RoadVitals

2007 New Flyer D40LF Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
8
Newest Mar 1, 2017
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

8 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

SUSPENSION:FRONT

Mar 1, 2017
2,357 units potentially affected
The defect: New Flyer Industries Ltd (New Flyer) is recalling certain 2006 L40LFand DE60LF transit buses, 2006-2007 C35LF, C40LFR, D35LF, D40LFR, D60LFR, DE40LF and DE40LFR transit buses, and 2005-2007 C40LF, D40LF, D60LF, DE60LFA, GE40LF, 2007 D35LFR, and DE60LFR transit buses. These vehicles are equipped with MAN V8-65L axle beams that may have cracks on the upper and/or lower surface, which, over time can cause the axle beam to fail.
The risk: Failure of the front axle beam can cause a loss of vehicle control, increasing the risk of a crash.
The remedy: New Flyer will notify owners, and dealers will inspect the axle beams and determine a repair, as necessary, free of charge. The recall began on March 10, 2017. Owners may contact New Flyer customer service at 1-204-224-6706. New Flyer's number for this recall is R17-002.
New Flyer Industries Ltd.Manufacturer number R17-002View on NHTSA.gov

STRUCTURE

Dec 17, 2012
2,048 units potentially affected
The defect: New Flyer is recalling certain model year 2004-2011 transit buses, models: C35LF, C40LFR, D35LFR, D40LF, D40LFR, D60LF, D60LFA, D60LFR, DE35LFA, DE40LF, DE40LFA, DE40LFR, DE60LF, DE60LFA, DE60LFR, and XDE40. The drive shaft access panel may have insufficient strength or be not properly secured to the floor. If the drive shaft fails, debris from the driveshaft failure may enter the passenger compartment through the panel.
The risk: If debris resulting from drive shaft failure enters the passenger compartment, it may result in injury to the bus occupants.
The remedy: New Flyer notification to owners on 01/03/2013. Dealers will install a steel plate under the access panel on affected buses, free of charge. Owners may contact New Flyer at 1-204-224-6706 for more information.
New Flyer Industries Ltd.Manufacturer number R12-040View on NHTSA.gov

POWER TRAIN:DRIVELINE:DRIVESHAFT

Aug 5, 2011
247 units potentially affected
The defect: NEW FLYER IS RECALLING CERTAIN MODEL YEAR 2005-2010 HEAVY DUTY TRANSIT BUSES. THE THREE RETAINING BOLTS FOR THE OUTPUT FLANGE ON THE ISE PROPULSION SYSTEM ARE SUBJECT TO FATIGUE FAILURE. FAILURE OF THE THREE BOLTS RETAINING THE OUTPUT FLANGE TO THE COMBINATION GEAR BOX ON THE ISE PROPULSION SYSTEM COULD RESULT IN A SEPARATION OF A PORTION OF THE DRIVESHAFT, WITH THE OUTPUT FLANGE ATTACHED, FROM THE VEHICLE.
The risk: SEPARATION OF THE DRIVESHAFT AND OUTPUT FLANGE FROM THE VEHICLE CREATES THE POTENTIAL FOR BODILY INJURY OF BYSTANDERS AND/OR PROPERTY DAMAGE.
The remedy: DEALERS WILL INSPECT THE DRIVE LINE COMPONENTS AND REPLACE THE OUTPUT FLANGE BOLTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 18, 2011. OWNERS MAY CONTACT NEW FLYER AT 1-204-934-4876.
NEW FLYER INDUSTRIES LTDManufacturer number R11-017View on NHTSA.gov

LATCHES/LOCKS/LINKAGES:DOORS:LATCH

Apr 14, 2011
1,123 units potentially affected
The defect: NEW FLYER IS RECALLING CERTAIN MODEL YEAR 2007-2011 LOW FLOOR TRANSIT BUSES PRODUCED FROM MAY 24, 2007, THROUGH MARCH 1, 2011 AND EQUIPPED WITH TEETER LEVER ASSEMBLIES. THERE IS INSUFFICIENT ENGAGEMENT BETWEEN THE TEETER LEVER BASE AND THE CAM PLATE.
The risk: FAILURE OF THE TEETER LEVER ASSEMBLY WILL CAUSE THE REAR SIDE EXIT DOOR TO OPERATE IMPROPERLY. A PASSENGER LEANING ON OR FORCED AGAINST THE DOOR COULD FALL THROUGH THE DOOR AND SUSTAIN INJURIES.
The remedy: NEW FLYER IS WORKING WITH THE MANUFACTURER OF THE TEETER LEVER ASSEMBLIES, VAPOR BUS, TO REPAIR THE AFFECTED BUSES FREE OF CHARGE. PLEASE SEE VAPOR BUS DEFECT REPORT 11E-010. THE SAFETY RECALL BEGAN ON APRIL 29, 2011. OWNERS MAY CONTACT VAPOR BUS AT 1-847-777-6450 OR NEW FLYER CUSTOMER SERVICES AT 1-204-934-4874.
NEW FLYER OF AMERICA, INC.View on NHTSA.gov

