Body & structure
Filed Jun 17, 2026
The contact owns a 2011 Mazda Mazda6. The contact stated that while driving at an undisclosed speed and coming to a stop, the steering wheel was not operating properly. Several days later while the contact's wife was driving at an undisclosed speed, there was play in the steering wheel. Additionally, there was an abnormal sound coming from the passenger’s side wheel. The contact stated that the wheel was turning abnormally. A mechanic arrived at the residence to diagnose the vehicle and determined that the sub frame was rusted. While touching the sub frame, pieces of the sub frame fractured. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 92,000.
- NHTSA ID
- 11744830
- Incident
- Jun 13, 2026
- Mileage
- 92,000 mi
Body & structureSuspension
Filed May 15, 2026
The contact owns a 2011 Mazda Mazda6. The contact stated that while driving at 25 MPH, the contact attempted to swerve out the way of another vehicle as she suddenly lost control of the vehicle. Due to the failure, the contact force to steer the vehicle to the left as the contact attempted to maintain control of the vehicle. The contact managed to pull over into a parking lot and called her husband for assistance. Despite the failure, the contact managed to drive the vehicle home despite the vehicle being extremely difficult to maneuver. The contact's husband managed to drive the vehicle to a local mechanic, who determined that the front subframe had failed due to excessive corrosion of the subframe. The mechanic then informed the contact of NHTSA Campaign Number: 19V323000 (Structure, Suspension); however, the contact was informed that her vehicle was not included in the recall. The manufacturer was notified of the failure where they confirmed that the vehicle was not included in the recall. The vehicle remained in the mechanic's possession and had yet to be repaired. The failure mileage was 115,000.
- NHTSA ID
- 11738066
- Incident
- Apr 17, 2026
- Mileage
- 115,000 mi
Body & structure
Filed Apr 13, 2026
Front Subframe has corroded and broke. There is a recall on the subframe that was repaired by dealership in 2019, but this repair did not fix the issue since it has now rusted through and broke. The repair was faulty.
- NHTSA ID
- 11730786
- Incident
- Mar 27, 2026
Body & structureOther / unspecified
Filed Mar 5, 2026
Car developed a known recall issue problem, Recall 2818I. Even though Nebraska was not listed as a "salt state", it's obvious that Nebraska has similar conditions to Iowa. Attempts to contact Mazda USA corporate would not even fix the issue, citing cars age and other factors even though the damage is very specific to this particular recall.
- NHTSA ID
- 11722303
- Incident
- Mar 3, 2026
Body & structureSteeringSuspension
Filed Jan 25, 2026
2011 Mazda6 A serious safety defect occurred on my vehicle and matches NHTSA Recall 19V-323 / Mazda Recall 2818I (front cross member corrosion due to insufficient coating) despite this recall not being associated with my VIN. Front cross member cracked due to rust, causing loss of steering control, wheel misalignment, and scraping from the front wheel. This is exactly the failure described in the recall (breakage of the cross member and reduced steering control, increasing the risk of a crash). My safety and the safety of others were put at risk. Although my VIN is not currently associated with the recall, all conditions of the recall apply to my vehicle: -2011 Mazda6 within the affected production range -Defect is a manufacturing issue (insufficient paint coating) -Vehicle was registered in Missouri from 2023-2025, which is a listed state The only reason this recall was not associated with my VIN is because the vehicle was not registered in Missouri at the exact time of the 2019 recall campaign. This is an administrative gap, not a safety distinction. It should not be allowed to limit a manufacturer safety defect to specific states. Vehicles move across state lines constantly. A defect that causes loss of steering control does not stop being dangerous when a car crosses a border. Registration records alone did not reflect actual vehicle use or risk. If recalls are state-limited, manufacturers and NHTSA must continue tracking registration changes and associate the recall with the VIN as soon as a vehicle becomes registered in an affected state. Rust is progressive and age-related. Since this recall began in 2019 and it is now 2026, affected vehicles are more likely to experience failure, and many are now registered in different states than they were in 2019. I am requesting that NHTSA associate Recall 19V-323 with my VIN, investigate the adequacy of state-limited recall tracking, and take action to prevent this known safety defect from causing additional crashes.
- NHTSA ID
- 11713263
- Incident
- Jan 16, 2026
Suspension
Filed Nov 21, 2025
When I took the car into my ASE mechanic shop for a normal oil change and tire rotation, they performed a general overall car inspection. They noticed that the Driver Side Rear Subframe had rusted through completely, where the coil spring is located. The passenger side was rusted, but has not yet broke through. They stated that the subframe parts should not rust through like this. They also stated that it is dangerous to drive the car in this condition. I have not notified the manufacturer as of yet, but plan to do so. There were no warning lights, but the ride did seem to be rougher than normal. The attach photos contain 2 photos of the failed driver side rear subframe and 1 photo of the good, passenger side rear subframe.
- NHTSA ID
- 11700788
- Incident
- Nov 21, 2025
Suspension
Filed Oct 26, 2025
2011 Mazda6 rear subframe rot/rust, unsafe and dangerous to drive, Same situation as the front subframe that is part of a recall.
