ELECTRICAL SYSTEM:IGNITION:SWITCH
1992 Mazda 323
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 15 NHTSA owner-reported complaints for the 1992 Mazda 323, most frequently naming the seat belts, electrical and engine categories. 2 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 24 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
View as table
| Month | Complaints filed | Cumulative |
|---|---|---|
| Apr 1995 | 2 | 2 |
| Jun 1995 | 1 | 3 |
| Jan 1996 | 1 | 4 |
| Mar 1996 | 1 | 5 |
| Jun 1996 | 1 | 6 |
| Aug 1996 | 1 | 7 |
| May 1997 | 1 | 8 |
| Jan 1998 | 1 | 9 |
| Dec 1998 | 1 | 10 |
| Sep 1999 | 1 | 11 |
| Jul 2000 | 1 | 12 |
| Oct 2000 | 1 | 13 |
| Jul 2001 | 1 | 14 |
| Jul 2002 | 1 | 15 |
What owners report
Complaints grouped by the component NHTSA recorded
- Seat belts1275.0%
- Electrical16.3%
- Engine16.3%
- Interior & seats16.3%
- Steering16.3%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
2 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govSEAT BELTS:FRONT:WEBBING
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
DRIVER'S SIDE SEATBELT BUCKLE WILL NOT STAY LATCHED. DEALER NOTIFIED. *AK THE CONSUMER STATES THAT THE PASSENGER SIDE SEAT BELT DOES NOT WORK PROPERLY AND THE DRIVER SIDE SEAT BELT DOES NOT WORK AND IS OF TRACK, WITH A WIRE EXPOSED. (ABLE TO USE BOTH LAP BELTS, BUT THE AUTOMATIC PART WHICH GOES ACROSS THE CHEST ARE INOPERABLE) THE MOTOR RUNS CONSTANTLY ON THE DRIVER'S SIDE, WHEN THE KEY IS IN THE IGNITION. *SCC
- NHTSA ID
- 8014871
- Incident
- Jun 28, 2002
DRIVER'S SEATBELT STOPPED WORKING, STUCK IN TRACK. *AK
- NHTSA ID
- 892017
- Incident
- Jul 2, 2001
SEATBELT RAIL WAS FAULTY PER RECALL NOTICE 97V-211 AND THERE WERE NO PARTS AVAILABLE, THE DEALER HAS NOT BEEN ABLE TO REMEDY THE DEFECT WITHIN A REASONABLE AMOUNT OF TIME. NLM
- NHTSA ID
- 556482
- Incident
- Jul 26, 1999
INTERMITTLEY DRIVER SHOULDER BELT LOCKS UP WHILE IN USE WHICH CAUSES THE DRIVER NOT ABLE TO MOVE SAFETY, AND MAY RESULT A LOSS OF VEHICLE CONTROL. RETRACTOR IS BROKEN AND NEED TO REPLACE. PLEASE PROVIDE FURTHER INFORMATION.*AK
- NHTSA ID
- 865023
SEAT BELT RESTRAINTS OFTEN DO NOT RETRACT UPON OPENING OF DOOR,ONCE IT RETRACTED SO TIGHTLY ON MY SON I HAD A VERY DIFFICULT TIME GETTING HIM OUT. ALSO THE SEAT BELT WARNING LIGHT GOES OFF INTERMITTANTLY EVEN THOUGH WE ARE PROPERLY BELTED. I DO NOT TRUST THESE BELTS TO KEEP US SAFE IN AN ACCIDENT.
- NHTSA ID
- 712180
- Incident
- Jul 10, 1999
ONGOING PROBLEM WITH SEAT BELT BUZZER GOING OFF. CONSUMER HAD REPAIRS DONE APPROXIMATELY TWO YEAR AGO, AND PROBLEM REOCCURRED AGAIN. DEALER/MFR. NOTIFIED AND REFUSED TO REPAIR UNLESS COST GOES TO CONSUMER. *AK
- NHTSA ID
- 832904
- Incident
- Jun 1, 1998
GREAT CAR, NEVER SPENT A DIME ON IT.
- NHTSA ID
- 528353
EA94039, THE DRIVER'S SIDE SEAT BELT IS STUCK IN THE RETRACTOR IN THE FORWARD POSITION. THE PROBLEM HAS NOT BEEN CORRECTED. *AK
- NHTSA ID
- 811959
- Incident
- May 1, 1997
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ENGINE AND ENGINE COOLING; EQUIPMENT; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
EQUIPMENT; VEHICLE SPEED CONTROL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
VEHICLE SPEED CONTROL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER
Speedometer replacement procedure
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.