RoadVitals

2011 Mazda Mazdaspeed3

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
5
Latest Mar 29, 2018
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Feb 9, 2017
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 5 NHTSA owner-reported complaints for the 2011 Mazda Mazdaspeed3, most frequently naming the body & structure, exterior lighting and electrical categories. 2 safety recalls have been issued covering this model year; and 26 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Body & structure225.0%
  • Exterior lighting225.0%
  • Electrical112.5%
  • Other / unspecified112.5%
  • Steering112.5%
  • Tires & wheels112.5%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
17V082000

SEATS

Feb 9, 2017
173,859 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.
The risk: If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
The remedy: Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.
Mazda North American OperationsManufacturer number 0917BView on NHTSA.gov
16V644000

STRUCTURE:BODY:HATCHBACK/LIFTGATE

Sep 6, 2016
580,455 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
The risk: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
The remedy: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Mazda North American OperationsManufacturer number 9916HView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

ElectricalExterior lighting
Filed Mar 29, 2018

THE PASSENGER HEADLIGHT HAS ACCUMULATED A LOT OF MOISTURE (1/2 CUP OR MORE) WHICH RESULTED IN THE HEADLIGHT MALFUNCTIONING WHILE DRIVING. THIS IS EXTREMELY DANGEROUS, ESPECIALLY HAD THIS HAPPENED AT NIGHT. THE DEALERSHIP ACKNOWLEDGE ITS A COMMON PROBLEM, SAID IT WAS A SEAL PROBLEM THAT BURNED OUT THE BALLAST, BUT THAT IT WASN'T COVERED BY A WARRANTY OR RECALL. THIS IS A VERY COMMON PROBLEM (GOOGLE MAZDA 3 HEADLIGHT MOISTURE AND THERE ARE HUNDREDS OF EXAMPLES) AND NEEDS TO BE RECALLED/FIXED. THE DEALERSHIP WILL QUOTE OVER $1000 TO REPAIR THIS PROBLEM. VEHICLE WAS IN MOTION IN CITY DRIVING. ADDITIONALLY IN A MEMO THEY ACKNOWLEDGE HEAVY AMOUNTS OF WATER SHOULD BE REPLACED BUT BECAUSE ITS NOT A RECALL ANYTHING OVER 3 YEARS WILL NOT BE WARRANTIED (SEE ATTACHED). LASTLY YOU CAN SEE THAT THE HEADLIGHT BULB SEAL HAS AN ACCUMULATED RUST LINE ABOUT HALF WAY UP FROM STANDING WATER IN THE LIGHT THAT RUSTED OUT AND EVENTUALLY BURNED OUT THE BALLAST (ATTACHED).

NHTSA ID
11081983
Incident
Feb 6, 2018
Mileage
65,000 mi
Body & structureExterior lighting
Filed Aug 21, 2017

EXCESSIVE ABNORMAL AMOUNT OF MOISTURE/WATER GETTING IN HEADLIGHT (PASSENGERS SIDE) CAUSING HEADLIGHT NOT TO WORK. PROBLEM FIRST BEGAN 7/1/2016. WATER GETTING INTO HEADLIGHT AND EFFECTING THE AFS SENSOR ALSO. AFS SENSOR NOT WORKING NOW. AFS SENSOR QUIT WORKING ON OR ABOUT 6/1/2017. HEADLIGHT QUIT WORKING 2/1/2017. NON WORKING HEADLIGHT AND NON WORKING AFS SENSOR IS CAUSING PROBLEMS WITH VISIBILITY AT NIGHT.

NHTSA ID
11018646
Incident
Jul 1, 2016
Steering
Filed Aug 15, 2016

TL* THE CONTACT OWNS A 2011 MAZDA M3S. WHILE DRIVING 30 MPH, THE POWER STEERING WARNING LIGHT ILLUMINATED AND THE STEERING WHEEL BECAME DIFFICULT TO MANEUVER. THE FAILURE RECURRED INTERMITTENTLY. THE VEHICLE WAS TAKEN TO THE DEALER WHERE IT WAS DIAGNOSED THAT THE ELECTRIC POWER STEERING PUMP FAILED AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 15,000. ...UPDATED 09/12/16 *BF *TR

NHTSA ID
10896029
Incident
Feb 1, 2014
Mileage
15,000 mi
Other / unspecifiedTires & wheels
Filed Mar 7, 2015

2011 MAZDA 3 REAR TIRE WEAR ISSUES: CAR HAS UNEVEN TIRE WEAR, (INSIDE EDGES) EVEN WHEN TIRES GET ROTATED, CAR IS ALSO ALIGNED CORRECTLY, NO FRONT END ISSUES. AFTER NORMAL DRIVING, THE TIRES GET A BAD FEATHERING WEAR ISSUE, CREATING UNEVEN (INSIDE EDGE) WEAR AND PREMATURE TIRE USAGE. THIS SHOULD BE REVIEWED AND RECALLED OR CLASS ACTION LAWSUIT SHOULD OCCUR. IT'S A MANUFACTURE DEFECT IN ENGINEERING, AND VERY COMMON, COSTING OWNERS THOUSAND OF DOLLARS OVER OWNERSHIP LIFE. *TR

NHTSA ID
10692764
Incident
Feb 3, 2015
Mileage
61,222 mi
Body & structure
Filed Oct 24, 2014

THE FRONT DASH SEPARATES AND THE MANUFACTURE WON'T STAND BY IT. *TR

NHTSA ID
10649833
Incident
Oct 23, 2013
Mileage
20,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

09-038-24

ELECTRICAL SYSTEM

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the “Speedometer Replacement Label”. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda’s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO’s services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-016-23

ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER

Speedometer replacement procedure

09-025-21-3824

EQUIPMENT

This service bulletin provides information regarding the proper use of the driver’s floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage.

01-006-21-3779

ELECTRICAL SYSTEM

This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.

01-005-21-3778

ELECTRICAL SYSTEM

The Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.

07-001-21-3775

EQUIPMENT

A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. “Mazda Air Cooling Coil Coating” is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mazda Mazdaspeed3 by model year
YearComplaintsRecallsInvestigationsIssue Index
2015000—
2014000—
2013310—
2012610—
2011Viewing520—
2010322042.3
2009410—
2008331041.9
2007382145.0

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.