RoadVitals

1993 Mazda 323

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
10
Latest Mar 4, 2008
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Oct 19, 2015
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 10 NHTSA owner-reported complaints for the 1993 Mazda 323, most frequently naming the seat belts, body & structure and transmission categories. 2 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 24 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Seat belts640.0%
  • Body & structure213.3%
  • Transmission213.3%
  • Engine16.7%
  • Interior & seats16.7%
  • Other / unspecified16.7%
  • Brakes16.7%
  • Electrical16.7%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
15V674000

ELECTRICAL SYSTEM:IGNITION:SWITCH

Oct 19, 2015
1,368,500 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
The risk: If the ignition switch overheats there would be an increased risk of a fire.
The remedy: Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
Mazda North American OperationsManufacturer number 8715JView on NHTSA.gov
97V211000

SEAT BELTS:FRONT:WEBBING

Nov 18, 1997
134,000 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH FRONT SEAT AUTOMATIC SHOULDER BELTS. THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY CAN BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE.
The risk: A SEAT OCCUPANT MAY NOT BE PROPERLY RESTRAINED IN THE EVENT OF A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE PASSIVE SHOULDER BELT ASSEMBLY WITH A MODIFIED ONE (WITH ADDITIONAL DUST LIP) IN VEHICLES WHICH HAVE EXPERIENCED A PROBLEM. IN VEHICLES IN WHICH THE AUTOMATIC SHOULDER BELT FUNCTIONS PROPERLY, THE RAILS WILL BE INSPECTED AND REPLACED WITH MODIFIED RAILS IF THEY EXCEED THE INSPECTION CRITERIA.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

EA94039ClosedEngineering Analysis

AUTO RESTRAINT SYSTEM FAIL

Opened Nov 30, 1994
Closed Nov 26, 1997

There is no summary currently available

SEAT BELTSLed to recall 97V211000

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

View all 10
Brakes
Filed Mar 4, 2008

TL*THE CONTACT OWNS A 1993 MAZDA 323. THE CONTACT DROVE A LONG DISTANCE WITHOUT REALIZING THAT THE PARKING BRAKE WAS APPLIED. SHE BELIEVED THAT THERE WAS FAILURE WITH THE INSTRUMENT PANEL THAT DID NOT INDICATE THE PARKING BRAKE WAS APPLIED. THE CONTACT SPOKE WITH MAZDA AND THEY OFFERED NO ASSISTANCE. THE VIN, PURCHASE DATE, ENGINE SIZE, NUMBER OF CYLINDERS, POWERTRAIN, SPEED, AND FAILURE MILEAGE WERE UNKNOWN. THE CURRENT MILEAGE WAS 275,000. UPDATED 03/18/08. *LJ UPDATED 03/18/08 *TR

NHTSA ID
10220075
Incident
Feb 29, 2008
Body & structureInterior & seatsSeat belts
Filed Apr 15, 2002

CONSUMER RECEIVED A RECALL NOTICE, BUT PROBLEM STILL EXISTS, DRIVERSIDE SEATBELT WILL NOT LOCK AT ALL, ALSO DRIVER'S SIDE SEATBELT WILL NOT CLOSE ON SHOULDER HARNESS, DEALERSHIP IS AWARE OF PROBLEM.*AK. CONSUMER STATED THE PASSENGER SIDE SHOULDER HARNESS WILL NOT RETRACT TO SECURE THE PASSENGER IN THE VEHICLE, THE VEHICLE WAS TAKEN TO THE DEALERSHIP TWICE, ALSO THE FRONT DOOR LATCH SWITCH WAS REPLACED, ALSO THE LAP BELT MOTORS ARE NOT RETRACTING, THE BELT OR SHOULDER BELT MOTOR ARE NOT TIGHTENING.

NHTSA ID
8007673
Incident
Jan 1, 2001
Seat belts
Filed Dec 23, 1999

PASSIVE SHOULDER RESTRAINT ON DRIVER'S SIDE WILL NOT RETRACT WHEN CAR IS STARTED. THE CABLE APPEARS TO HAVE COME OFF ITS TRACT AND IS HANGING LOOSE. I HAVE ALSO EXPERIENCED INTERMITTENT PROBLEMS WITH THE PASSIVE RESTRAINT ON THE PASSENGER SIDE.

NHTSA ID
716388
Incident
Dec 23, 1999
Body & structureEngineOther / unspecified+1 more
Filed Oct 5, 1999

TRANSMISSION LEAKING CAUSING VIBRATION AT IDLE,JERKING AND HESITATION. NLM

NHTSA ID
548905
Transmission
Filed Nov 16, 1998

INTERMITTENTLY WHILE DRIVING VEHICLE CHOKES UP, DOES GO INTO REVERSE OR FORWARD. DEALER AND MANUFACTURER HAVE BEEN NOTIFIED. *AK

NHTSA ID
828871
Incident
Oct 15, 1998
Electrical
Filed Aug 18, 1997

ABRUPT/CATASTROPHIC ENGINE SYSTEM FAILURE. VEHICLE SHUTDOWN. WILL NOT RESTART.AD VEHICLE TOWED TO DEALER AND DEALER DID NOT KNOW CAUSE OF PROBLEM. THINKS, HOWEVER, IT IS THE ELECTRONIC CONTROL MODULE. MANUFACTURER/DEALER STALLING REPAIRS. *AK

NHTSA ID
809536
Incident
Feb 27, 1997
Seat belts
Filed Jul 17, 1996

WHEN LEFT FRONT PASSIVE SHOULDER BELT ENGAGES, THE BELT TIGHTENS/CRUSHES YOUR CHEST. *SD

NHTSA ID
506482
Incident
Jul 17, 1996
Seat belts
Filed Dec 1, 1995

DRIVERS SIDE PASSIVE RESTRAINT WILL TIGHTEN WHEN USED W/NO WARNING. PLEASE DESCRIBE DETAILS. TT

NHTSA ID
975869

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

00-003-19-3583

ENGINE AND ENGINE COOLING; EQUIPMENT; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE

In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.

09-009-19-3566

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-034-18-3430a

EQUIPMENT; VEHICLE SPEED CONTROL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-034-18-3430

VEHICLE SPEED CONTROL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-035-17-3080

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

0900716

ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER

Speedometer replacement procedure

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mazda 323 by model year
YearComplaintsRecallsInvestigationsIssue Index
2001000—
2000000—
1999000—
1998000—
1997000—
1996000—
1995410—
1994112151.0
1993Viewing102142.6
1992152157.6
1991202252.4
1990192261.4
1989381151.4
1988341151.2
1987800—
1986400—
1985000—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.