RoadVitals

2008 Mazda Mazdaspeed3

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
33
Latest Apr 13, 2018
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Jun 15, 2011
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
3
2 injuries, 0 deaths reported

Overview

Our database contains 33 NHTSA owner-reported complaints for the 2008 Mazda Mazdaspeed3, most frequently naming the powertrain (other), engine and other / unspecified categories. 1 safety recall has been issued covering this model year; and 34 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Powertrain (other)2257.9%
  • Engine513.2%
  • Other / unspecified25.3%
  • Suspension25.3%
  • Electrical25.3%
  • Transmission12.6%
  • Driver assistance12.6%
  • Fuel system12.6%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
11V329000

VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR

Jun 15, 2011
103,300 units potentially affected
The defect: MAZDA IS RECALLING CERTAIN MODEL YEAR 2008-2009 MAZDA3 AND MAZDASPEED3 VEHICLES MANUFACTURED FROM JANUARY 7, 2008, THROUGH NOVEMBER 28, 2008. THE GROUND TERMINAL OF THE WINDSHIELD WIPER MOTOR MAY HAVE BEEN INADVERTENTLY BENT DURING ASSEMBLY. IF THIS CONDITION EXISTS THEN OVER TIME THE ELECTRICAL RESISTANCE OF THE MOTOR CIRCUIT MAY INCREASE UP TO A POINT THAT THE WINDSHIELD WIPERS WOULD NOT WORK.
The risk: THE LOSS OF WIPER FUNCTION IN ADVERSE WEATHER COULD POTENTIALLY INCREASE THE RISK OF A CRASH.
The remedy: DEALERS WILL INSTALL AN ADDITIONAL GROUND HARNESS ON THE WIPER MOTOR FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JULY 15, 2011. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500.
MAZDA MOTOR CORPManufacturer number 6411FView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

View all 33
Powertrain (other)
Filed Apr 13, 2018

I WAS DRIVING ON A CITY ROAD DOING 35-40MPH IN 4TH GEAR. I LET OFF THE GAS WHILE IN 4TH AND COASTED TO ABOUT 20MPH THEN SHIFTED TO N AND STOPPED AT A RED LIGHT. WHEN THE LIGHT TURNED GREEN I TRIED TO SHIFT TO 1ST AN THE SHIFTER WENT HALF WAY IN BETWEEN R AND 1ST, SO I SHIFTED BACK TO N AND TRIED 1ST AGAIN. THEN THE WHOLE SHIFTER BROKE OFF AND WAS JUST LAYING THERE. NOW MY CAR IS STUCK IN 3RD GEAR.

NHTSA ID
11084999
Incident
Apr 12, 2018
Mileage
99,500 mi
Filed Dec 21, 2017

I WAS ON THE HIGHWAY IN MOTION WHEN ALL OF A SUDDEN MY SHIFTER BROKE OFF AND I WASN'T ABLE TO MOVE. I HAD TO CALL I TOW

NHTSA ID
11055920
Incident
Dec 20, 2017
Mileage
86,234 mi
Filed Apr 27, 2017

I BEGAN TO ACCELERATE MY MAZDASPEED 3 SHIFTING FROM 1ST GEAR TO SECOND GEAR. I SHIFTED INTO THIRD WHERE MY SHIFT BROKE AND REMAINED IN MY HAND. MY CAR STALLED OUT IN 3RD BECAUSE I COULD NOT SHIFT OUT. I TOOK OFF THE PLASTICS COVERING THE SHIFTER AND PULLED THE PLATE BACK INTO NEAUTRAL SO I COULD PUSH MY CAR TO THE LOCAL GAS STATION. MY SHIFTER ROD SNAPPED AND THE SPRING CAME OUT.

NHTSA ID
10981173
Incident
Apr 27, 2017
Powertrain (other)
Filed Jun 14, 2016

MANUAL SHIFT LEVER CAME DETACHED WHILE DRIVING IN RUSH HOUR TRAFFIC. CAR STUCK IN 4TH GEAR. I WAS UP SHIFTING WHEN IT HAPPENED.

NHTSA ID
10874127
Incident
Jun 14, 2016
Mileage
43,000 mi
Powertrain (other)
Filed Jul 25, 2015

WHILE SHIFTING FROM 2ND TO 3RD GEAR AT LOW SPEED, THE SHIFTER FOR MY MANUAL TRANSMISSION BROKE OFF IN MY HAND. AFTER COASTING TO THE SIDE OF THE ROAD AND REMOVING THE CONSOLE, I DISCOVERED IT SNAPPED IN HALF AT THE LOCATION OF THE RETENTION PIN.

NHTSA ID
10743456
Incident
Jul 24, 2015
Mileage
86,000 mi
Powertrain (other)
Filed Oct 26, 2014

AS I WAS SLOWING DOWN TO MAKE A RIGHT TURN I PLACED THE CAR IN NEUTRAL. AFTER MAKING THE TURN AND GOING TO PUT THE CAR BACK IN GEAR THE SHIFTER BREAKS AT THE POINT WHERE THE PIN GOES IN ABOVE THE BALL. I DO NOT TRACK MY CAR NOR SHIFT HARD EVER. *TR

NHTSA ID
10650101
Incident
Oct 26, 2014
Mileage
84,332 mi
Powertrain (other)
Filed Oct 5, 2014

THE SHIFT LEVER COMPLETE BROKE OFF AND NO LONGER HAD ANY AFFECT ON ENGAGING ANY OF THE GEARS. I WAS STOPPED AT A LIGHT AND IT BROKE WHEN I TRIED TO ENGAGE 1ST GEAR OUT OF NEUTRAL. LUCKILY I WAS ABLE TO FEEL FOR THE SHIFT CABLE MECHANISM THROUGH THE LEATHER SHIFTER BOOT AND ENGAGE 3RD GEAR. LIMPED HOME IN 3RD. *TR

NHTSA ID
10641487
Incident
Oct 3, 2014
Mileage
82,000 mi
Powertrain (other)
Filed Sep 26, 2014

I HAVE A 2008 MAZDASPEED 3 WITH A MANUAL TRANSMISSION. WHILE I WAS DRIVING TO WORK ON 9/9/2014, THE STEEL ROD THAT THE SHIFTER KNOB IS ATTACHED TO SHEARED OFF SUDDENLY WHILE I WAS SHIFTING FROM FIRST TO SECOND. THIS LEFT THE TRANSMISSION IN NEUTRAL AND I HAD NO POWER SINCE I COULDN'T SHIFT INTO GEAR. THIS WAS A VERY DANGEROUS SITUATION SINCE I WAS TRAVELING THROUGH AN INTERSECTION IN HEAVY TRAFFIC. LUCKILY, I AVOIDED AN ACCIDENT AND COASTED TO A STOP. THE CAR HAD TO BE TOWED HOME. THE STEEL SHAFT SEPARATED COMPLETELY IN TWO WITHOUT ANY WARNING. THE BREAK OCCURRED RIGHT WHERE THE SHAFT HAS A HOLE DRILLED THROUGH IT FOR THE METAL PIN THAT LOCKS IT INTO THE LOWER PART OF THE SHIFTER ASSEMBLY. I HAVE SAVED THE BROKEN PART AND I ALSO TOOK PHOTOS OF IT AT THE TIME OF THE INCIDENT. I'M VERY CONCERNED THAT THIS PART, WHICH IS CRITICAL TO THE SAFE OPERATION OF THE VEHICLE FAILED WITHOUT WARNING WHILE I WAS DRIVING. THIS APPEARS TO BE A SERIOUS DESIGN OR MANUFACTURING DEFECT. THERE ARE OTHER REPORTS OF SIMILAR SHIFTER FAILURES FOR THIS YEAR/MODEL CAR ON INTERNET FORUMS. I REPORTED THIS PROBLEM TO A MAZDA CUSTOMER SERVICE REPRESENTATIVE VIA MAZDA'S CUSTOMER EXPERIENCE HOTLINE ON 9/9. I EMAILED THEM A DESCRIPTION OF THE PROBLEM AND SENT PHOTOS OF THE PART. I ALSO SHOWED THE PART TO MY LOCAL MAZDA DEALERSHIP, LEE JOHNSON MAZDA IN KIRKLAND, WA AND THEY CONFIRMED THAT THE PART SHOULD NOT HAVE FAILED IN THIS FASHION. I HAVE MADE REPEATED FOLLOW UP CALLS TO THE MAZDA CUSTOMER EXPERIENCE HOTLINE AND ON 9/26 THEY HAVE INFORMED ME THAT MAZDA WILL NOT INVESTIGATE THE ISSUE AND IS NOT INTERESTED IN EXAMINING THE FAILED PART. THE CASE FILE NUMBER THEY GAVE ME IS [XXX]. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

NHTSA ID
10639364
Incident
Sep 9, 2014
Mileage
42,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

09-038-24

ELECTRICAL SYSTEM

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the “Speedometer Replacement Label”. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda’s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO’s services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-016-23

ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER

Speedometer replacement procedure

09-025-21-3824

EQUIPMENT

This service bulletin provides information regarding the proper use of the driver’s floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage.

01-006-21-3779

ELECTRICAL SYSTEM

This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.

01-005-21-3778

ELECTRICAL SYSTEM

The Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.

07-001-21-3775

EQUIPMENT

A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. “Mazda Air Cooling Coil Coating” is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mazda Mazdaspeed3 by model year
YearComplaintsRecallsInvestigationsIssue Index
2015000—
2014000—
2013310—
2012610—
2011520—
2010322042.3
2009410—
2008Viewing331041.9
2007382145.0

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.