- NHTSA ID
- 11695663
- Incident
- Oct 26, 2025
Body & structureSuspension
Filed Aug 22, 2025
The front and back cross members underneath my Mazda6 have completely rusted out. There are numerous complaints about Mazda's "Safety Recall 2818I Expansion" not covering the back support member and also not considering Nebraska to be a Salt Belt state despite the state, and specifically Omaha using salt to treat their roads in the winter. On [XXX], my front cross member completely failed due to rust, causing my vehicle to lose control. I've taken my car to the mechanic and they confirmed the front and back cross members are completely rusted and need replacement costing $7,000. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- NHTSA ID
- 11682499
- Incident
- Aug 21, 2025
Body & structureSuspension
Filed Aug 19, 2025
The contact owns a 2011 Mazda Mazda6. The contact stated that while her mother was driving at slow speeds in a parking area, there was an abnormally loud metallic sound coming from underneath the vehicle, and moments later, the vehicle became extremely difficult to maneuver. No warning lights were illuminated. The vehicle was towed to the dealer, who determined that the rear crossmember had detached from the vehicle due to excessive corrosion of the subframe. The contact was informed that the vehicle could not be repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 19V323000 (Structure, Suspension); the VIN was previously included, but was repaired in 2019. The contact stated that the recall repair was for the front passenger’s side lower control arm. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 150,000.
- NHTSA ID
- 11681707
- Incident
- Aug 19, 2025
- Mileage
- 150,000 mi
Steering
Filed Jun 12, 2025
Alignment is off. Recall for my type of call for the control arm weakening and causing wheel alignment problems. Why isn't mine part of recall??
- NHTSA ID
- 11666615
- Incident
- Jun 12, 2025
Suspension
Filed Mar 20, 2025
Front and rear subframe rust leading to gaping holes, outside of normal wear and tear.
- NHTSA ID
- 11649538
- Incident
- Mar 20, 2025
Body & structureSuspension
Filed Nov 25, 2024
The contact owns a 2011 Mazda Mazda6. The contact stated that while the vehicle was at the dealer for routine service, the vehicle was diagnosed with rust and corrosion of the sub-frame. The contact was informed that the sub-frame needed to be replaced. The vehicle was not repaired. The contact was informed of NHTSA Campaign Number: 19V323000 (Structure, Suspension); however, the VIN was not included in the recall. The manufacturer was made aware of the failure. The contact was advised to contact the NTSA Hotline to report the failure. The failure mileage was approximately 100,000.
- NHTSA ID
- 11627207
- Incident
- Nov 25, 2023
- Mileage
- 100,000 mi
Suspension
Filed Sep 30, 2024
The contact owns a 2011 Mazda Mazda6. The contact stated that while reversing, the contact heard an abnormal snapping sound coming from the rear passenger’s side of the vehicle. The vehicle was stopped and inspected, where the contact observed a big spring pushing a bar into the ground on the rear passenger’s side. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 184,000.
- NHTSA ID
- 11617312
- Incident
- Aug 22, 2024
- Mileage
- 184,000 mi
Suspension
Filed Aug 12, 2024
The rear cross member / AKA (Rear Subframe) P/N GEG1-28-80X has completely rusted out. The car is no longer safe to drive per a Pennsylvania State inspection. If driven parts of the rear suspension will drop off the car creating a hazard to other motorists and the driver of the car can lose control / mobility causing a traffic accident. Picture the entire rear suspension suddenly collapsing, that is what is going to happen. The Front subframe was subject to a recall. That recall should have included the rear as it is the same material just a few feet away, subject to the same rusting issues. These subframes were not property designed to prevent rust or even withstand a little moisture, as my car has been very well maintained. When I read the online forms this is a flaw in ALL 2009- 2013 Mazda 6's and the sister car the Ford Fusion and Mercury Milan. I have opened a case with Mazda USA case #[XXX]. They are going to inspect to confirm my mechanic diagnosis. However they are currently under no obligation to repair and replace the rusted parts but they should be as this should have been replaced when the front subframe recall was performed. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- NHTSA ID
- 11608007
- Incident
- Jul 31, 2024
Body & structureSuspension
Filed Jul 31, 2024
After getting the recall information about the front crossmember rusting out due to corrosion, I decided to check the rear crossmember on my car. WOW, the rear crossmember is SO much worse than the front one and I’ve read hundreds of similar stories about the exact same thing happening to other Mazda 6 sedans around these model years (2009-2013). The rear crossmember on my car, which supports the entire rear suspension is completely rusted thru in several spots and the lower end links aren’t even attached anymore because the brackets literally fell off and so now both back tires are leaning in at the top. It is very noticeable! Very unsafe to drive! I decided to park this car until a solution is reached with Mazda or the NHTSA on how to deal with this. I don’t know why the front crossmember was recalled but not the rear? There’s only 2 things that are rusted on my car, period…the front & rear crossmembers!
- NHTSA ID
- 11605695
- Incident
- Jul 30, 2024
Body & structureSuspension
Filed Jul 29, 2024
The contact owns a 2011 Mazda Mazda6. The contact stated that while the independent mechanic was performing an oil change on the vehicle, the independent mechanic informed the contact that the rear subframe was severely rusted with holes in the subframe. The vehicle was taken to the dealer, where it was determined that the rear subframe needed to be replaced. The vehicle was not repaired. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 19V323000 (Structure, Suspension). The manufacturer was notified of the failure and informed the contact that the VIN was not included in the recall. The failure mileage was approximately 129,000.
- NHTSA ID
- 11605184
- Incident
- Jul 15, 2024
- Mileage
- 129,000 mi
Suspension
Filed Jul 21, 2024
I'm filing a complaint as to substandard steel being used in the rear crossmember/rear subframe. Extensive corrosion has been confirmed upon a state inspection, which requires replacement at my personal cost. The front engine cradle was replaced in 2019, per a recall notice for the same extensive corrosion problem. A safety issue that needs to be addressed by Mazda.
- NHTSA ID
- 11603648
- Incident
- Jul 21, 2024
SteeringSuspension
Filed Jun 18, 2024
Completely rusted rear crossmember subframe
- NHTSA ID
- 11595019
- Incident
- May 9, 2024
Body & structureSuspension
Filed May 6, 2024
The contact's daughter owns a 2011 Mazda Mazda6. The contact stated that while her daughter was driving at an undisclosed speed, the steering wheel inadvertently moved to the left at a 30–35-degree angle. Additionally, the rear end of the vehicle swayed while coming to a stop. The vehicle was taken to an independent mechanic, who determined that the crossmember was severely corroded and the front driver's side crossmember had cracked. The vehicle was then towed to the dealer, where it was diagnosed that the front sub frame, sub frame link, sway bar, sub frame nuts, and bolts needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The contact related the failure to NHTSA Campaign Number: 19V323000 (Structure, Suspension); however, the VIN was not included in the recall. The failure mileage was approximately 89,000.
- NHTSA ID
- 11587143
- Incident
- Apr 13, 2024
- Mileage
- 89,000 mi
Suspension
Filed Apr 2, 2024
Rear subframe rusted and cracked in half when my daughter was on a major highway!
- NHTSA ID
- 11580652
- Incident
- Mar 29, 2024
Suspension
Filed Mar 16, 2024
My 2011 Mazda 6 rear suspension broke while my wife was driving our car on the highway. It could have killed my wife and son. The frame is rusted so bad that the lower control arm broke away from the frame, the rear wheel is barely hanging on it by one bolt on the front control arm. It is very much a safety issue and Mazda needs to take charge of the problem before someone dies in their vehicle. Our car has 106215 miles on it and we still owe alot of money on this thing.
- NHTSA ID
- 11577809
- Incident
- Mar 16, 2024
Steering
Filed Feb 9, 2024
Bought. A 2011 Mazda 6, and took it to a Mazda dealer for an inspection. They found the rear sub frame ie rear cradle to be extremely rusted out, the shocks on both side are detached, and the springs look like they may push through at any point and do more damage. The car is unsafe to drive and the dealer estimated a repair cost or $4322.99 to fix.
- NHTSA ID
- 11570961
- Incident
- Feb 8, 2024
Body & structureSuspension
Filed Feb 7, 2024
The rear cross member/subframe is completely rusted in two and the rear lower forward control arm is detached from cross member/subframe on both sides. There is currently an active recall for the front cross member due to accelerated corrosion from road salt but I’m not aware of any inclusion of the rear frame or suspension components tied in with this recall. It definitely needs added to it as this is VERY dangerous, possibly even more so than the front. Rest of the actual car body is fine, except for a little bit of surface rust. Please add this to the current corrosion recall! Car is registered in WV and is available for inspection anytime and I will be attaching pictures and I also have a video but it won’t let me post it on here.
- NHTSA ID
- 11570675
- Incident
- Mar 13, 2023
SteeringSuspension
Filed Dec 13, 2023
Turning onto a road, heard a loud thud from the front passenger corner. Car steering became highly erratic. Parked the car, noticed the front passenger wheel was crooked. Took it to the nearest shop and they said the crossmember was rusted completely through and snapped, causing the control arm to lose control. Found out there is a recall for the car model and year for this exact issue, but my car wasn't covered by it, so I did not receive notification of it, but it clearly affects this VIN as well.
- NHTSA ID
- 11559875
- Incident
- Dec 12, 2023
Suspension
Filed Dec 9, 2023
Noticed the left rear tire suddenly had a lot of negative camber and there were now clunking sounds while driving. Inspection showed that the rear crossmember is severely rusted with holes, cracks, and delamination. The left toe link mount is completely separated, the coil spring stoppers are detached and loose inside the springs, and the right coil spring has the top coil broken off. The front body connection of the rear crossmember is barely connected. The level of corrosion on the rest of the car is drastically less than the rear crossmember. Currently deciding whether and how to repair. (Pennsylvania)
- NHTSA ID
- 11559265
- Incident
- Dec 8, 2023
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers.