RoadVitals

1993 Mazda MX3

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
54
Latest Jul 10, 2020
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Oct 19, 2015
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
3
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
3
5 injuries, 0 deaths reported

Overview

Our database contains 54 NHTSA owner-reported complaints for the 1993 Mazda MX3, most frequently naming the seat belts, electrical and transmission categories. 3 safety recalls have been issued covering this model year; 3 NHTSA investigations name it; and 32 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Seat belts3048.4%
  • Electrical69.7%
  • Transmission69.7%
  • Airbags34.8%
  • Brakes34.8%
  • Driver assistance34.8%
  • Suspension34.8%
  • Visibility34.8%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
15V674000

ELECTRICAL SYSTEM:IGNITION:SWITCH

Oct 19, 2015
1,368,500 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
The risk: If the ignition switch overheats there would be an increased risk of a fire.
The remedy: Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
Mazda North American OperationsManufacturer number 8715JView on NHTSA.gov
97V211000

SEAT BELTS:FRONT:WEBBING

Nov 18, 1997
134,000 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH FRONT SEAT AUTOMATIC SHOULDER BELTS. THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY CAN BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE.
The risk: A SEAT OCCUPANT MAY NOT BE PROPERLY RESTRAINED IN THE EVENT OF A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE PASSIVE SHOULDER BELT ASSEMBLY WITH A MODIFIED ONE (WITH ADDITIONAL DUST LIP) IN VEHICLES WHICH HAVE EXPERIENCED A PROBLEM. IN VEHICLES IN WHICH THE AUTOMATIC SHOULDER BELT FUNCTIONS PROPERLY, THE RAILS WILL BE INSPECTED AND REPLACED WITH MODIFIED RAILS IF THEY EXCEED THE INSPECTION CRITERIA.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov
97V116000

SUSPENSION:FRONT:SPRINGS:COIL SPRINGS

Jul 22, 1997
25,000 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE FOLLOWING STATES: CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, NW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, WISCONSIN, AND WASHINGTON, DC. IN AREAS WHERE LARGE QUANTITIES OF ROAD SALT ARE USED, CORROSIVE PITS CAN DEVELOP ON THE SURFACE OF THE FRONT SUSPENSION COIL SPRING. REPEATED USE CAN EVENTUALLY CAUSE THE COIL SPRING TO BREAK AND A TIRE COULD BE PUNCTURED FROM CONTACT WITH THE BROKEN COIL SPRING.
The risk: THIS CONDITION INCREASES THE RISK OF A VEHICLE CRASH.
The remedy: DEALERS WILL INSTALL A GUARD ASSEMBLY WHICH WILL PREVENT THE BROKEN COIL SPRING FROM CONTACTING THE TIRE. IN ADDITION TO PERFORMING THE RECALL CAMPAIGN, MAZDA IS EXTENDING THE WARRANTY COVERAGE ON THE FRONT COIL SPRINGS FOR THE LIFT OF THE VEHICLE. IF OWNERS HAVE ALREADY PAID FOR THE REPAIR OR REPLACEMENT OF THESE FRONT COIL SPRINGS, DUE TO ROAD SALT DAMAGE, MAZDA WILL REIMBURSE THESE OWNERS FOR REASONABLE EXPENSES.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

RQ98001ClosedRecall Query

FRONT COIL SPRING FRACTURE

Opened Mar 3, 1998
Closed Nov 16, 1998

There is no summary currently available

SUSPENSION:FRONT:SPRINGS:COIL SPRINGSLed to recall 97V116000
EA94039ClosedEngineering Analysis

AUTO RESTRAINT SYSTEM FAIL

Opened Nov 30, 1994
Closed Nov 26, 1997

There is no summary currently available

SEAT BELTSLed to recall 97V211000
PE94075ClosedPreliminary Evaluation

ALTERNATOR FIRES

Opened Oct 12, 1994
Closed Dec 21, 1994

There is no summary currently available

ELECTRICAL SYSTEM

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

View all 54
Suspension
Filed Jul 10, 2020

I BOUGHT A 1993 MAZDA MX3 BASE 4 CYLINDER AND IT WAS MAKING A CLUNKING NOISE WHEN I TURN THE WHEEL WHICH WAS FOUND OUT TO BE A BROKEN COIL SPRING ON MY PASSENGER SIDE, IT IS THE FACTORY STRUT AND SPRING ASSEMBLY.

NHTSA ID
11338705
Incident
Jul 10, 2020
Mileage
225,569 mi
Seat belts
Filed May 29, 2019

DRIVERS SIDE AUTOMATIC BELT DOES NOT WORK. CAN ONLY USE LAP BELT. HAD DEALERSHIP CORRECT DURING INITIAL RECALL BUT THERE WAS NOT A PROBLEM THEN. YEARS LATER PROBLEM BEGAN AND MAZDA WILL NOT CORRECT. SEAT BELT KEEPS MOVING BACK AND FORTH IN TRACK AND WILL NOT LOCK IN PLACE. I HAVE TO REMOVE FUSE BECAUSE IT IS CONSTANT.