POWER TRAIN:DRIVELINE:DRIVESHAFT

Mar 9, 2010
1,845 units potentially affected
The defect: NEW FLYER IS RECALLING CERTAIN MODEL YEAR 2004-2009 TRANSIT BUSES. THESE MODELS HAVE AN INSPECTION PANEL LOCATED ABOVE THE DRIVE SHAFT IN THE PASSENGER COMPARTMENT FLOORING FOR EASY INSPECTION AND REMOVAL OF THE DRIVE SHAFT. THIS PANEL MAY NOT BE OF SUFFICIENT STRENGTH TO PREVENT FOREIGN MATTER FROM ENTERING THE PASSENGER COMPARTMENT IN THE EVENT OF A DRIVE SHAFT FAILURE.
The risk: FAILURE OF THE DRIVE SHAFT ACCESS PANEL TO MAINTAIN PASSENGER COMPARTMENT INTEGRITY COULD RESULT IN INJURY OR DEATH.
The remedy: DEALERS WILL INCORPORATE AN ENERGY ABSORBING HONEYCOMB MATERIAL TO THE UNDERSIDE OF THE ACCESS PANEL. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 10, 2010. OWNERS MAY CONTACT NEW FLYER AT 204-934-4874.
NEW FLYER INDUSTRIES LTDView on NHTSA.gov

ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR

Nov 7, 2008
1,001 units potentially affected
The defect: NEW FLYER IS RECALLING 1,001 MY 2004-2007 D40LF, MY 2005 D40LFR, AND MY 2007-2008 D60LFR TRANSIT BUSES EQUIPPED WITH CE NIEHOFF C701A OR C703A ALTERNATORS. FAILURE OF THE FORWARD ALTERNATOR BEARING MAY RESULT IN A DROP AND SEIZURE OF THE ROTATING ALTERNATOR SHAFT AND PULLEY. ONCE THE PULLEY IS STATIONARY, THE ALTERNATOR DRIVE BELT CONTINUES TO PASS OVER THE PULLEY CREATING HIGH QUANTITIES OF BELT DUST.
The risk: DUE TO THE VERY HIGH INTERNAL TEMPERATURES CREATED AT THE BEARING DURING SHAFT SEIZURE, THE BELT DUST MAY IGNITE, RESULTING IN AN ENGINE COMPARTMENT FIRE.
The remedy: TO INCREASE THE POTENTIAL LONGEVITY OF THE ALTERNATOR BEARINGS, DEALERS WILL INCORPORATE A LOWER TENSION BELT TENSIONER AND A NARROWER BELT. TO PREVENT THERMAL IGNITION IN THE EVENT OF A BEARING FAILURE, A LIGHTER DUTY, NARROWER BELT WILL SHRED RATHER THAN CONTINUE TO RUN OVER THE STATIONARY PULLEY. THE RECALL BEGAN ON NOVEMBER 17, 2008. OWNERS MAY CONTACT NEW FLYER AT 1-204-934-4803.
NEW FLYER INDUSTRIES LTDManufacturer number R08-016View on NHTSA.gov

ENGINE AND ENGINE COOLING:ENGINE

Jan 9, 2008
1,049 units potentially affected
The defect: CERTAIN BUSES HAVE STAINLESS STEEL HYDRAULIC LINES WITH 90º FLANGE FITTINGS WHICH ARE SUBJECT TO FAILURE DUE TO ERRORS IN BOTH THE DESIGN AND MANUFACTURE OF THESE LINES.
The risk: FAILURE OF THESE LINES, LOCATED IN THE ENGINE COMPARTMENT, COULD RESULT IN A VEHICLE FIRE.
The remedy: NEW FLYER WILL REMOVE THESE LINES AND REPLACE THEM WITH A PREVIOUSLY PROVEN DESIGN OF FLEXIBLE LINES. THE RECALL BEGAN ON JANUARY 15, 2008. OWNERS MAY CONTACT NEW FLYER AT 1-204-982-8400.
NEW FLYER INDUSTRIES LTDView on NHTSA.gov

SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE

Mar 13, 2007
719 units potentially affected
The defect: ON CERTAIN TRANSIT BUSES EQUIPPED WITH GRAHAM WHITE AIR DRYERS, THE AIR DRYER TIMER MODULES MAY ALLOW SUFFICIENT QUANTITIES OF MOISTURE TO ENTER AND AFFECT THE OPERATION OF THE VEHICLE AIR BRAKE SYSTEM.
The risk: FAILURE OF THE AIR BRAKE SYSTEM DUE TO MOISTURE COULD RESULT IN A CRASH.
The remedy: DEALERS WILL REPLACE THE AIR DRYER TIMER MODULE ON THE AFFECTED VEHICLES. THE RECALL BEGAN ON MARCH 22, 2007. OWNERS MAY CONTACT NEW FLYER AT 204-934-4874.
NEW FLYER INDUSTRIES LTDManufacturer number R07-004View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA09010ClosedEngineering Analysis

Air Brake System

Opened Jun 18, 2009
Closed Nov 19, 2010

INVESTIGATION HAS NOT IDENTIFIED A DEFECT.THERE HAVE BEEN NO REPORTED COMPLAINTS RELATING TO THIS ISSUE SINCE 2006. SEE CLOSING REPORT FOR FURTHER DETAILS.

SERVICE BRAKES, AIR
PE09012ClosedPreliminary Evaluation

AIR BRAKE SYSTEM

Opened Feb 27, 2009
Closed Jun 18, 2009

ODI IS CLOSING THIS PRELIMINARY EVALUATION AND OPENING AN ENGINEERING ANALYSIS (EA09-010) TO FURTHER IDENTIFY AND EVALUATE THE VEHICLE ENVIRONMENT AND BRAKE SYSTEM FACTORS THAT MAY BE CAUSING OR CONTRIBUTING TO EXTENDED STOPPING DISTANCE PERFORMANCE IN CERTAIN VEHICLES.

SERVICE BRAKES, AIR:CONTROLS

Elsewhere on this vehicle

Data sources