2017 RAM 2500 Problems

The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic). The contact stated that while driving on several occasions at various speeds, the ABS warning light illuminated and the messages "Service ABS” and “Service Traction Control" were displayed. The contact added that while the cruise control was activated, the vehicle lunged forward while decelerating and the cruise control inadvertently deactivated. The contact stated that while driving over a bump in the roadway, the failure reoccurred, and the ABS warning light was flickering on and off with an audible chime. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was unknown.

This is in regard to safety recall C4B. I have been contacting RAM dealers for almost 5 years on this issue and they have not had parts the whole time. I am sure they are mandated to build vehicles with ABS and this is obviously a common issue if you finally required the recall. I see they had the parts available for the CAB/ CHASSIS models which is the same part. How can there be a recall and no action this is not a new issue that was sprung on them. When I complain to the dealer they tell me to simply park the truck if I am worried about it. This is pure frustration as I paid for the traction control and cruise control and ABS but none of this has been available for 5 years and it seems like there is zero recourse.

The recall C4B/NHTSB 24v-893 came out in January of 2025. The parts are still not available for this recall (per Chrysler/RAM). I have been driving my truck with a possible non-working ABS system for a year and a half, often pulling a 10,000 lb trailer. I feel that this is ridiculous that the part is still not available. If I had a wreck during this time, I guarantee that I would sue the crap out of Chrysler.

It’s been to the dealer several times and they claim the recall part is unavailable and Safety Risk The loss of ABS/ESC/Traction control may cause a vehicle crash without prior warning

truck is experiencing the active recall symptoms daily, but the manufacturer is denying a repair due to parts availability. I pull a trailer everyday and I been having break issues the ABS light goes on and off all day, driving on the freeway, streets and even when the truck is on park noise is annoying. Service electronic braking systems is on as well I been almost had accidents and loosing control with my trailer that I don’t feel safe anymore for me and my passengers.

It’s been to the dealer several times and they claim the recall part is unavailable and Safety Risk The loss of ABS/ESC/Traction control may cause a vehicle crash without prior warning

At 31,000 mile my horn is no longer working along with my steering wheel controls on the left side of the wheel. Upon researching online it seems these truck have a common issue with clock spring fail. This is concerning because not only does the clock spring provide power to the horn and steering wheel controls, it could also effect the airbag function.

This CHEAP fix is abhorrent! It calls for welding an adjustable part of the steering linkage rendering it non- adjustable when having the front end aligned in the future. Not to mention the effect of welding, potentially causing a problem with the integrity of the metal. The correct fix for this SAFETY issue is to REPLACE this steering linkage component, the entire Drag Link! NOT do a "back yard, shade tree mechanic" weld job on the steering linkage of all things! I am appalled that NHTSA approved such a thing. PLEASE revisit this issue and do the right thing. Require Chrysler (FCA US LLC) to REPLACE this defective part with the proper part. Note.... Chrysler is not welding the nuts on the drag links on trucks coming off the assembly line! They are coming off with proper, safe, adjustable drag links! I contacted FCA and they said they cannot redo the recall because it's out of the window to get it repaired again. This is not a safe fix. The recall says after this welding, the vehicle can still get a proper alignment from dealer, which is not true. I contacted the dealer and they said I should contact FCA, but that sent me back to my original issue. I can't get an alignment even though the recall fix says I can. I dealer refuses to do it. I bought this truck used from the dealer and they wouldn't fix it at the time either. I pull a fifth wheel trailer with my truck and I need an alignment. This recall weld fix is just not right, a cheap fix for a long-term problem and very unsafe. Please help and please point me in the right direction. Thank you

The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not available. The contact stated that while driving at various speeds, the ABS and check engine warning lights illuminated. The vehicle was initially taken to the dealer to be diagnosed. The diagnostic test determined that there was a failure with the ECM. The ECM was replaced; however, soon after the repair, the warning lights returned with the vehicle going into LIMP Mode. The vehicle was taken back to dealer, where the vehicle remained for months while attempting to determine the cause of the failure. The contact was then informed that the transmission needed to be replaced. The contact was provided an estimate for the repair, and the vehicle was towed to an independent mechanic, where a diagnostic test indicated a failure with the hydraulic control unit (HCU). Several repairs were performed, but failed to correct the failure. The mechanic replaced the transmission twice; however, the failure returned after each repair. The manufacturer was notified about the failure, and the contact was provided with two case numbers. The vehicle was not repaired and remained with the independent mechanic. The failure mileage was 82,792.

My 2017 Ram 2500, 6.4L Hemi experiences warning lights which I'm told is caused by intermittent PCM failure. I'm told this can cause the truck to stall while in motion, refuse to start, or enter "limp mode". This amounts to a possible unsafe condition that can put myself and passengers at risk of property damage, bodily injury or worse. I brought the truck to Priority Automotive of Westerly, LLC on March 9, 2026 for diagnosis. Their diagnosis (attached) recommended replacing the PCM to correct (possibly), "...intermittent internal short(s)". Cost of the repair is $2,012.42. Subsequently, I contacted customer care at Stellantis (866-726-4636) and was given Case #[XXX]. I was told to make an appointment at the aforementioned dealership and call them the day before the appointment, so they could send a representative to the dealership for examination. I did exactly that to no avail. No one from Stellantis even contacted the dealership on the appointment date. I called them to find out what happened, only to find out (from a supervisor) that they are not offering assistance in the matter. Additionally, the truck is currently under recall #C4B/NHTSA 24V-896 (PCM related) and, to-date, I'm told the part is still not available after more than a year since the recall. I've owned Dodge Rams for over 27 years and find the situation unsafe and totally unacceptable. I'm also aware that many other owners of the 2017 Ram 2500 6.4L experience PCM/ECM issues, causing no-start conditions or stalling, and have reported them alongside braking system complaints. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The Variable Geometry Turbo (VGT) actuator stuck and failed causing also the turbo fan to heat degradation that needed also to be replace. Cost of damage was $4680.00.

The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not available. The contact stated that while driving at various speeds, the ABS and check engine warning lights illuminated. The vehicle was initially taken to the dealer to be diagnosed. The diagnostic test determined that there was a failure with the ECM. The ECM was replaced; however, soon after the repair, the warning lights returned with the vehicle going into LIMP Mode. The vehicle was taken back to dealer, where the vehicle remained for months while attempting to determine the cause of the failure. The contact was then informed that the transmission needed to be replaced. The contact was provided an estimate for the repair, and the vehicle was towed to an independent mechanic, where a diagnostic test indicated a failure with the hydraulic control unit (HCU). Several repairs were performed, but failed to correct the failure. The mechanic replaced the transmission twice; however, the failure returned after each repair. The manufacturer was notified about the failure, and the contact was provided with two case numbers. The vehicle was not repaired and remained with the independent mechanic. The failure mileage was 82,792.

The steering components are causing it to be difficult keeping the vehicle in the driving lane; the vehicle wanders from side to side. Two seperate Dealers cannot locate the problem.

Recall for the drag link on this series of 2500 trucks calls for welding an adjustable part of the steering linkage - the drag link jam nuts, rendering that part non-adjustable. Once welded, to then perform an alignment the welds would need to be carefully ground off, alignment work performed, and then once again everything re-torqued and welded back in place per the recall advisory steps. Also consider the effects of welding, grinding, and welding again and again over the life of this HD truck. An alignment is critical to towing thousands of pounds, pulling to the side and overcorrecting while towing a load because a simple alignment is no longer possible is arguably just as dangerous as the original issue attempted to be mitigated (loss of steering). The correct fix for this safety issue is to replace this drag link component, not render the truck unusable. A new drag link without this issue has been engineered and made available for sale, but my VIN says its not eligible for it as a covered recall repair. This is an OEM design failure with a short-sighted workaround that renders the vehicle useless over time; seems ridiculous for the customer to be financially responsible for this failure. Attached photo is of the welded, "recall completed", drag link on my now horribly misaligned truck.

truck is experiencing the active recall symptoms daily, but the manufacturer is denying a repair due to parts availability. I pull a trailer everyday and I been having break issues the ABS light goes on and off all day, driving on the freeway, streets and even when the truck is on park noise is annoying. Service electronic braking systems is on as well I been almost had accidents and loosing control with my trailer that I don’t feel safe anymore for me and my passengers.

The contact owns a 2017 Ram 2500. The contact stated while driving at undisclosed speeds and towing a trailer, the gooseneck ball detached from the bed of the truck and the trailer disconnected from the vehicle. The contact was able to pull over safely. There were no warning lights illuminated. The contact called the local dealer, but the vehicle was not diagnosed or repaired. The contact related failure to NHTSA Campaign Number: 18E028000 (Trailer Hitches). The manufacturer was contacted, and the contact was informed that there was no recall coverage for the failure and referred the contact to the NHTSA Hotline. The failure mileage was approximately 98,000.

My truck will lose all throttle response and brakes harder to stop accompanied by a service electronic brake system, service electronic throttle control, and electronic traction control warning. It only happens intermittently and sometimes will go a few weeks before doing it again. (The date below for incident is latest date it happened)

The check engine light came on and I took the vehicle to the Ram service center. The tech said the turbo actuator caused the light to go on. He reset the computer and said to bring the vehicle back if it comes on again. About 1 month later it reappeared. The Ram service said the turbo charger actuator needed replacing (the complete turbocharger). They said the failure could result in a total loss of power or engine failure. I tow a 10,000 lb trailer and an engine failure on the road could result in an accident or injury due to no power from the engine. The part can be viewed for inspection.

As I got in my truck and put the key in the ignition, my driver side power seat started to move forward on its own and would not stop, forcing me to open my door and remove my legs before it pinned my legs or worse, the seat stopped at the fully forward position with only a few inches between seat and bottom of dash.

TL* THE CONTACT OWNS A 2017 RAM 2500. THE CONTACT STATED WHILE DRIVING 30 MPH, AFTER TURNING OFF THE FRONT DRIVER HEATED SEAT OFF BUT STATED IT WAS AFTER 15 MINUTES AND THE HEATED SEAT WAS STILL ON. THE CONTACT STATED NO WARNING LIGHT WAS ILLUMINATED. THE CONTACT WAS CONSERVED IT MAY CAUSE A FIRE. THE VEHICLE WAS TAKEN MULTIPLE TIMES TO LOCAL DEALER BOSAK MOTORS (3111 W LINCOLN HWY, MERRILLVILLE, IN 46410: (219) 682-0497) AND WERE UNABLE TO DIAGNOSE THE FAILURE. THE CONTACT STATED HE CONTINUED TO EXPERIENCE THE FAILURE. THE MANUFACTURER HAD BEEN INFORMED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 10,000. *DT CONSUMER HAS TAKEN THE VEHICLE FOR REPAIRS 5 TIMES AND TOLD BY THE DEALER TO NO RESOLUTIONS COULD BE PROVIDED AT THIS TIME.

At 31,000 mile my horn is no longer working along with my steering wheel controls on the left side of the wheel. Upon researching online it seems these truck have a common issue with clock spring fail. This is concerning because not only does the clock spring provide power to the horn and steering wheel controls, it could also effect the airbag function.

As I approached stop sign and applied brakes the ABS and traction control light came on. My truck then started surging up and down As I attempted to proceed thru the red light my truck stalled and shutoff an on coming car had to stop aggressively to avoid hitting me

Vehicle: 2017 RAM 2500 6.7L Cummins purchased new in March 2018 with 300 miles on it from Phoenix, Arizona RAM dealership. Incident Date: [XXX]: The frame broke on both sides just behind the crew cab while traveling on a road at 5 mph. No rust present, no truck bed load. RAM dealership in Kingman, Arizona states on [XXX], through a diagnostic examination of this vehicle on behalf of my insurance company and me, they do not know why the frame broke. USAA Insurance Claim: Filed on [XXX] and denied coverage on [XXX]. Safety issue: 15 minutes earlier I had been traveling on the highway at 70 mph. The insurance adjuster made a statement that if the frame had broken while I was on the highway traveling at 70 mph, I would have died. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2017 Ram 2500. The contact stated while entering the vehicle, she noticed that the inside of the window and dashboard was covered with moisture. The contact stated that the rear basins were also filled with water. The contact took the vehicle to the local dealer, where it was diagnosed with needing both rear cab vents and brake lights to be replaced. The vehicle was repaired. The manufacturer had been informed of the failure. The failure mileage was 49,584.

Service Antilock Brake System & Service Electronic Brake System on 2017 Ram 6.4 hemi

The automatic high beam does not go from high to low automaticly.

While traveling westbound on I-64 at highway speed (~65 MPH), I experienced a complete tire failure of the driver's side front fire. It was first experienced as severe front-end vibration that made control of the vehicle difficult; there were no warnings or other indications of imminent failure. Fortunately, I was able to get the vehicle to the roadway's shoulder without injury or accident. Upon exiting the vehicle, I noticed that the left front tire was flat, and a portion of the tire's tread was protruding above the surface of the tire. Because of vehicle's location/proximity to the interstate, both vehicle occupants were at risk of serious injury if a crash were to occur; the vehicle was also a hazard to passing traffic. Minimizing some risks, we were assisted on scene by the Virginia State Police as well as a VDOT Motorist Assist vehicle until the vehicle was able to be towed away. Tire information: COOPER Discoverer AT3 285/60/20 purchased on 10 July 2021 Mileage at time of installation 56,707, mileage at time of failure 78,622 total miles on tire: 21,915 Tire is available for inspection

The contact owns a 2017 Ram 2500. The contact stated that on several occasions while driving at various speeds, the ABS, traction control, TPMS, and Forward Collision Avoidance warning lights illuminated. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 117,000. The contact stated Fiat/Chrysler/Ram Trucks is going to replace the hydraulic ABS module free of charge.

PASSENGER SITE WILL NOT ALARM (WARN DRIVER) AFTER THE VEHICLE HAD SOFTWARE UPDATE. THE DEALER IS UNABLE TO RESTORE THE PASSENGER ALERTING SYSTEM. SEE ALSO ODI 11185016. *DSY *DT *DT *TR *DT 'PARTS OF THIS DOCUMENT HAVE BEEN REDACTED TO PROTECT PERSONALLY IDENTIFIABLE INFORMATION PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).'*JB

VEHICLE WAS TAKE TO DEALERSHIP FOR MANUFACTURE'S RECALL OF THE PASSENGERS SEAT MODULE SOFTWARE UPDATED. BEFORE TAKING VEHICLE FOR THE SERVICE, ALL SEATS ALARM WHEN PASSENGER/S FAILED TO BUCKLE THEIR SAFETY RESTRAINTS, AFTER THE SOFTWARE UPDATE NONE OF THE SEAT WARNED DRIVER OF UNBUCKLED PASSENGER. RETURNED THE VEHICLE AND REPORTED FAULT, THE DEALERSHIP SAID THE VEHICLE WAS NOT EQUIPPED WITH THE ALARMING SYSTEM AND I WOULD NOT BE ALERTED OF BUCKLING FAILURES. FURTHER; FIAT CHRYSLER HAS INFORM ME VIA THE DEALER IS UNABLE TO REPAIR PROBLEM WORK ORDER 4230216/1 SEE ALSO ODI 11205409. *DSY *DT *BF *BF CONSUMER PLEASE REMEMBER, THE PASSENGER SIDE WARNING INDICATOR IS TOTALLY DEACTIVATED (DOESN'T WORK). THE PROCEDURE WAS UNEVENTFUL (DID NOT WORK), AS A RETIRED MAINTENANCE MAN I CAN AFFIRM. THE PROBLEM WITH MY VEHICLE HAS TO DO WITH CHRYSLER'S LACK OF TRAINED PERSONAL AND TELLING ALL CONCERNED THAT MY VEHICLE 'DOESN'T HAVE THAT OPTION'.*JB 'PARTS OF THIS DOCUMENT HAVE BEEN REDACTED TO PROTECT PERSONALLY IDENTIFIABLE INFORMATION PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).'*JB

The contact owns a 2017 Ram 2500. The contact stated that after starting the vehicle, the check engine warning light remained illuminated. The contact stated that a diagnostic scanner was used to retrieve DTC: P2609; which indicated a failure in the intake air heater system. The vehicle was not yet repaired. The local dealers were contacted and indicated that the part was not available to order. No further information was available. The manufacturer was not yet contacted regarding the failure or parts availability. The failure mileage was 123,200.

The contact owns a 2017 Ram 2500. The contact stated that while driving at approximately 30-35 MPH, the transmission became stuck in second gear and the vehicle went into LIMP Mode. The contact stated that the vehicle failed to accelerate above 35 MPH. The check engine warning light was illuminated. The contact used a scanner and retrieved DTC codes for pressure and gear ratio faults. The vehicle was taken to the local dealer, where it was diagnosed and determined that the transmission needed to be replaced. The vehicle was not repaired. The vehicle was taken to a transmission specialist, and it was determined that the failure was due to the valve body and shift solenoid. The manufacturer was not contacted. The failure mileage was approximately 105,369.

No heat on drivers side due to clogged heater core