EQUIPMENT:RECREATIONAL VEHICLE/TRAILER
2022 Coachmen Mirada
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 2 NHTSA owner-reported complaints for the 2022 Coachmen Mirada, most frequently naming the suspension category. 1 safety recall has been issued covering this model year; and 5 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 2 months of data.
What owners report
Complaints grouped by the component NHTSA recorded
- Suspension2100.0%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
The contact owns a 2022 Coachmen Mirada ES RV built on a 2021 Ford F53 Chassis. The contact stated that the rear driver's side and rear passenger's side stabilizer bar brackets supporting the rear axles had fractured in half and were hanging on the ground. The contact stated that the vehicle was previously taken to an unknown dealer to be repaired under NHTSA Campaign Number: 22V731000 (Suspension) however, the dealer informed the contact that no issues were found, and the repair was not needed. The dealer and the manufacturer were not notified of the failure. The RV was not diagnosed or repaired. The failure mileage was 8,964.
- NHTSA ID
- 11585197
- Incident
- Apr 25, 2024
- Mileage
- 8,964 mi
Driver side rear sway mount bracket fell off. This is well documented on the internet and has been occurring for many years on the Ford F53 chassis. Sway bar keeps sway and body roll to a minimum while driving. Without the mount, it's ability to prevent sway is diminished. If the bracket fell off during travel, the large solid piece of metal and bolts would have fallen into road and potentially cause an accident or damage to another vehicle.
- NHTSA ID
- 11427793
- Incident
- Jul 31, 2021
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:REFRIGERATOR
According to a Furrion TSB "TB-220919": Irregular cooling performance has been reported on the identified refrigerators. The refrigerator compressor has been found to stop working and requires a âÃÂÃÂhard resetâÃÂàby disconnecting power to reset cooling operation. On occasion, disconnecting power does not reset operation and the refrigerator requires service replacement of the control boards. This TSB may not be applicable for some vehicles.
EQUIPMENT; STRUCTURE
As per Lippert's TSB 85-001-2022 There is a potential for some of the Gen1 jack legs on motorized units to bend or deform under extreme side loads. Note: The notification letter did not change. There is a revision to the remedy by Lippert Components. Forest River previously filed this TSB as "511576".
SUSPENSION
According to Ford's Final Notice of Recall 22V731: "In some of the affected vehicles, the rear stabilizer bar attachment bracket(s) weld-nuts may not be capable of supporting the required joint torque for this application and may have been damaged during the assembly process. During vehicle usage, the weld nuts attaching the rear stabilizer bracket may loosen, and the attachment bracket may break and/or the attachment bolts and the bracket may separate from the vehicle. It is possible that this may result in a road debris hazard."
STRUCTURE
As per Lippert's TSB 85-001-2022: There is a potential for some of the Gen1 jack legs on motorized units to bend or deform under extreme side loads.
STEERING; SUSPENSION
According to the notice from Ford 22S62: In some of the affected vehicles, the rear stabilizer bar attachment bracket(s) weld-nuts may not be capable of supporting the required joint torque for this application and may have been damaged during the assembly process. During vehicle usage, the weld nuts attaching the rear stabilizer bracket may loosen, and the attachment bracket may break and/or the attachment bolts and the bracket may separate from the vehicle. It is possible that this may result in a road debris hazard.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.