, the results can result in serious injuries and deaths.

NHTSA ID
11498135
Incident
Dec 19, 2022
Fuel system
Filed Jun 27, 2021

Vehicle’s inlet check valve for gas tank does not work properly when tank is filled at fueling stations. Does not trigger gas pumps to stop causing overflow and spilling on person / clothing / vehicle and gas station property. This is a known issue for 2005-2006 Jeep Wranglers. The issue was repaired by manufacturer for newer Jeep Wranglers. Currently no manufacturer ownership on remediation issue and/or recall for 2005-2006 model year Jeep Wranglers.

NHTSA ID
11422483
Incident
Jun 27, 2021
Fuel system
Filed Mar 6, 2021

WHEN FILLING UP THE GAS TANK WITH FUEL, THE FUEL SPLASHES OUT GOING OVER ME, MY FENDERS, SIDE OF JEEP AND THE GROUND. I BELIEVE THIS IS A MAJOR SAFETY ISSUE.AND JEEP SHOULD BE LIABLE. GOD FORBID IF THIS CAUSED A FATALITY.

NHTSA ID
11399449
Incident
Sep 15, 2000
Mileage
75,000 mi
ElectricalPowertrain (other)
Filed Sep 10, 2020

THE VEHICLE WHILE OPERATING UNDER NORMAL DRIVING CONDITIONS HAD A CHECK ENGINE LIGHT APPEAR. A CERTIFIED MECHANIC FOUND THE TCM WAS FAULTY. FINDINGS: P0218 HIGH TEMP OPERATION ACTIVATED. P0714 TRANSMISSION TEMP SENSOR INTERMITTENT. P0613 INTERNAL TCM PROBLEM. INSTRUMENT CLUSTER: 1 TCM/SINGLE BOARD ENGINE CONTROL MESSAGE NOT RECEIVED DATA LIST FOR TCM IS READING 1023 DEGREES FAHRENHEIT OR 1.10 VOLTS HAVING CODE P0613 TCM IS FAULTY.

NHTSA ID
11354298
Incident
Aug 22, 2020
Mileage
125,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

101232

POWER TRAIN

Plate - Planetary

9004009

POWER TRAIN

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

9004275

ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER

KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.

9004275

ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER

KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.

S2025000005

ELECTRICAL SYSTEM

Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes P0407 ? EGR Sensor B Circuit Low, or P0408 ? EGR Sensor B Circuit High Set

23-015-20

EQUIPMENT; STRUCTURE

Disinfectant Solution Recommended for COVID-19

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Jeep Wrangler by model year
YearComplaintsRecallsInvestigationsIssue Index
2027000—
2026820—
2025604060.8
202466611167.5
202333714265.9
202237615468.9
202190115365.6
202059912266.1
20197299259.8
20181,79914562.0
20173085370.1
20164555369.8
20154643369.3
20146514465.2
20136497461.6
201283110663.1
201148311663.7
201068511663.4
20093687459.6
20088739859.7
2007555101062.7
2006Viewing7303152.8
20056492046.6
20041923051.7
2003984052.7
20021086055.2
20011707057.2
20002515160.9
19992135156.7
19982656054.6
19974017053.4
1996210—
19952023362.9
19941514563.0
19931085563.0
1992776661.1
1991768460.6
19907971066.7
1989627970.4
1988506970.5
19873881074.2
1986111—
1985001—
1984001—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.