RoadVitals

2016 Caterpillar CT660

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Oct 11, 2017
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2016 Caterpillar CT660. 1 safety recall has been issued covering this model year; and 38 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
17V641000

STEERING:LINKAGES:TIE ROD ASSEMBLY

Oct 11, 2017
4 units potentially affected
The defect: Caterpillar Inc. (Caterpillar) is recalling all 2016 Navistar CT660S trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
The risk: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.
The remedy: Caterpillar will notify owners, and dealers will tighten the castellated nut and tie rod, replacing them as necessary, free of charge. The recall began on December 08, 2017. Owners may contact Caterpillar customer service at 1-800-447-4986.
Caterpillar Inc.View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

TEBE896500

EQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.

Product Link models PL121/321s will stop sending data after April 6th, 2019. Date codes will appear as if coming from the past so the customer interface (UI) will not recognize those back dated messages and no data will appear in the UI.

TEBE886400

ENGINE

Engine software On Board Diagnostic (OBD) issues will be corrected, which will aid in engine malfunction identification and proper diagnosis. In addition, Diesel Exhaust Fluid (DEF) quality sensor monitors will be corrected to proper operating function.

TEBE876100

ELECTRICAL SYSTEM; ENGINE

Certain truck models that were built with 2013 through 2015 model year CT13 engines. Engine software OBD issues will be corrected which will aid in engine malfunction identification and proper diagnosis. In addition, under certain conditions, the Selective Catalytic Reduction (SCR) system inducement schedule may not function properly and may result in an increase in regulated air pollutants. Recalibration of the Engine Control Module (ECM) and Aftertreatment Control Module (ACM) needs to be completed.

M0093514-00

SUSPENSION

Lower shock absorber mounting bracket may break, this is due to that the shock absorber dimension is longer than the dimension between truck frame and suspension stop. Shock absorber effectively becomes stop and breaks the lower shock mount.

TEBE640800

ENGINE

There is a problem with certain truck models that were built with 2013 through 2015 model year CT13 heavy duty on board diagnostic (HDOBD) engines. These engines will require recalibration of the engine ECM and ACM (aftertreatment control module). Certain On Board Diagnostic (OBD) issues will be corrected which will aid in engine malfunction identification and proper diagnosis.

TEBE585600

ENGINE

There is a problem which relates to engine emissions on certain CT660, CT680, and CT681 On Highway Trucks that were built with 2016 model year compliant CT13 Engines. This recall will require recalibration of the engine ECM. Certain On Board Diagnostic (OBD) issues will be corrected which will aid in engine malfunction identification and proper diagnosis. CT660 (S/N: TEJ00291-00305) CT660 (S/N: TEP01890, 1926, 1967-2020, 2022-2102) CT680L (S/N: TRX00170-00188) CT680LG (S/N: TWT00112) CT681SG (S/N: TWJ00219-00221)

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Caterpillar CT660 by model year
YearComplaintsRecallsInvestigationsIssue Index
2017000—
2016Viewing010—
2015010—
2014010—
2013020—
2012030—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.