RoadVitals

2024 Toyota Tundra Hybrid

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
4
Latest May 6, 2025
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
7
Latest Mar 24, 2026
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 4 NHTSA owner-reported complaints for the 2024 Toyota Tundra Hybrid, most frequently naming the brakes, electrical and powertrain (other) categories. 7 safety recalls have been issued covering this model year; and 150 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Brakes240.0%
  • Electrical120.0%
  • Powertrain (other)120.0%
  • Suspension120.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

7 campaigns cover this model year

View all 7

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
26V179000

EQUIPMENT:OTHER:LABELS

Mar 24, 2026
8,230 units potentially affected
The defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
The risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
The remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
Toyota Motor Engineering & ManufacturingManufacturer number See attached Part573View on NHTSA.gov
26V038000

BACK OVER PREVENTION:SOFTWARE

Jan 23, 2026
161,268 units potentially affected
The defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
The risk: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
The remedy: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.
Toyota Motor Engineering & ManufacturingManufacturer number 26TB02 / 26TA02View on NHTSA.gov
25V657000

BACK OVER PREVENTION:SOFTWARE

Oct 1, 2025
393,838 units potentially affected
The defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
The risk: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
The remedy: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
Toyota Motor Engineering & ManufacturingManufacturer number 25TB10 / 25TA10View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

BrakesPowertrain (other)
Filed May 6, 2025

The contact owns a 2024 Toyota Tundra Hybrid. The contact stated while driving 40-45 MPH uphill and depressing the brake pedal to come to a stop at the red traffic light, the brake pedal travelled down to the floorboard, and the vehicle failed to respond. There was no warning light illuminated. The contact stated that the vehicle started rolling backwards while in drive(D). The contact shifted to park(P), but the vehicle continued to roll backwards. The contact stated upon engaging the electric parking brake, the vehicle stopped. The contact stated that after the vehicle was turned off and restarted, the vehicle responded as needed. The vehicle was taken to the dealer, where the contact was informed that the failure could not be duplicated. The contact filled out a form to allow the vehicle data to be retrieved per the dealer's recommendation. The contact stated that the manufacturer's engineers were assisting the dealer in diagnosing the vehicle. The vehicle was not yet diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 11,200.

NHTSA ID
11659166
Incident
May 3, 2025
Mileage
11,200 mi
Electrical
Filed Mar 18, 2025

The contact owns a 2024 Toyota Tundra Hybrid. The contact stated that while driving 3-20 MPH, the instrument cluster multi-information display (MID) located near the left side of the steering wheel was scrolling independently, causing the gauge information to be replaced independently on the instrument cluster. Additionally, the contact stated that the left side of the steering wheel was warmer. There was no warning light illuminated. The dealer was notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and later informed the contact that the dealer had been contacted on the contact's behalf; however, no further assistance was provided. The failure mileage was 31,970.

NHTSA ID
11648958
Incident
Mar 16, 2025
Mileage
31,970 mi
Brakes
Filed Mar 4, 2025

The contact owns a 2024 Toyota Tundra Hybrid. The contact stated that upon starting the vehicle and attempting to depress the brake pedal, the brake pedal went to the floorboard with no resistance. The contact depressed the brake pedal again and on the third attempt, the brake pedal functioned as intended. There was no warning light illuminated. The vehicle was taken to a local dealer where the vehicle was diagnosed; however, the contact was informed that there was no cause for the failure found; however, a code for a brake communication failure was retrieved. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 3,400.

NHTSA ID
11646298
Incident
Feb 6, 2025
Mileage
3,400 mi
Suspension
Filed Aug 7, 2024

The contact owns a 2024 Toyota Tundra Hybrid. The contact stated that while the vehicle was exiting the local car wash, the contact heard a loud popping sound. The contact drove the vehicle 5 MPH the nearest safe location. The vehicle was towed to the dealer where it was diagnosed with fractured front driver’s and passenger’s side CV axles. The contact was informed that the CV axles needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 3,000.

NHTSA ID
11606995
Incident
Jul 31, 2024
Mileage
3,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

T-SB-0021-25 Rev1

ENGINE

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

26TE04

ENGINE

This Customer Support Program provides coverage as it applies to the engine turbocharger assemblies on certain 2022 – 2025 Model Year Tundra, 2022 – 2025 Model Year Tundra HV, and 2023 – 2025 Model Year Sequoia models. The specific condition covered by this program is for corrosion of the turbocharger assembly’s wastegate bushing and pin due to defects in materials or workmanship. If this occurs, the engine warning light will illuminate after engine start up and there could be a reduction in acceleration performance. When the engine warning light illuminates Diagnostic Trouble Code (DTCs) P25B372, P25B473, P25B572, and/or P25B673 are set in the engine Electronic Control Unit (ECU). If the condition is verified, the vehicle will be repaired with improved turbos under the terms of this Customer Support Program

26TE04

SERVICE BRAKES

This Customer Support Program provides coverage as it applies to the engine turbocharger assemblies on certain 2022 – 2025 Model Year Tundra, 2022 – 2025 Model Year Tundra HV, and 2023 – 2025 Model Year Sequoia models. The specific condition covered by this program is for corrosion of the turbocharger assembly’s wastegate bushing and pin due to defects in materials or workmanship. If this occurs, the engine warning light will illuminate after engine start up and there could be a reduction in acceleration performance. When the engine warning light illuminates Diagnostic Trouble Code (DTCs) P25B372, P25B473, P25B572, and/or P25B673 are set in the engine Electronic Control Unit (ECU). If the condition is verified, the vehicle will be repaired with improved turbos under the terms of this Customer Support Program

T-SB-0060-26

ENGINE

Some 2022 – 2025 model year Tundra and Tundra Hybrid and 2023 – 2025 Sequoia Hybrid vehicles may exhibit an MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): •P25B372 – Turbocharger/Supercharger Wastegate “A” Actuator Stuck Open •P25B473 – Turbocharger/Supercharger Wastegate “A” Actuator Stuck Closed •P25B572 – Turbocharger/Supercharger Wastegate “B” Actuator Stuck Open •P25B673 – Turbocharger/Supercharger Wastegate “B” Actuator Stuck Closed Visual inspection may reveal corrosion on the wastegate actuator linkage. The turbocharger assembly has been updated to prevent this condition from occurring.

T-SB-0049-26

POWER TRAIN

Some 2022 – 2025 model year Tundra Hybrid, 2023 – 2025 model year Sequoia Hybrid, 2024 –2025 Land Cruiser and Tacoma Hybrid, and 2025 4Runner Hybrid vehicles may exhibit a whine noise from the transmission when in Ready ON mode.

T-SB-0022-25 Rev2

SERVICE BRAKES

Some 2022 – 2026 model year Tundra, Tundra Hybrid, and 2023 – 2026 model year Sequoia Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Toyota Tundra Hybrid by model year
YearComplaintsRecallsInvestigationsIssue Index
2027000—
2026210—
2025150—
2024Viewing470—
2023290—
2022281—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.