2009 Ford Explorer Sport Trac

On October 31, 2025, I was backing out of my driveway when multiple lights concerning the brakes came on. There had been no previous warnings about any issue with the brakes. My internet search revealed that it wasn't safe to drive, so I contacted Gary Yeoman Ford and they sent a rollback to pick the truck up. After Gary Yeoman performed tests, they confirmed that the ABS Module was defective and conducted a pinpoint test for code 1342 in system and found internal fault in module. According to Google, code B1342 can cause serious drivability issues. I have printouts from Google and Gary Yeoman Ford to support these statements. I will attempt to upload these documents from my phone. This is being filled out on a desktop and I have no scanner.

NHTSA ID

11710230

Incident

Oct 31, 2025

THE SEAT BELT WARNING LITE WANTS TO STAY ON.

NHTSA ID

11397692

Incident

May 10, 2009

Mileage

500 mi

WHEN IN 4 WHEEL DRIVE AND PUT IT IN PARK IT LOCKS UP. CAN NOT REMOVE AND GET OUT OF PARK.

NHTSA ID

11374539

Incident

Nov 2, 2020

Mileage

77,504 mi

TL* THE CONTACT OWNS A 2009 FORD EXPLORER SPORT TRAC. WHEN THE VEHICLE WAS ENGAGED IN PARK, THE KEY BECAME STUCK INSIDE THE IGNITION. THE CONTACT MENTIONED THAT HE MANUALLY PUSHED A PIN IN THE SHIFTER TO REMOVE THE KEY. THE CONTACT ALSO MENTIONED THAT THE GEAR WAS ABLE TO BE REMOVED OUT OF PARK WITHOUT THE KEY BEING IN THE IGNITION. THE VEHICLE WAS NOT TAKEN TO AN INDEPENDENT MECHANIC OR DEALER FOR REPAIRS. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 102,000.

NHTSA ID

11252869

Incident

Aug 1, 2019

Mileage

102,000 mi

WHILE DRIVING ON THE HIGHWAY, THE TIRE BLEW UP DUE TO A NAIL EMBEDDED IN THE TIRE. THE TIRE WAS RIPPED AWAY FROM THE RIM. THE SPARE WAS PLACED ON THE VEHICLE AND THEN DRIVEN TO THE DEALER WHERE THE TRUCK WAS PURCHASED. THE TIRE WAS DEEMED DEFECTIVE AS A NAIL EMBEDDED IN THE TIRE SHOULD NOT CAUSE IT TO RIP AWAY FROM THE RIM. *TR

NHTSA ID

10282828

Incident

Sep 1, 2009

Mileage

20,000 mi

MY NEW 2009 FORD EXPLORER SPORT TRAC WITH ADJUSTABLE PEDALS HAS THE ACCELERATOR PEDAL AND BRAKE PEDAL TOO CLOSE TOGETHER. I FIND MYSELF HITTING THE GAS AT THE SAME TIME I AM HITTING THE BRAKE. THIS IS AN ACCIDENT WAITING TO HAPPEN. I ALREADY HAVE RUN INTO AN INTERSECTION ONCE. *TR

NHTSA ID

10267020

Incident

Apr 19, 2009

Mileage

500 mi

Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k

All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.

This SKU is a front upper ball joint. The Customer communication requested return of unsold inventory to inspect for ball studs with excessive rotational friction in the ball joint assembly. Excessive friction in the ball joint assembly may cause a perceptible increase in steering effort.

Various vehicles equipped with a 4.6L, 5.4L, 6.8L modular 3 valve engine built on or before 8-Jan-2016 may exhibit symptoms that may include upper end engine noise, rough running, misfire and/or engine damage. If diagnosis leads to only camshaft/camshaft roller follower(s) requiring replacement, replace all of the camshaft roller followers on both banks/cylinder heads with part number 3L3Z-6564-A, not just the faulty roller follower(s). When replacing the camshaft roller followers, refer to Workshop Manual (WSM), Section 303-01.

Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab  select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab  select Dealer Installed Accessory or Accessory Installation.

2009-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 307-01 FOR MAIN CONTROL VALVE BODY (7A100) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN (GSB) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.