RoadVitals

2004 Mitsubishi Fuso FM657

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Sep 13, 2005
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
5
Latest Jan 11, 2018
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 1 NHTSA owner-reported complaint for the 2004 Mitsubishi Fuso FM657, most frequently naming the body & structure and heating & air conditioning categories. 5 safety recalls have been issued covering this model year; and 21 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Body & structure150.0%
  • Heating & air conditioning150.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

5 campaigns cover this model year

View all 5

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
18V047000

EQUIPMENT

Jan 11, 2018
1,153 units potentially affected
The defect: Mitsubishi Fuso Truck of America, Inc. (MFTA) is recalling certain 2004-2017 FE84D, FE85D, FEC52, FEC72, FEC92, FGB72, FK61F and FM657 trucks. These trucks are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
The risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
The remedy: MFTA will notify owners, instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on January 11, 2018. Owners may contact MFTA customer service at 1-877-711-0707, or Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. MFTA's number for this recall is MFV00001.
Mitsubishi Fuso Truck of America, Inc.Manufacturer number MFV00001View on NHTSA.gov
09E010000

EXTERIOR LIGHTING:HEADLIGHTS

Mar 30, 2009
156 units potentially affected
The defect: MITSUBISHI FUSO TRUCK OF AMERICA (MFTA) IS RECALLING 156 HALOGEN SEALED BEAM HIGH BEAM HEADLAMP ASSEMBLIES SOLD BETWEEN OCTOBER 24, 2007 AND DECEMBER 2, 2008 FOR USE AS REPLACEMENT EQUIPMENT FOR CERTAIN MITSUBISHI FUSO TRUCKS. THESE LAMPS FAIL TO CONFORM TO THE SAE STANDARDS OR RECOMMENDED PRACTICES REFERENCED IN TABLE I OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
The risk: THE PURPOSE OF THIS STANDARD IS TO REDUCE DEATHS AND INJURIES FROM MOTOR VEHICLE CRASHES BY PROVIDING ADEQUATE ILLUMINATION OF THE ROADWAY.
The remedy: MFTA WILL NOTIFY OWNERS AND REPLACE THE HEADLAMPS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 15, 2009. OWNERS MAY CONTACT MFTA AT 1-856-467-4500.
MITSUBISHI FUSO TRUCK OF AMERICA, INC.Manufacturer number C1003910View on NHTSA.gov
06V409000

PARKING BRAKE:CONVENTIONAL:AIR

Oct 26, 2006
218 units potentially affected
The defect: ON CERTAIN TRUCKS, EQUIPPED WITH A FULL AIR BRAKE SYSTEM, THERE MAY BE 3 POSSIBLE DEFECTS RELATED TO THE PARKING BRAKE CHAMBER PORTION OF THE AIR BRAKE CHAMBER ASSEMBLY. THEY ARE AS FOLLOWS: (1) DUE TO IMPROPER INSTALLATION OF THE PARKING BRAKE CHAMBER END CAP DURING ASSEMBLY, WATER MAY ENTER THE PARKING BRAKE CHAMBER, CAUSING CORROSION OF THE POWER SPRING, LEADING TO POSSIBLE SPRING FAILURE. IN THE WORST CASE, RESULTANT DAMAGE COULD CAUSE THE PARKING BRAKE TO ENGAGE WHILE THE PARKING BRAKE LEVER IS IN THE RELEASED (OFF) POSITION. (2) DUE TO IMPROPER END CAP ATTACHING SCREW DIMENSIONS, WATER MAY ENTER THE PARKING BRAKE CHAMBER, CAUSING CORROSION OF THE POWER SPRING, LEADING TO POSSIBLE SPRING FAILURE. IN THE WORST CASE, RESULTANT DAMAGE COULD CAUSE THE PARKING BRAKE TO ENGAGE WHILE THE PARKING BRAKE LEVER IS IN THE RELEASED (OFF) POSITION. (3) DUE TO IMPROPER TIGHTENING OF THE END CAP ATTACHING SCREW DURING ASSEMBLY, WATER MAY ENTER INTO THE PARKING BRAKE CHAMBER, CAUSING CORROSION OF THE POWER SPRING, LEADING TO POSSIBLE SPRING FAILURE. IN THE WORST CASE, RESULTANT DAMAGE COULD CAUSE THE PARKING BRAKE TO ENGAGE WHILE THE PARKING BRAKE LEVER IS IN THE RELEASED (OFF) POSITION.
The risk: CONTINUED OPERATION IN THIS CONDITION COULD CAUSE CORROSION OF THE POWER SPRING IN THE PARKING BRAKE CHAMBER, LEADING TO POSSIBLE SPRING FAILURE. IN THE WORST CASE, RESULTANT DAMAGE COULD CAUSE THE PARKING BRAKE TO ENGAGE WHILE THE PARKING BRAKE LEVER IS IN THE RELEASED (OFF) POSITION AND THE VEHICLE COULD CRASH WITHOUT WARNING.
The remedy: DEALERS WILL FOR ITEM (1) ABOVE, INSPECT THE PARKING BRAKE CHAMBER. THE END CAP WILL BE REPLACED WITH A MODIFIED PART. IF CORROSION IS FOUND INSIDE OF THE CHAMBER, OR ON THE POWER SPRING, THE PARKING BRAKE CHAMBER WILL BE REPLACED. FOR ITEMS 2 AND 3, THE DEALER WILL CHECK THE MANUFACTURER IDENTIFICATION MARK ON PARKING BRAKE CHAMBER. IF MGM IS STAMPED ON THE CHAMBER, IT WILL BE INSPECTED AND THEN ADHESIVE WILL BE APPLIED TO THE END CAP ATTACHING SCREW ON THESE UNITS. IF CORROSION IS FOUND INSIDE OF THE BRAKE CHAMBER OR ON THE POWER SPRING, THE PARKING BRAKE CHAMBER WILL BE REPLACED. THE RECALL BEGAN ON NOVEMBER 9, 2006. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-4500.
MITSUBISHI FUSO TRUCK OF AMERICA, INC.Manufacturer number C1001320View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Body & structureHeating & air conditioning
Filed Sep 13, 2005

I HAVE A 2003 MITSUBISHI LANCER ES, AND MY CAR IS FALLING APART WHEN YOU TOUCH IT. ALSO THE BODY, DOORS, AND PAINT BEND AND STRACH REALLY EASILY. IN THE ENGINE THE PARTS ARE NOT SITTING PROPERLY, THE BOLT TO THE BELT TENSIONER IS SITTING SIDE WAYS, THE AIR CONDITIONING AND HEATING KNOB BROKE OFF WHEN IT WAS TOUCHED, THE KNOB WAS HARD TO TURN BACK AND FORTH, THE CAR JUMPS INTO GEAR WHEN YOU PUSH THE GAS, IT ALSO HESITATES WHEN THE GAS IS PUSHED, WHEN SITTING STILL THE CAR WANTS TO DIE IN AND OUT BEFORE GOING AGAIN, IT SUCKS GAS LIKE CRAZY. *JB

NHTSA ID
10136392
Incident
Nov 12, 2003

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

DEALER LETTER

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 3rd quarterly technician quiz for 2023.

TSB-23-00-001

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This Technical Service Bulletin reviews the regulations that require a label showing the reduction in load carrying capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.

TSB-23-00-004

STRUCTURE

This Technical Service Bulletin provides instructions and material safety data sheets for removal of rap-film adhesive residue.

DEALER LETTER

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 2nd quarterly technician quiz for 2023.

TSB-21-00-010

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This Technical Service Bulletin was sent to dealers to provide instructions and Material Safety Data Sheets for Biosol 100 use.

TIN-21-00-003

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This Technical Information Notice was sent to dealers reminding them of the importance of customer satisfaction.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mitsubishi Fuso FM657 by model year
YearComplaintsRecallsInvestigationsIssue Index
2017010—
2016010—
2015010—
2014010—
2013010—
2012010—
2011010—
2010010—
2009010—
2008010—
2007020—
2006020—
2005020—
2004Viewing150—
2003040—
2002040—
2001040—
2000020—
1999030—
1998030—
1997030—
1996030—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.