2014 Harley-Davidson Flstc

I BOUGHT MY BIKE BRAND NEW ON 08/31/14. AT EXACTLY 5000 MILES, (TECHNICALLY BEFORE THEN), THE REAR FACTORY DUNLOP D401 WAS SLICK. I TOOK THE BIKE TO THE DEALER, AND THEY SAID THE BIKE WAS PERFECT, ALIGNMENT WAS PERFECT, EVEN THE TIRE WEAR WAS PERFECT AND THAT SOMETIMES, BIKES JUST DO THAT. I DON'T BUY THAT. THEY REFUSED TO HELP ME WITH IT, SO I CONTACTED DUNLOP, WHO ALSO REFUSED TO HELP. SO, I BOUGHT A DUNLOP AMERICAN ELITE. I WANT TO STAY AMERICAN MADE. I HAVE A LITTLE OVER 7000 MILES ON IT, AND NOW IT NEEDS TO BE REPLACED. I DON'T THINK IT'S THE TIRES. I HAVE RUN DUNLOP'S ON OTHER BIKES FOR YEARS AND GOTTEN ANY WHERE FROM 10K-12K MILES AND THAT IS WITH BURN OUTS! TO DATE, I HAVE NEVER DONE A BURN OUT ON THIS HD. I HAVE TALKED TO OTHER FOLKS WHO HAVE THE SAME BIKE, AND THEIRS GET GOOD TIRE MILEAGE, AND I HAVE TALKED TO OTHERS WHO HAVE VARIOUS OTHER MODELS OF HD'S AND A COUPLE OF THEM HAVE THE SAME PROBLEM. IT IS IN THE BIKE SETUP. SOMEWHERE. I LOVE MY BIKE, BUT I DON'T HAVE 300 BUCKS TO SHELL OUT EVERY FEW MONTHS BECAUSE THE TIRE IS SLICK. MY FRONT TIRE IS STILL THE FACTORY TIRE AND WILL STILL PASS STATE INSPECTION. I DON'T GET IT. LESS THAN 13K MILES, AND ALREADY NEED A 3RD TIRE!

NHTSA ID

10762656

Incident

Feb 10, 2015

Mileage

5,000 mi

TL* THE CONTACT OWNS A 2014 HARLEY DAVIDSON FLSTC. THE CONTACT STATED THAT THE MOTOR WOULD BECOME EXTREMELY HOT. THE DEALER DIAGNOSED THAT THE OIL TANK WAS TOO CLOSE TO THE SEAT AND AS A RESULT, AN AIR COOL FILTER AND SHIELD GUARD NEEDED TO BE INSTALLED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 300. ## VIN PASSED ## HARLEY DAVIDSON HERITAGE SOFTAIL CLASSIC 2014 ##

NHTSA ID

10661964

Incident

Sep 1, 2014

Mileage

300 mi

WHILE SITTING AT A RED LIGHT, MY CLUTCH DISENGAGED CAUSING MY MOTORCYCLE TO LUNGE FORWARD. I HAD TO APPLY BRAKE AND WAS NOT ABLE TO CHANGE GEAR TO NEUTRAL AS CLUTCH WOULD NOT ENGAGE. LUCKILY I WAS FIRST IN LINE AND WAS ABLE TO MOVE IT INTO CROSSWALK IN FRONT OF MEDIAN. I AM NOT SURE IF IT WAS BECAUSE BIKE WAS HOT AS AFTER ABOUT 10 MINUTES IT RAN NORMAL INCLUDING CLUTCH. HOWEVER, RESEARCHING PROBLEM I NOTICED OTHER MAKES SAME YEAR HAD RECALL ON CLUTCH AND THOUGHT IT MIGHT BE USEFUL INFORMATION IN CASE OTHERS HAVE SIMILAR INCIDENCES TO PREVENT SOMETHING SERIOUS FROM HAPPENING. AS I JUST HAPPENED TO GET LUCKY WHEN IT HAPPENED, I COULD HAVE EASILY LUNGED OUT INTO CROSS TRAFFIC AT THE INTERSECTION AND/OR HIT PERSON IN FRONT OF ME IF THERE WAS ONE. *TR

NHTSA ID

10631380

Incident

Sep 5, 2014

Mileage

1,600 mi

SERVICE BULLETIN M1391A (REVU): MIDTRONICS GRX-3110 AND DCA-8000 SOFTWARE. PURPORSE: Revision U. The purpose of this bulletin is to inform the dealer network that a software update to the GRX-3110 and DCA-8000 is now available. DYNAMIC DIAGNOSTIC CHARGER SYSTEM (PART NUMBER: DCA-8000). [Rev U] Added: Description of improvements made to the testing algorithm for GRX software Version P and DCA-8000 software Version E.

GENUINE MOTOR PARTS AND ACCESSORIES BULLETIN PAB1171 (REV B): SOFTWARE UPDATE FOR SCREAMIN EAGLE PRO STREET TUNER. PURPOSE: Revision B. Updated: Summary. The App has returned to the Apple App Store. This bulletin informs dealers that a recent software update to the Screamin' Eagle Pro Street Tuner application will require the use of a Personal Computer (PC) to complete a Bluetooth Communication Interface (BCI) firmware update.

SERVICE BULLETIN M1490 (V 25.8.9): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 25.8.9 Release Date: Week of September 2, 2025. Changes: LiveWire 2024 S2MH: Removal of incorrect Electro Hydraulic Control Unit (EHCU) reflash support; EHCU Module (Part No. 41100123): Addressed issue where module became unrecoverable after failed reflash attempted. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

SERVICE BULLETIN M1490 (V 25.8.7): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 25.6.4, Release Date: Week of August 19, 2025. Includes New Features and Changes for the Models & Model Years listed. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

SERVICE BULLETIN M1391A (REV T): MIDTRONICS GRX-3110 AND DCA-8000 SOFTWARE. PURPORSE: Revision T. The purpose of this bulletin is to inform the dealer network that a software update to the GRX-3110 and DCA-8000 is now available. DYNAMIC DIAGNOSTIC CHARGER SYSTEM (PART NUMBER: DCA-8000). [Rev T] Updated: New Software Update, Previous Software Updates and DCA-8000. Added: 192-210335P. Software update 192-210335P for GRX-3110 and DCA-800 to add new battery part numbers.

SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.