SUSPENSION:FRONT:SPRINGS:COIL SPRINGS
1995 Mazda MX3
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 10 NHTSA owner-reported complaints for the 1995 Mazda MX3, most frequently naming the airbags, suspension and body & structure categories. 1 safety recall has been issued covering this model year; 1 NHTSA investigation names it; and 27 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
View as table
| Month | Complaints filed | Cumulative |
|---|---|---|
| Dec 1995 | 1 | 1 |
| Jan 1996 | 2 | 3 |
| Sep 1996 | 1 | 4 |
| Dec 1996 | 3 | 7 |
| Aug 1997 | 1 | 8 |
| Jul 1998 | 1 | 9 |
| Jun 2007 | 1 | 10 |
What owners report
Complaints grouped by the component NHTSA recorded
- Airbags541.7%
- Suspension325.0%
- Body & structure18.3%
- Brakes18.3%
- Heating & air conditioning18.3%
- Electrical18.3%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govSafety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
TL*THE CONTACT OWNS A 1995 MAZDA MX-3. WHILE DRIVING 35 MPH, THE CONTACT HEARD A LOUD CLUNKING NOISE COMING FROM THE FRONT OF THE VEHICLE. HE REMOVED THE PASSENGER SIDE FRONT TIRE AND NOTICED THAT THE COIL SPRING HAD FAILED. HIS VIN IS NOT INCLUDED IN RECALL # 97V116000 (SUSPENSION:FRONT:SPRINGS:COIL SPRINGS). THE CONTACT FEELS THAT IT SHOULD BE INCLUDED BECAUSE HE IS EXPERIENCING THE SAME FAILURE AS NOTED IN THE RECALL. THE CURRENT MILEAGE IS 145,222 AND FAILURE MILEAGE WAS 130,000.
- NHTSA ID
- 10194745
- Incident
- Jun 1, 2006
- Mileage
- 130,000 mi
CONSUMER HAVE BEEN CONTINUALLY EXPRIENCING SUSPENSION PROBLEMS. REPLACED TIRE EVERY 3000 MILES. DEALER NOTIFIED, BUT MANUFACTURER REFUSED TO ALLOW DEALER TO CORRECT THE PROBLEM FOR UNKNOWN REASON. *AK
- NHTSA ID
- 825510
- Incident
- Jan 25, 1996
BRAKES LOCK UP WHEN DRIVING IN RAIN, CAUSING LOSS OF CONTROL.
- NHTSA ID
- 521296
- Incident
- Sep 1, 1996
NO DEPLOYMENT OF AIR BAGS DURING HEAD ON COLLISION WITH UTILITY POLE.
- NHTSA ID
- 513864
- Incident
- Nov 1, 1996
AT STOP LIGHT, PROCEEDED FORWARD, TRUCK MAKING RIGHT TURN, APPLIED BRAKES, VEHICLE SLID INTO TRUCK, PASSENGER'S SIDE AIR BAG DEPLOYED, BUT DRIVER'S SIDE DID NOT; TRUCK LEFT SCENE OF ACCIDENT. *AK
- NHTSA ID
- 806329
- Incident
- Nov 19, 1996
DRIVING VEHICLE AT SPEED OF 25MPH, MAKING A RIGHT, VEHICLE WENT OUT OF CONTROL DUE FAULTY SUSPENSION, IMPACT 12:00, AND FLIPPED OVER. *AK
- NHTSA ID
- 806131
- Incident
- Nov 26, 1996
NO DEPLOYMENT OF DRIVER'S/PASSENGER'S AIR BAGD DURING A FRONTAL IMPACT. *AK
- NHTSA ID
- 801737
- Incident
- Aug 9, 1996
THE VEHICLE WAS INVOLVED IN A FRONTAL COLLISION THE PASSENGER AIRBAG DEPLOYED BUT THE DRIVERS DID NOT. PLEASE DESCRIBE. TT
- NHTSA ID
- 977705
- Incident
- Jan 11, 1996
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM
Radio Unlocking Codes.
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
EQUIPMENT; VEHICLE SPEED CONTROL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
VEHICLE SPEED CONTROL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER
Speedometer replacement procedure
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.