NHTSA ID
11210519
Incident
Jan 1, 2009
Mileage
150,000 mi
Seat belts
Filed Feb 7, 2019

TL* THE CONTACT OWNS A 1993 MAZDA MX-3. THE CONTACT STATED THAT THE SEAT BELTS FAILED TO FUNCTION PROPERLY. AN INDEPENDENT MECHANIC ORDERED THE SEAT BELT REPLACEMENT KIT AND REPLACED THE PART YEARS AGO, BUT THE SEAT BELTS FAILED TO SECURE AND RETRACT AFTER THE REPAIR. BROWNING MAZDA (18827 STUDEBAKER RD, CERRITOS, CA 90703, (562) 924-1414) INDICATED THAT THEY WOULD NOT REPLACE THE PART FOR NHTSA CAMPAIGN NUMBER: 97V211000 (SEAT BELTS) BECAUSE THE OEM SEAT BELTS HAD BEEN REPAIRED BY AN OUTSIDE SOURCE. THE DEALER INDICATED THAT THE SEAT BELT KIT WAS NO LONGER BEING MANUFACTURED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 55,000.

NHTSA ID
11175041
Incident
Mar 5, 2008
Mileage
55,000 mi
Electrical
Filed Aug 3, 2017
Fire reported

TL* THE CONTACT OWNS A 1993 MAZDA MX3. WHILE DRIVING APPROXIMATELY 30 MPH, THE CONTACT NOTICED SMOKE COMING FROM THE STEERING COLUMN. THE CONTACT COASTED THE VEHICLE OVER TO THE SIDE OF THE ROAD AND THE BATTERY CAUGHT ON FIRE. THE FIRE DEPARTMENT EXTINGUISHED THE FIRE. A FIRE REPORT WAS NOT FILED. THE CONTACT CALLED NORTH KANSAS CITY MAZDA (LOCATED IN NORTH KANSAS CITY, MO) WHO STATED THAT THEY WOULD RETRIEVE THE VEHICLE. THE CONTACT STATED THAT THE VEHICLE WAS NEVER PICKED UP. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 15V674000 (ELECTRICAL SYSTEM). THE PART NEEDED FOR THE REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS NOT CONTACTED. THE APPROXIMATE FAILURE MILEAGE WAS 175,000. PARTS DISTRIBUTION DISCONNECT.

NHTSA ID
11012643
Incident
Mar 22, 2016
Mileage
175,000 mi
Electrical
Filed Feb 26, 2016

TL* THE CONTACT OWNS A 1993 MAZDA MX3. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 15V674000 (ELECTRICAL SYSTEM). THE PART TO DO THE REPAIR WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE.

NHTSA ID
10838633
Incident
Dec 15, 2015
Seat belts
Filed May 4, 2011

TL*THE CONTACT OWNS A 1993 MAZDA MX3. THE CONTACT STATED THAT THE DRIVERS SIDE MOTOR FOR THE SEAT BELT FAILED AND LOCKED WHEN SHE OPENED THE DOOR. THE VEHICLE WAS NOT INSPECTED BY A DEALER; NOR WAS IT REPAIRED. THE MANUFACTURER WAS CONTACTED AND OFFERED NO ASSISTANCE. THE FAILURE MILEAGE WAS APPROXIMATELY 99,000.

NHTSA ID
10399092
Incident
Feb 5, 2008
Mileage
99,000 mi
Seat belts
Filed Apr 29, 2011

TL* THE CONTACT OWNS A 1993 MAZDA MX3. THE CONTACT STATED THAT THE AUTOMATIC SEAT BELT WAS JAMMED AND WOULD NOT LATCH. IN ADDITION, THE SHOULDER STRAP WOULD NOT COME RESTRAIN OVER THE SHOULDER. THE CONTACT BELIEVED THE FAILURE TO BE A SEVERE SAFETY ISSUE BECAUSE ONLY THE LAP BELT WAS OPERABLE. THE FAILURE MILEAGE WAS 93,000 AND THE CURRENT MILEAGE WAS UNKNOWN. UPDATED 06/01/11*LJ UPDATED 06/10/11

NHTSA ID
10398272
Incident
Apr 26, 2008
Mileage
93,000 mi
Seat belts
Filed Nov 17, 2010

TL*THE CONTACT OWNS A 1993 MAZDA MX3. WHILE DRIVING APPROXIMATELY 55-65 MPH, THE DRIVER SIDE SEAT BELT BECAME STUCK IN THE BACK POSITION AND WOULD NOT MOVE FORWARD. THE CONTACT PRESSED THE EMERGENCY RELEASE BUTTON TO GET OUT OF THE SEAT BELT. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER WHERE THE CONTACT WAS INFORMED OF RECALL 97V211000 (SEAT BELTS: FRONT: WEBBING). THE CONTACT WAS TOLD BY THE DEALER THAT HE HAD TO HAVE THE DOOR LATCH SWITCH REPAIRED BEFORE THE RECALL REPAIR COULD BE PERFORMED. HE WAS ALSO TOLD THAT THE WIRING NEEDED TO BE INSPECTED BUT HE WOULD BE CHARGED FOR IT. THE FAILURE MILEAGE WAS APPROXIMATELY 145,000 AND THE CURRENT MILEAGE WAS APPROXIMATELY 149,000.

NHTSA ID
10366606
Incident
Mar 24, 2010
Mileage
145,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

MT-002-22

ELECTRICAL SYSTEM

Radio Unlocking Codes.

09-009-19-3566

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-034-18-3430a

EQUIPMENT; VEHICLE SPEED CONTROL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-034-18-3430

VEHICLE SPEED CONTROL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-035-17-3080

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

0900716

ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER

Speedometer replacement procedure

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mazda MX3 by model year
YearComplaintsRecallsInvestigationsIssue Index
1999100—
1998000—
1997000—
1996200—
1995101156.7
1994191361.2
1993Viewing543358.8
1992453355.0
1991101—
1990001—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.