SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
2023 Husqvarna Fe 501 S
Recalls, owner-reported complaints, investigations and safety data
Overview
Our database contains no NHTSA owner-reported complaints for the 2023 Husqvarna Fe 501 S. 3 safety recalls have been issued covering this model year; and 2 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Safety recalls
3 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govSERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
TIRES:TREAD/BELT
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
No owner complaints recorded for this model year
Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
SERVICE BRAKES
Husqvarna Mobility North America, Inc. has determined that a defect which relates to motor vehicle safety exists with certain 2022, 2023 and 2024 Husqvarna motorcycles equipped with BRAKTEC front brake calipers. Irregularities were found in the casting structure of one of our brake supplier's subcontractors. In the worst case, this can lead to the front brake caliper cracking in the area around the upper guide pin. See Figures 1 and 2. If the front brake caliper cracks at the upper guide pin it may reduce the braking systems effectiveness. For this reason, the manufacturer of the brake caliper casting must be checked on affected vehicles and replaced if necessary. The differentiation between the suppliers of the cast raw parts of affected vehicles can be seen directly on the brake caliper, see Figures 3 and 4.
WHEELS
Continental Tire the Americas, LLC (CTA) has determined that certain TKC 80 tires fail to conform to Federal Motor Vehicle Safety Standard No. 119, "New pneumatic tires - other than passenger cars." CTA has initiated a tire safety recall to remove these tires from service. The Husqvarna motorcycle models listed above were originally equipped with TKC 80 brand tires. CTA has determined that groove cracks in the tread rubber developed during internal testing. Groove cracking may appear during the tire service life and can lead to tread separation, increasing the risk of a crash. On the specified 701 Enduro Models listed above only the originally equipped TKC 80 front tire is affected and needs replaced. On the specified FE 250, 350, and 501 Models listed above both the originally equipped TKC 80 front and rear tires are affected and need replaced. Customers that still have originally equipped TKC 80 tires mounted on their motorcycle are eligible to have the recall tire replacement performed by an authorized Husqvarna Motorcycles dealer.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.