RoadVitals

2022 Husqvarna Fe 501 S

Recalls, owner-reported complaints, investigations and safety data

NHTSA has issued a “do not drive” advisory affecting this model year.

Campaign 22V014000. Confirm whether your specific vehicle is covered using its VIN before acting on this.

Check your VIN on NHTSA.gov
Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
5
Latest Jul 8, 2026
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2022 Husqvarna Fe 501 S. 5 safety recalls have been issued covering this model year; and 3 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

5 campaigns cover this model year

View all 5

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
26V443000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER

Jul 8, 2026
6,257 units potentially affected
The defect: KTM North America, Inc. (KTM) is recalling certain 2022-2024 Husqvarna FE 501S, Husqvarna FE 350S, 2024 GasGas ES 350, and GasGas ES 500 motorcycles. During backwards rolling, the brake caliper may crack near the primary pin casting, which may cause the caliper to break when riding.
The risk: Cracks or breaks in the rear brake caliper can reduce braking ability, increasing the risk of a crash.
The remedy: Dealer will replace the rear brake caliper, free of charge. Owner notification letters are expected to be mailed September 2, 2026. Owners may contact KTM and Husqvarna customer service at 1-888-985-6090. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov July 15, 2026.
KTM North America, Inc.View on NHTSA.gov
25V074000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER

Feb 7, 2025
5,116 units potentially affected
The defect: KTM North America, Inc. (KTM) is recalling certain 2022-2024 Husqvarna FE 350s, FE 501s, and 2024-2025 GASGAS ES 350 and ES 500 motorcycles. The front brake caliper may crack in the area around the upper guide pin.
The risk: A broken front brake caliper can cause a loss of front brake function, increasing the risk of a crash.
The remedy: Dealers will inspect and replace the front brake caliper, as necessary, free of charge. Owner notification letters were mailed March 11, 2025. Owners may contact KTM customer service at 1-888-985-6090.
KTM North America, Inc.View on NHTSA.gov
22V588000

TIRES:TREAD/BELT

Aug 5, 2022
27,399 units potentially affected
The defect: KTM North America, Inc. (KTM) is recalling certain 2019-2023 Husqvarna and KTM motorcycles with equipped with TKC80 tires. Please refer to KTM's recall report for specific model details. Cracks longer than 3/16 inch may develop in the tread grooves. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 119, "New Pneumatic Tires-Other Than Passenger Cars."
The risk: Cracks in the tread can lead to tread separation, increasing the risk of a crash.
The remedy: Dealers will replace the affected tires, free of charge. Owner notification letters were mailed September 16, 2022. Owners may contact KTM's customer service at 1-888-985-6090. KTM's numbers for this recall are KTB2208 and HTB2207.
KTM North America, Inc.Manufacturer number KTB2208; HTB2207View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

HTB2502

SERVICE BRAKES

Husqvarna Mobility North America, Inc. has determined that a defect which relates to motor vehicle safety exists with certain 2022, 2023 and 2024 Husqvarna motorcycles equipped with BRAKTEC front brake calipers. Irregularities were found in the casting structure of one of our brake supplier's subcontractors. In the worst case, this can lead to the front brake caliper cracking in the area around the upper guide pin. See Figures 1 and 2. If the front brake caliper cracks at the upper guide pin it may reduce the braking systems effectiveness. For this reason, the manufacturer of the brake caliper casting must be checked on affected vehicles and replaced if necessary. The differentiation between the suppliers of the cast raw parts of affected vehicles can be seen directly on the brake caliper, see Figures 3 and 4.

HTB2207

WHEELS

Continental Tire the Americas, LLC (CTA) has determined that certain TKC 80 tires fail to conform to Federal Motor Vehicle Safety Standard No. 119, "New pneumatic tires - other than passenger cars." CTA has initiated a tire safety recall to remove these tires from service. The Husqvarna motorcycle models listed above were originally equipped with TKC 80 brand tires. CTA has determined that groove cracks in the tread rubber developed during internal testing. Groove cracking may appear during the tire service life and can lead to tread separation, increasing the risk of a crash. On the specified 701 Enduro Models listed above only the originally equipped TKC 80 front tire is affected and needs replaced. On the specified FE 250, 350, and 501 Models listed above both the originally equipped TKC 80 front and rear tires are affected and need replaced. Customers that still have originally equipped TKC 80 tires mounted on their motorcycle are eligible to have the recall tire replacement performed by an authorized Husqvarna Motorcycles dealer.

HTB2111

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; SERVICE BRAKES, HYDRAULIC

In the effort of continuous product development and safety the originally mounted brake pad retaining “R” clips must replaced with the new version retaining “R” clips and they must be mounted on the front brake and rear brake caliper brake pad securing pins. Husqvarna Motorcycles North America, Inc. has determined that a defect which relates to motor vehicle safety exists with certain 2022 model motorcycles listed on page 1 pertaining to the brake pad retaining “R” clips on the front brake caliper. On affected motorcycles there is a possibility that the brake pad retaining “R” clips on the front brake caliper can unfasten and fall out and get lost while riding. This can result in the brake pad securing pin being lost which could reduce front braking performance. For this reason and to ensure the highest level of safety, performance, reliability and customer satisfaction, the brake pad securing pin retaining “R” clips on the front brake caliper must be replaced on all affected motorcycles. The brake pad retaining “R” clips on the rear brake caliper brake pad securing pin must also be replaced at the same time during this repair to prevent the mixing up of retaining “R” clips by equipping the motorcycle with like clips on both the front brake and rear brake caliper to have a unification of the “R” clips.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Husqvarna Fe 501 S by model year
YearComplaintsRecallsInvestigationsIssue Index
2024020—
2023030—
2022Viewing050—
2021010—
2020010—
2018100—
2017100—
2015010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.