ELECTRICAL SYSTEM:IGNITION:SWITCH
1990 Mazda 323
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 19 NHTSA owner-reported complaints for the 1990 Mazda 323, most frequently naming the seat belts, driver assistance and engine categories. 2 safety recalls have been issued covering this model year; 2 NHTSA investigations name it; and 24 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
View as table
| Month | Complaints filed | Cumulative |
|---|---|---|
| Mar 1995 | 1 | 1 |
| Apr 1995 | 1 | 2 |
| Jun 1995 | 3 | 5 |
| Sep 1995 | 1 | 6 |
| Dec 1995 | 1 | 7 |
| May 1996 | 1 | 8 |
| Nov 1996 | 1 | 9 |
| Jan 1997 | 1 | 10 |
| Mar 1997 | 1 | 11 |
| May 1998 | 1 | 12 |
| Oct 1998 | 2 | 14 |
| Aug 1999 | 1 | 15 |
| Mar 2002 | 1 | 16 |
| Jul 2002 | 1 | 17 |
| Jan 2005 | 1 | 18 |
| Mar 2010 | 1 | 19 |
What owners report
Complaints grouped by the component NHTSA recorded
- Seat belts1361.9%
- Driver assistance29.5%
- Engine29.5%
- Transmission29.5%
- Brakes14.8%
- Powertrain (other)14.8%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
2 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govSEAT BELTS:FRONT:WEBBING
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
TL*THE CONTACT OWNS A 1990 MAZDA 323. THE CONTACT STATED THAT THE VEHICLE EXPERIENCED UNINTENDED ACCELERATION AND WHENEVER THE VEHICLE IDLED EXCESSIVELY THE RPMS ALSO INCREASED. THE DEALER WAS NOTIFIED AND STATED THAT THERE WAS NOTHING THAT THEY COULD DO. THE DEALER ALSO TOLD HIM TO CONTACT THE MANUFACTURER FOR FURTHER INSTRUCTIONS. THERE WAS ONLY ONE DEALER IN HIS AREA WHICH IS NOT A CERTIFIED MAZDA DEALER. THE FAILURE MILEAGE WAS 97,000.
- NHTSA ID
- 10316723
- Incident
- Mar 4, 2008
- Mileage
- 97,000 mi
THE DRIVER WAS SITTING AT AN INTERSECTION WITHOUT WARNING ANOTHER VEHICLE REAR ENDED THE VEHICLE IN FRONT. THE LEFT SIDE AND RIGHT SIDE SEAT BELTS DISENGAGED ON THEIR OWN,THE SEAT BELTS RETRACTOR WAS NOT RETRACTABLE. NO INJURIES TO REPORT. THE DRIVER WAS ABLE TO DRIVE TO THE DEALER FOR INSPECTION, AND MECHANIC DETERMINED THAT THE SEAT BELTS NEEDED TO BE REPLACED. *AK
- NHTSA ID
- 10107219
- Incident
- Jan 11, 2005
CONSUMER STATES DEALER TOLD HER THAT THEY WERE NOT GOING TO ACCEPT HER RECALL NOTICE BECAUSE CAR WAS TO OLD AND SEAT BELT WILL NOT STICK.*JB
- NHTSA ID
- 8014803
- Incident
- Jul 8, 2002
WHEN CLOSING DOOR SEAT BELT DOES NOT RETRACT. CAN HEAR CLICKING SOUND, BUT SEATBELT DOES NOT GO BACK IN. DEALER CONTACTED. *AK
- NHTSA ID
- 8005185
- Incident
- Jan 15, 2002
MOTOR BELT/SHOULDER FAILED PRIOR TO RECALL NOTICE, DURING RECALL REPAIR EXTRA CHARGES DUE TO PARTS NOT INCLUDED IN RECALL NOTICE.(97V-211) MJS
- NHTSA ID
- 548028
- Incident
- May 28, 1996
AUTOMATIC TRANSMISSION FAILURE. AW
- NHTSA ID
- 781067
- Incident
- Aug 8, 1998
INTERMITTENTLY THE FRONT SEAT BELTS RETRACT BACK AND FORTH ON THEIR OWN. MANUFACTURER WAS NOTIFIED. *AK
- NHTSA ID
- 828748
- Incident
- Mar 1, 1998
RECALL # 97V211000, SHOULDER BELTS; WHEN OWNER ARRIVED FOR SCHEDULED APPOINTMENT HE WAS INFORMED THAT PARTS WERE NOT AVAILABLE TO CORRECT RECALL. OWNER HAS CONTACTED DEALER ON (3) OTHER OCCASIONS. THE DEALER IS NOT ABLE TO TELL OWNER WHEN PARTS WILL BE AVAILABLE. *AK
- NHTSA ID
- 823208
- Incident
- Apr 2, 1998
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ENGINE AND ENGINE COOLING; EQUIPMENT; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
EQUIPMENT; VEHICLE SPEED CONTROL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
VEHICLE SPEED CONTROL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER
Speedometer replacement procedure
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.