ENGINE
When long block is received, inspection needs to be performed per SOL S2609000010 before the repair begins. If the block machining is not complete according to information in SOL, a new long block will need to be ordered.
Recalls, owner-reported complaints, investigations and safety data
Our database contains no NHTSA owner-reported complaints for the 2024 Jeep Renegade. 122 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
No recalls in our database for this model year
That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.
Reports submitted to NHTSA, shown in the owner's own words
No owner complaints recorded for this model year
Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ENGINE
When long block is received, inspection needs to be performed per SOL S2609000010 before the repair begins. If the block machining is not complete according to information in SOL, a new long block will need to be ordered.
POWER TRAIN
Not applicable to vehicles built for US market. 1.5L Transmission Diagnosis Service Solution Customers may experience one or more of the following: SYMPTOM: ● Transmission warning light on and/or vehicle jerking. ● Vehicle is not shifting correctly or has no traction. This service bulletin is to provide a diagnostic guide for a transmission warning light on, vehicle jerking, not shifting correctly or no traction symptoms.
ENGINE
Mis-Machined Engine Block
ENGINE
Not applicable to vehicles built for US market. ENGINE – 1.5 GSE T4 MHEV - Malfunction Indication Light (MIL) P0016 Customers must experience a MIL illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0016 - Crankshaft/camshaft Timing Misalignment - Bank 1 Sensor 1. Check the trouble codes in the Engine Control Unit (ECU). Apply this document if the trouble code as mentioned is set (P0016). Fix Engine Timing and replace the cam-to-cam guide rail (“snubber”)
POWER TRAIN
Not applicable to vehicles built for US market. 1.5L Transmission Diagnosis Service Solution Customers may experience one or more of the following: ● Transmission warning light on and/or vehicle jerking. ● Vehicle is not shifting correctly or has no traction This service bulletin is to provide a diagnostic guide for a transmission warning light on, vehicle jerking, not shifting correctly or no traction symptoms.
ELECTRICAL SYSTEM
Not applicable to vehicles built for US market. Clutch Actuator Cylinder Motor Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P2787-00 Clutch 1 Temperature Too High. ● P28C7-00 Clutch A Motor Phase U-V-W Performance. ● P27F3-00 Clutch 2 Temperature Too High. ● P28D5-00 Clutch B Motor Phase U-V-W Circuit Performance. Customers may experience the following: ● Transmission warning light on or odd gears unavailable or even gears unavailable or reverse gear unavailable In case of a reported and ascertained fault, check and replace the worn/damaged components, if necessary, according to the Operating Cycle below.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.