RoadVitals

1992 Plymouth Sundance Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Aug 6, 1999
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
5 investigations on file

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

99V212000

SEATS:FRONT ASSEMBLY:RECLINER

Aug 6, 1999
227,283 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE LOWER SEAT BACK ATTACHING BOLT ON THE DRIVER SEAT CAN FAIL AND SEPARATE.
The risk: IF THE BOLT FAILS WHILE THE VEHICLE IS BEING DRIVEN, THE DRIVER COULD LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE LOWER SEAT BACK ATTACHING BOLT ON THE DRIVER'S SEAT WITH A HIGHER STRENGTH BOLT THAT INCLUDES A SELF LOCKING NYLON PATCH.
DAIMLERCHRYSLER CORPORATIONManufacturer number 729View on NHTSA.gov
97V078000

SEATS:FRONT ASSEMBLY:RECLINER

May 10, 1997
148,000 units potentially affected
The defect: THE LOWER SEAT BACK ATTACHING BOLT ON THE DRIVER'S SEAT CAN FAIL AND SEPARATE.
The risk: IF THE BOLT FAILS WHILE THE VEHICLE IS BEING DRIVEN, THE DRIVER COULD LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE LOWER SEAT BACK ATTACHING BOLT ON THE DRIVER'S SEAT WITH A HIGHER STRENGTH BOLT THAT INCLUDES A SELF LOCKING NYLON PATCH.
CHRYSLER CORPORATIONView on NHTSA.gov
96V229000

STEERING: STEERING WHEEL/HANDLE BAR

Nov 18, 1996
675,000 units potentially affected
The defect: THE STEERING WHEEL ARMATURE STAMPING CAN CRACK AND SEPARATE FROM THE CENTER HUB ATTACHMENT TO THE STEERING COLUMN.
The risk: IF THE STEERING WHEEL SEPARATES FROM THE CENTER HUB ATTACHMENT TO THE STEERING COLUMN, LOSS OF CONTROL CAN OCCUR INCREASING THE RISK OF AN ACCIDENT.
The remedy: DEALERS WILL INSPECT THE STEERING WHEEL FOR ARMATURE CRACKS IN THE CENTER HUB ATTACHMENT AREA. ANY STEERING WHEELS SHOWING CRACKS WILL BE REPLACED. ALL OTHER VEHICLES WILL HAVE A REINFORCEMENT PLATE INSTALLED TO PREVENT STEERING WHEEL SEPARATION IN THE EVENT CRACKING OCCURS.
CHRYSLER CORPORATIONView on NHTSA.gov
92V015000

STEERING: STEERING WHEEL/HANDLE BAR

Feb 14, 1992
20,000 units potentially affected
The defect: THE ZINC PLATING OPERATION PERFORMED ON THE UPPER STEERING COLUMN SHAFT COUPLING BOLT CAUSED HYDROGEN EMBRITTLEMENT AND BREAKAGE OF THE BOLT.
The risk: FRACTURES OF THE UPPER STEERING COLUMN SHAFT COUPLINGBOLT RESULT IN A LACK OF COUPLING LOAD ON THE SHAFT AND LOSS OF STEERINGCONTROL.
The remedy: REPLACE THE ZINC PLATED BOLT WITH A PHOSPHATE PLATED BOLT.
CHRYSLER CORPORATIONView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE96036ClosedPreliminary Evaluation

THROTTLE WILL NOT RETURN TO THE POSITION

Opened May 14, 1996
Closed Oct 31, 1996

UNCONTROLLED ENGINE SPEED CONDITION RESULTS FRO THROTTLE SHAFT BINDING

VEHICLE SPEED CONTROL:LINKAGES
PE96008ClosedPreliminary Evaluation

SAFETY BLT LATCH OPERATION

Opened Jan 25, 1996
Closed Jun 28, 1996

There is no summary currently available

SEAT BELTS
EA95029ClosedEngineering Analysis

STEERING WHEEL SEPARATION

Opened Sep 26, 1995
Closed Nov 13, 1996

AFTER AN EXTENSIVE INVESTIGATION AND ANALYSIS, CHRYSLER HAS IDENTIFIED THE DEFECT AS A FATIGUE FAILURE, ORIGINATION IN THE HEAT AFFECTED REGION OF THE PROJECTION WELDS OF THE STEERING WHEEL HUB TO STEERING WHEEL ARMATURE ATTACHMENT.THE HUB IS THE PORTION OF THE STEERING WHEEL ASSEMBLY THAT CONNECTS IT TO THE STEERING COLUMN SHAFT AND IS ATTACHED TO THE UNDERSIDE OF THE STEERING WHEEL ASSEMBLY BY 4 WELDS.IF CRACKS DEVELOP IN THE HEAT AFFECTED REGION OF THE WELDS AND PROPAGATE THROUGH THE STEERING WHEEL ARMATURE TO EACH OF THE WELDS, THE STEERING WHEEL CAN SEPARATE FROM THE HUB.THIS IS A SLOW PROGRESSIVE FAILURE WHICH NORMALLY OCCURS AT HIGH MILEAGE.IN SOME CASES COMPLAINANTS HAVE REPORTED A LOOSENESS OR WOBBLING OF THE STEERING WHEEL PRIOR TO SEPARATION.TO REMEDY THIS DEFECT, CHRYSLER WILL INSPECT THE STEERING WHEELS OF THE AFFECTED VEHICLES FOR CRACKS IN THE HUB AREA.IF ANY CRACKS ARE FOUND, THE STEERING WHEEL WILL BE REPLACED.ALL OTHER VEHICLES WILL HAVE REINFORCING PLATES INSTALLED WHICH WOULD PREVENT A STEERING WHEEL SEPARATION SHOULD CRACKING OCCUR.

STEERINGLed to recall 96V229000
EA95017ClosedEngineering Analysis

SEAT BACK BOLT FAILURE

Opened May 31, 1995
Closed May 19, 1997

THE DRIVER SEAT BACK CAN COLLAPSE WITHOUT WARNING RESULTING IN POTENTIAL FOR LOSS OF VEHICLE CONTROL.THE LOWER BOLT (ONE OF TWO BOLTS THAT SUPPORTS THE SEAT BACK ASSEMBLY) CAN FATIGUE AND BREAK

SEATSLed to recall 97V078000
PE95002ClosedPreliminary Evaluation

SEAT BACK FAILURE

Opened Jan 13, 1995
Closed May 31, 1995

There is no summary currently available

SEATS

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .