RoadVitals

2008 Mack Cl

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Mar 21, 2011
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Oct 23, 2007
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 1 NHTSA owner-reported complaint for the 2008 Mack Cl. 1 safety recall has been issued covering this model year; and 60 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
07V497000

TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

Oct 23, 2007
950 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH A SAF HOLLAND SIMPLEX FIFTH WHEEL, THE LEVER ARM PIVOT BOLT MAY HAVE BEEN OVER TIGHTENED. AN OVER TIGHTENED PIVOT BOLT CAN DISTORT THE PIVOT BOLT SPACER SLEEVE, WHICH MAY PREVENT THE FIFTH WHEEL LATCH JAW FROM CLOSING AND LATCHING SECURELY AROUND THE TRAILER KING PIN.
The risk: THERE IS A POSSIBILITY THAT THE PIVOT BOLT CAN BECOME LOOSE WITHOUT THE DRIVER'S KNOWLEDGE. WHEN THIS OCCURS, THE DRIVER COULD DRIVE AWAY AND THE TRAILER COULD BECOME DISENGAGED, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REPLACE THE PIVOT BOLT AND SLEEVE WITH A HEX HEAD SHOULDER BOLT AND WASHER FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 28, 2008. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0331View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Filed Mar 21, 2011

2008 MACK SEMI, UNIT 1 AND UNIT 2 WERE EASTBOUND ON THE OHIO TURNPIKE. UNIT 2 STATED ICE FROM UNIT 1 TRAILER FLEW OFF HIS VEHICLE STRIKING UNIT 2 WINDSHIELD. UNITS MOVED FURTHER UP THE ROAD FROM AREA OF IMPACT. NO ICE WAS FOUND ON THE ROADWAY. OFFICER STATED, HE CHECKED UNIT 1 FOR ANY SNOW/ICE ON THE TRAILER AND SAW NONE FROM THE INSPECTION FROM GROUND LEVEL. *BF (OHIO TRAFFIC CRASH REPORT #10-0098-91)*JB UPDATED 03/29/11 *BF

NHTSA ID
10393181
Incident
Feb 9, 2011

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

CBR 2362-3 202604

POWER TRAIN

CBR - Mack Carrier Nut Adhesive Change.

CBR 2573-1 202604

POWER TRAIN

CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.

CBR 820-9 202601

ENGINE; VEHICLE SPEED CONTROL

CBR - Mack Chassis - Engine Brake Only Works With The Brake Pedal, No Function During Cruise. US07 And Newer Emissions, Model Year 2008 And Newer.

CBR 2488 072025

ELECTRICAL SYSTEM

CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data.

CBR 407 072025

ELECTRICAL SYSTEM; SERVICE BRAKES

CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded.

CBR-407 202409

SERVICE BRAKES

CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mack Cl by model year
YearComplaintsRecallsInvestigationsIssue Index
2008Viewing110—
2007030—
2006020—
2005020—
2004020—
2003020—
2002030—
2001040—
2000040—
1999160—
1998120—
1997010—
1996010—
1995110—
1994010—
1993020—
1992030—
1991020—
1990020—
1989020—
1988020—
1987010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.