RoadVitals

1986 Mack Cs 200P Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Dec 14, 1987
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

87V188000

POWER TRAIN:DRIVELINE:DRIVESHAFT

Dec 14, 1987
3,620 units potentially affected
The defect: SOME OF BOLTS FASTENING REAR DRIVESHAFT ON REAR AXLE FLANGE MAY LOOSEN CAUSING DRIVESHAFT DISASSEMBLY.
The risk: DRIVESHAFT COULD BREAK AWAY WITHOUT PRIOR WARNING ANDRESULT IN A CRASH OR INJURY FROM LOOSENED DRIVESHAFT OR BOLTS.
The remedy: REPLACE BOLTS ON REAR AXLE.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov
86V068000

STEERING: STEERING WHEEL/HANDLE BAR

May 27, 1986
1,287 units potentially affected
The defect: STEERING COLUMN BOOT ATTACHED TO EXTERIOR OF FIREWALL COULD BE DEFORMED BY THE SOUND INSULATION PLACED ON THE FIREWALL AND CAUSES INTERFERENCE WITH THE STEERING SHAFT U-JOINT BOLT. CONSEQUENCE OF DEFECT: AN IMPROPERLY FITTED OR DEFORMED BOOT COULD GET CAUGHT ON BOLT WHICH RETAINS THE STEERING U-JOINT AND RESULT IN SUDDEN HARD STEERING, POSSIBLE LOSS OF CONTROL AND A POTENTIAL CRASH.
The remedy: MODIFY CAB FRONT PANEL SOUND PROOFING AND CHANGE POSITION OF STEERING COLUMN BOOT.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources