Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 2 NHTSA owner-reported complaints for the 2000 Isuzu N-Series, most frequently naming the brakes, fuel system and seat belts categories. 55 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 2 months of data.
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
No recalls in our database for this model year
That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.
Reports submitted to NHTSA, shown in the owner's own words
FUEL PUMP PROBLEM AGAIN. THIS IS HAPPENING QUIT FREQUENTLY. THE DEALER REP STATED IT MOSTLY HAPPENS DURING THE HOT TIME OF THE YEAR OR JUST AFTER. HERE WE ARE AGAIN WITH A FUEL PUMP PROBLEM ! *NM
I HAVE A 2000 ISUZU PICK-UP HOMBRE AND I WAS HAVING PROBLEMS WITH THE FRONT DISC BRAKES THAT DID NOT WORK PROPERLY. IT SEEMED THAT EVERYTIME I PRESSED ON THE BRAKES, I HAD A HARD PUSH THEN SHORTLY AFTWARDS, THE BRAKES GAVE STOPPED THE VEHICLE. THIS FELT LIKE THE ABS WAS KICKING IN. AFTER TAKING THE VEHICLE TO AN ISUZU DEALER, THEY SAID THE BRAKES ARE A "WEAR" ITEM AND NOT COVERED BY THE WARRANTY. I KNOW A LITTLE ABOUT BRAKES AND TRUCKS AND CHANGED MANY DISC'S, SO I LOOKED TO SEE IF I COULD FIND WHAT WAS CAUSING THE PROBLEM. TO MY SURPRISE, THE DISC'S (ALL FOUR) WERE LARGER THAN THE ROTOR AND ALTHOUGH I HAVE OVER 30,000 MILES ON THE VEHICLE, I FOUND THAT BEING OVERSIZED, THE TOP OF EACH BRAKE PAD LAPPED OVER THE ROTOR APPROXIMATELY 1/8 TO 1/4 INCH. THIS WEAR PATTERN CAUSED THE TOP OF EACH DISC TO OVERLAP THE TOP OF EACH ROTOR AND THIS TOP WAS ENGAGING PRIOR TO THE DISC MAKING CONTACT WITH THE ROTOR, WHICH LEAD TO THE DELAY OF ENGAGEMENT OF THE FULL DISC ON THE ROTOR. THIS ALSO MADE THE HARD CONTACT THEN ENGAGEMENT OF THE REST OF EACH DISC WHICH FELT LIKE THE ABS ACTIVATING. THE AMOUNT OF WEAR TO THE NON-WEAR ON THE TOP OF THE BREAK WAS APPROXIMATELY 1/4 INCH. I FILED OFF THE TOP OF EACH DISC TO GIVE A CLEAN SURFACE AND ROTOR CONTACT AND THE PROBLEM WENT AWAY. NOW THE ABS COMES ON INTERMITENTLY. THIS OVERHANG ON THE ROTOR TOP DUE TO THE OVERSIZE OF THE DISC'S IS A STRANGE SENSATION WHICH COULD GIVE A FALSE SENCE OF SECURITY, ESPECIALLY IF A SUDDEN STOP OCCURRED. IT ALSO GIVES A LOSS OF CONTROL ALONG WITH THE FALSE SENCE OF SECURITY. I BELIEVE THIS SHOULD BE INVESTIGATED AND IT SURELY IS A SUBSTANTIAL HAZARD FOR THE CONSUMER. I CONTACTED ISUZU, BUT THEY BLEW IT OFF AS A "FREEK OCCURANCE". SOUNDS FAMILIAR AS A CPSC INVESTIGAOR WHO HAS RECALLED A LOT OF PRODUCTS THAT THE MANUFACTURER ATTRIBUTE TO A FREEK OCCURRANCE. THIS IS A POSSIBLE LIFE THREATING DEFECT. SINCERELY
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
POWER TRAIN
THIS INFORMATION BULLETIN OUTLINES THE SERVICE PROCEDURE FOR INSTALLATION OF FLUID LEVEL INDICATOR JOINT TUBE ANYTIME THE AISIN TRANSMISSION IS REMOVED OR OIL PAN IS REMOVED AND REINSTALLED TO PREVENT WATER INTRUSION TO TRANSMISSION.
ELECTRICAL SYSTEM
THIS INFORMATION BULLETIN IS TO REMIND DEALERS WHENEVER THE IPC ASSEMBLY IS REPLACED IN AN AFFECTED ISUZU MANUFACTURED VEHICLE, THEY ARE TO AFFIX AN ODOMETER REPLACEMENT STICKER, AS THE ODOMETER IS NOT PROGRAMMABLE. THE STICKER SHOULD BE FILLED OUT COMPLETELY WITH THE DATE OF REPLACEMENT ALONG WITH THE MILEAGE FROM THE PREVIOUS ODOMETER READING, AND THE DEALER CODE OF THE DEALERSHIP REPLACING THE IPC.
ENGINE; POWER TRAIN
INFORMATION BULLETIN: THIS BULLETIN APPLIES TO ALL OEM AND REMANUFACTURED ENGINE AND TRANSMISSION ASSEMBLIES, FOR THE AFFECTED VEHICLES LISTED ABOVE, TO BE REPLACED UNDER THE ISUZU NEW VEHICLE WARRANTY, GOODWILL, ISUZU PARTS WARRANTY, GOLD STAR USED TRUCK WARRANTY AND/OR ALL EXTENDED POWERTRAIN WARRANTIES OFFERED BY ISUZU, AS WELL AS ALL OVER-THE-COUNTER ENGINE AND TRANSMISSION ASSEMBLY REPLACEMENTS.
ENGINE AND ENGINE COOLING
The following information is provided to clearly explain Isuzuâs policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regularly updated for many reasons. These reasons may include, but are not limited to: model year change, software corrections, certification compliance, product improvement and specific application requirements. However, the mere existence of a newer control module calibration does not necessarily mean that warranty coverage exists or that the calibration must be installed. It is not our policy to update control modules, under warranty or after warranty, based solely on the availability of a newer calibration file. Below are our guidelines for reprogramming control modules.
This bulletin outlines the procedures for using the Alpine Exchange Program (the "Exchange Program"). The Exchange Program must be used when any Alpine radio or other component covered by this bulletin is repaired under warranty and may also be used for radio and component repairs not covered under warranty. Contact Alpine directly for pricing and payment methods applicable to radio and component repairs not covered under warranty.
EQUIPMENT
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback. This bulletin was revised to add a Parts Warranty Form
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
| Year | Complaints | Recalls | Investigations | Issue Index |
|---|---|---|---|---|
| 2025 | 0 | 0 | 0 | — |
| 2024 | 0 | 1 | 0 | — |
| 2023 | 0 | 2 | 0 | — |
| 2022 | 1 | 2 | 0 | — |
| 2021 | 0 | 0 | 0 | — |
| 2020 | 0 | 0 | 0 | — |
| 2019 | 0 | 1 | 0 | — |
| 2018 | 0 | 1 | 0 | — |
| 2017 | 0 | 1 | 0 | — |
| 2016 | 0 | 0 | 0 | — |
| 2015 | 0 | 0 | 1 | — |
| 2014 | 0 | 0 | 1 | — |
| 2013 | 0 | 2 | 2 | — |
| 2012 | 0 | 1 | 1 | — |
| 2011 | 1 | 1 | 0 | — |
| 2010 | 1 | 1 | 0 | — |
| 2009 | 0 | 1 | 0 | — |
| 2008 | 0 | 1 | 0 | — |
| 2007 | 0 | 1 | 0 | — |
| 2006 | 0 | 1 | 0 | — |
| 2005 | 0 | 1 | 0 | — |
| 2004 | 1 | 1 | 0 | — |
| 2003 | 0 | 1 | 0 | — |
| 2002 | 3 | 1 | 0 | — |
| 2001 | 2 | 1 | 0 | — |
| 2000Viewing | 2 | 0 | 0 | — |
| 1999 | 3 | 0 | 0 | — |
| 1998 | 6 | 0 | 0 | — |
| 1997 | 0 | 0 | 0 | — |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.