AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE; AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
2009 INFINITI M35
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 16 NHTSA owner-reported complaints for the 2009 INFINITI M35, most frequently naming the engine, brakes and electrical categories. 6 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 68 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
View as table
| Month | Complaints filed | Cumulative |
|---|---|---|
| Jul 2009 | 1 | 1 |
| Jan 2010 | 1 | 2 |
| Feb 2010 | 1 | 3 |
| Nov 2010 | 2 | 5 |
| May 2011 | 1 | 6 |
| Feb 2012 | 1 | 7 |
| Apr 2014 | 1 | 8 |
| May 2014 | 2 | 10 |
| Feb 2016 | 1 | 11 |
| Aug 2016 | 1 | 12 |
| Nov 2016 | 1 | 13 |
| May 2017 | 1 | 14 |
| Jan 2019 | 1 | 15 |
| Jan 2020 | 1 | 16 |
What owners report
Complaints grouped by the component NHTSA recorded
- Engine423.5%
- Brakes211.8%
- Electrical211.8%
- Steering211.8%
- Airbags211.8%
- Suspension15.9%
- Driver assistance15.9%
- Fuel system15.9%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
6 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
AFTER INFINITI'S RECALL REPAIR FOR A DEFECTIVE AIRBAG, MY DASHBOARD HAS: 1. DEVELOPED CRACKS - LONGEST ~1.5" 2. STARTED TO BECOME STICKY IN PLACES AND DETERIORATE (BLACK RESIDUE) ONTO A CLOTH WHEN WIPED ONLY USING WATER 3. OTHERS HAVE CITED THESE SAME OR WORSE PROBLEMS ON WWW.CARGURUS.COM 4. NISSAN CONSUMER AFFAIRS OFFERED NO RESOLUTION
- NHTSA ID
- 11302541
- Incident
- Jan 24, 2017
- Mileage
- 65,000 mi
HELLO, JUST WANT TO LET YOU GUYS KNOW THAT MY CAR HAS A SERIOUS PROBLEM. I HAVE TAKEN TO INIFINITI AND ALSO CARMAX, WHICH IS WHERE I BOUGHT MY CAR. MY CAR TENDS TO ACCELERATE WHEN I DRIVE DOWN HILL. THE RPM IN MY CAR TENDS TO GO FROM 1 OR 2 AND IT JUMPS TO 4 OR 5. FOR THE PAST 2 YEARS I'VE BEEN TELLING THEM THAT THERE IS SOMETHING WRONG WITH THE CAR. YET THEY TELL ME THAT IT'S ME ACCELERATING THE CAR, OR THAT THE CAN'T DUPLICATE THE PROBLEM. I DON'T KNOW WHAT TO DO WITH MY CAR. THE IS UP TO DATE WITH ALL THE RECALLS.
- NHTSA ID
- 11166026
- Incident
- Jun 3, 2017
MARCH 7, 2017, NISSAN AGREED TO REPLACE THE STEERING COLUMN LOCK ON THE 2009-2010 ALTIMAS AND MAXIMA DUE TO THE MALFUNCTIONING OF THE ELECTRIC STEERING COLUMN LOCK FREE OF CHARGE. I HAVE THE EXACT PROBLEM WITH MY 2009 INFINITI M35X WHICH NISSAN ALSO MAKE. THERE NEED TO BE A RECALL ON THIS ELECTRONIC PART FOR ALL INFINITI, ALTIMA, AND MAXIMA. IT COST $900 TO $1,500 TO REPLACE THE PART. I HAVE BEEN STRANDED SEVERAL TIMES. SOME TIMES IN DANGEROUS LOCATIONS LATE AT NIGHT WITH MY CHILDREN. THE CAR COST ME ENOUGH, NOW I HAVE TO BUY A PART THAT MIGHT FAIL SOON THEN I WILL HAVE TO SPEND ANOTHER GRAND OR SO. RECALL PLEASE
- NHTSA ID
- 10991084
- Incident
- May 1, 2017
- Mileage
- 119,000 mi
TAKATA RECALL- DEALERS CLAIM THEY HAVE NO PARTS TO RESPOND TO THIS RECALL. THE RECALL NOTICE CLAIMS IT IS DANGEROUS TO HAVE ANYONE IN PASSENGER SEAT.
- NHTSA ID
- 10925136
- Incident
- Nov 9, 2016
- Mileage
- 86,000 mi
TL* TAKATA RECALL. THE CONTACT OWNS A 2009 INFINITI M35. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V349000 (AIR BAGS); HOWEVER, THE PART FOR THE RECALL REPAIR WAS UNAVAILABLE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. PARTS DISTRIBUTION DISCONNECT. UPDATED 09/22/16*LJ UPDATED 10/05/16.*JB
- NHTSA ID
- 10892220
- Incident
- Aug 1, 2016
DASHBOARD IS WITH EXTENSIVE CRACKING AND YELLOW FOAM EXPOSED. ALSO DASHBOARD IS STICKY TO TOUCH WITH SHINY APPEARANCE.
- NHTSA ID
- 10836363
- Incident
- Jan 1, 2015
- Mileage
- 36,000 mi
EVERY TIME UPON FILLING THE FUEL TANK THE IN-DASH GAUGE DOES NOT REGISTER THE FULL AMOUNT. AFTER DRIVING A WHILE EVENTUALLY IT DOES CREEP BACK UP BUT NOT TO FULL. THE PROBLEM SEEMS TO BE PROGRESSIVELY GETTING WORSE. THE PROBLEM APPEARS TO BE IN THE SENSORS IN THE FUEL TANK, JUST GUESSING, BECAUSE ALL THE OTHER IN DASH GAUGES SEEM TO BE WORKING FINE. *TR
- NHTSA ID
- 10593316
- Incident
- Nov 1, 2013
- Mileage
- 62,000 mi
TL* THE CONTACT OWNS A 2009 INFINITI M35. THE CONTACT STATED WHILE DECELERATING AT AN UNKNOWN SPEED, THE STEERING WHEEL SHOOK VIOLENTLY AND THE CONTACT HEARD A GRINDING NOISE COMING FROM THE FRONT END OF THE VEHICLE WHEN MAKING TURNS. THE VEHICLE WAS TAKEN TO THE DEALER WHO STATED THAT THE ROTORS WERE WARPED. THE DEALER WAS UNABLE TO DUPLICATE THE FAILURE OF THE GRINDING NOISE. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 32,000. THE VIN WAS NOT AVAILABLE.
- NHTSA ID
- 10587213
- Incident
- Jun 12, 2013
- Mileage
- 32,000 mi
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
STRUCTURE:BODY
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Infiniti by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
ELECTRICAL SYSTEM
CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ELECTRICAL SYSTEM
CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ELECTRICAL SYSTEM
INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
VISIBILITY/WIPER
REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
VISIBILITY/WIPER
WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.