RoadVitals

2003 International 4300 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Aug 27, 2003
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS

Aug 27, 2003
686 units potentially affected
The defect: CERTAIN HEAVY DUTY TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE PRIMARY AND SECONDARY AIR SUPPLY HOSES FROM THE FOOT VALVE TO THE PRIMARY AND SECONDARY AIR TANKS WERE IMPROPERLY ROUTED AT THE TANK.
The risk: IF THE PRIMARY AIR CIRCUIT IS DAMAGED, THE BRAKES WILL NOT APPLY WHEN THE BRAKE PEDAL IS DEPRESSED INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSPECT AND REPAIR VEHICLES. OWNER NOTIFICATION WILL BE COMPLETED BY OCTOBER 3, 2003. OWNERS WHO TAKE THEIR VEHICLE TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 03514View on NHTSA.gov

SERVICE BRAKES, HYDRAULIC

Jan 28, 2003
146 units potentially affected
The defect: CERTAIN SCHOOL BUSES AND HEAVY DUTY TRUCKS BUILT WITH HYDRAULIC BRAKES AND AN AIR POWERED PARKING BRAKE (BRAKE CODE 04GAS) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 105, "HYDRAULIC AND ELECTRIC BRAKE SYSTEMS." THE HYDRAULIC BRAKE MONITOR MODULE WAS NOT INSTALLED ON CERTAIN VEHICLES.
The risk: WITHOUT THE BRAKE MONITOR MODULE, THE BRAKE WARNING LIGHT WILL NOT COME ON DURING THE INITIAL KEY-ON CYCLE AND WILL NOT COME ON TO WARN THE OPERATOR IF THERE IS A LOSS OF HYDRAULIC PRESSURE IN THE BRAKE SYSTEM, A LOSS OF POWER STEERING FLOW, OR IF THE EMERGENCY BRAKE BOOSTER MOTOR IS NOT FUNCTIONING.
The remedy: DEALERS WILL INSTALL THE HYDRAULIC BRAKE MONITOR MODULE. OWNER NOTIFICATION IS BEGAN DURING FEBRUARY 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 03501View on NHTSA.gov

PARKING BRAKE:CONVENTIONAL

Sep 20, 2002
11,204 units potentially affected
The defect: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS BUILT WITH DRIVELINE PARKING BRAKE CODES 04GAR, THE PARKING BRAKE ASSEMBLY MAY NOT HOLD THE VEHICLE IN POSITION WHEN SET. FACTORS CONTRIBUTING TO THIS POSSIBILITY ARE AS FOLLOWS: (1) CRACKED OR BROKEN CAMS; (2) LOOSE OR BROKEN ANCHOR BOLTS; (3) INITIAL SHOE DIAMETER NOT SET PROPERLY DURING ASSEMBLY, WHICH CAN LEAD TO PROGRESSIVE COMPONENT DAMAGE; (4) BENT ADJUSTER LEVERS THAT CANNOT FUNCTION; OR (5) AUTOMATIC ADJUSTER CABLES THAT ARE DISCONNECTED.
The risk: IF THE PARKING BRAKE DOES NOT FUNCTION PROPERLY, THE VEHICLE COULD ROLL, WITHOUT WARNING, AFTER THE PARKING BRAKE LEVER HAS BEEN SET, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REPLACE THE CAM, LEVER, AND BOLT. OWNER NOTIFICATION BEGAN DECEMBER 30, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02513View on NHTSA.gov

STEERING:LINKAGES:DRAG:LINK:CONNECTION

Mar 22, 2002
155 units potentially affected
The defect: ON CERTAIN TRUCKS, THE COTTER PIN THAT GOES THROUGH THE DRAG LINK BALL STUD AT THE CONNECTION TO THE PITMAN ARM IS MISSING. THIS PIN PREVENTS THE CASTLE NUT FROM LOOSENING.
The risk: IF THE NUT LOOSENS AND COMES COMPLETELY OFF THE DRAG LINK BALL STUD, THE DRAG LINK COULD DETACH RESULTING IN A LOSS OF STEERING CONTROL.
The remedy: DEALERS WILL INSPECT THE VEHICLE AND INSTALL A COTTER PIN IF IT IS MISSING. OWNER NOTIFICATION BEGAN APRIL 15, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02504View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE03025ClosedPreliminary Evaluation

STEERING ARM SEPARATION

Opened Jun 9, 2003
Closed Oct 7, 2003

INTERNATIONAL HAS RECEIVED NO OTHER OWNER REPORTS OF FAILURES OTHER THAN THE EVENT FORWARDED BY ODI.AFTER FURTHER REVIEW OF THE CRASH,IT WAS DETERMINED THAT THE DRIVER RAN OVER A LARGEMETAL OBJECT IN THE ROAD THAT STRUCK THE PITMAN ARM.THE IMPACT WITH THE METAL OBJECT CAUSED ASEVERVE LATERAL LOAD ON THE PITMAN ARM RETAINING BOLT, FRACTURINGIT AND ALLOWING THE PITMAN ARM TO SEPARATE FROM THESTEERING SHAFT.BASED ONINTERNATIONAL'SDATA AND FURTHER REVIEW OF THE CRASH, A SAFTEY RELATED DEFECT TREND DOES NOT EXIST AT THIS TIME AND FUTHER USE OF AGENCY RESOURCES ARE NOT CURRENTLY WARRANTED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFTEY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION ON THE VEHICLES IF WARRANTED BY THE CIRCUMSTANCES. ODI WILL CONTINUE TO MONITOR FIELD REPORTS AND TAKE APPROPRIATE ACTION IF INDICATED.

STEERING:GEAR BOX:SHAFT PITMAN

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .