2014 Mazda CX-9

In an July 7,2015 letter to NHTSA, Mazda identified a safety defect that could result in lower ball joint separation in approximately 193,484 model year (MY) 2007 through 2014 Mazda CX-9 vehicles (NHTSA Recall No. 15V-451,Mazda 8515G).Mazda indicated that damage to the ball joint boot may allow water to enter the front suspension ball joint fitting during use which may result in premature ball joint wear and a progressively looser joint.In January 2014, Mazda implemented redesigned lower control arms in production vehicles to improve the durability of the lower ball joints.The redesign involved changing the shape of the top surface of the ball joint boot cover and adding a suspension plate to the undersurface of the knuckle.Mazda's recall will replace the defect lower control arms with the redesigned parts.ODI's analysis of information collected during PE15-022 identified a total of 62 ball joint separation incidents, including 34 identified in ODI complaints and 31 identified in Mazda complaints and field reports (3 of the Mazda records involve vehicles/incidents that were also reported to ODI).When Mazda's design change was implemented, most of the field experience related to lower ball joints involved complaints of noise and premature wear-out.Only 1 of the ODI and 6 of the additional Mazda separation complaints identified in ODI's analysis were reported prior to January 2014.Significant increases in the number and trend in separation complaints were observed in 2015, when 30 of the ODI complaints and 16 of the additional Mazda complaints were reported.The report trend appears to be accelerating, with 29 of the reports received after ODI opened PE15-022 on June 9, 2015.There has been one crash reported to ODI related to the alleged defect (VOQ 10746510). This investigation is closed based on Mazda's recall.The 34 VOQs associated with this investigation are: 10747358, 10746510, 10744897, 10743509, 10736229, 10735938, 10734763, 10734302, 10734290, 10733813, 10732578, 10732217, 10732154, 10731850, 10730736, 10730280, 10730143, 10730114, 10726622, 10726480 10726448, 10726168, 10725839, 10725567, 10725488, 10725427, 10725390, 10717510, 10714469, 10695142, 10668978, 10648429, 10640541, 10546535

The contact owns a 2014 Mazda CX-9. The contact stated while driving at various speeds, the vehicle was drifting to either side. There was no warning light illuminated. The contact had to forcefully grip the steering wheel to avoid losing control of vehicle. The vehicle was taken to an independent mechanic, and it was discovered that there was severe corrosion around the front suspension ball joints. Upon investigation, the contact discovered NHTSA Campaign Number: 15V451000 (Suspension); however, the VIN was not included in the recall. The dealer was notified of the failure and the contact was provided an estimate for a diagnostic test. The manufacturer was notified of the failure and the contact was provided a case number. The vehicle was not repaired. The failure mileage was approximately 95,000.

NHTSA ID

11626356

Incident

Aug 1, 2024

Mileage

95,000 mi

I purchased a 2014 Mazda CX-9 back in May of 2020 w/ roughly 60k on the dash. Literally 7 months later w/ about 72k on the dash, the day after Christmas I was driving to work (I worked in the next state over) on the highway my car just shut down. No warnings, no check engine lights NOTHING! It just completely shut off and would not turn on. Thankfully because of the holiday the highway was pretty empty and I was able to swing my car across the interstate so I wouldn’t get hit by oncoming traffic. After getting out and deciding to check my oil I noticed it looked milky. I had no idea what that meant so I had it towed to a Mazda dealership in the state I live in. It was going to cost me almost $8,000 to put in a new engine because the water pump that was placed inside of the engine failed, which in turn caused my engine to seize. The extended warranty I had on my vehicle was worthless so I ended up paying out of pocket. Thankfully Mazda worked with me and had me prove that I kept up maintenance on the truck so the price was chopped in half. This happened right at the beginning of Covid when the entire world was suffering financially. I still had to make my car payments on top of shelling out 4k on a truck I hadn’t even had for a year. This is a huge issue with a lot of people that own the same vehicle and is extremely dangerous! I could’ve killed someone or worse myself when my vehicle stalled out on the highway.

NHTSA ID

11597219

Incident

Dec 26, 2020

The water pump failed causing water to mix with the oil and damage the head gasket. Estimates recommend replacing engine. The service engine light came on and we took it to our trusted mechanic right away. Got the estimates from two mechanics for this repair and then towed the car to Mazda dealer who confirmed the problem. We wrote to Mazda's corporate office and was told they would not fix it. My car has 68,000 miles and was regularly serviced. It is currently sitting dead in my garage. We bought this car in 2015 brand new from the Mazda dealer in Monroeville, PA. This is outrageous! I spoke with someone else who also owns a Mazda and the same thing happened to his car. From articles I have read and attached, this problem is occurring in many Mazdas. What needs to be in place for Mazda to take responsibility and fix this problem by recalling the affected vehicles?

NHTSA ID

11576989

Incident

Oct 10, 2023

Brakes stopped working while we were on vacation. Made the drive down fine, but the next day went to drive the car, pressed the brakes and the car did not come to a complete stop. Also made a funny noise when we tried to press on the brakes. My husband practically had to stand up and push all the way down to get car to stop. Luckily we were not in a congested or confined place. Ended up replacing the brake booster. Three weeks later my acceleration stopped working intermittently. I go to press the gas and the car doesn’t go. The dealership is saying it’s the brake signal.

NHTSA ID

11538158

Incident

Jun 26, 2023

Water pump failed and ruined the engine. There was little to no warning.

NHTSA ID

11538157

Incident

Mar 25, 2022

Breaks became very hard to press and I was having trouble stopping the car. I could not drive it to the Mazda dealer who was too far. I took a chance and drove a few miles to local break shop. They replaced the master cylinder and the break booster. Parts and labor were $1083.87

NHTSA ID

11533482

Incident

Jul 20, 2023

When I press on my brakes, I hear air. I am fortunate that, as of this reporting, I have not had an accident. My brakes do not fully stop my car, so I have to judge when to brake in order to slow down and not hit the car ahead of me. Very scary when your car won't stop! I have read other complaints on the Mazda CX9s built in 2013 having an issue with the brake booster. PLEASE recall these 2014 Mazdas so the appropriate repairs can be made. Working brakes are ESSENTIAL!

NHTSA ID

11531431

Incident

Jul 10, 2023

I bought a vehicle from Carvana 11/2021 with not quite 59k on it. On 6/21/2023, with 77K miles, my car had a catastrophic engine failure. I was driving my grandchildren ages, 3-12 years of age home. Safety was definitely at risk with speeds of 70 freeway were completed right before engine stopping. The mechanic shop has confirmed the car giving 3 codes related to timing belt/water pump and the other code which confirms engine failure. No warning lights had come on until I tried to restart it. Since this situation is most recent, I have not had anyone else inspect the vehicle. I am working through my options and will take recommendations for resolution.

NHTSA ID

11528675

Incident

Jun 21, 2023

This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-061/25 12/17/25 DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Devices plugged into the 12V outlet 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay™/ Android Auto™ will not connect) 6. Over-sized wheels/tires (incorrect GPS location) 7. DTC C0023:14 8. Decorative trim and/or cover on the START/STOP ENGINE button Example 1: Some electrical devices connected to the DLC-2 connector by insurance or mobile phone companies may cause: Battery discharge. The device may disrupt the CAN system battery saver mode. • IDS/MMDS will not communicate with the vehicle due to poor DLC-2 connection. The aftermarket device may cause DLC-2 female terminals to spread open.

This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. SCHEDULED MAINTENANCE Refer to the applicable Workshop Manual or Owner's Manual for vehicle -specific manufacturer scheduled maintenance. Workshop Manual - Refer to section 00-00 SCHEDULED MAINTENANCE. Owner's Manual - Refer to section 8 Maintenance and Care. b. Note: Please refer to the information below outlining the services not included in Mazda's Factory Scheduled Maintenance: IMPORTANT: Recommending fluid flushes when not necessary can lead to customer confusion and dissatisfaction. Fluid flushing for preventive maintenance purposes is strongly discouraged, unless otherwise specified in a published procedure (Owner’s Manual, Workshop Manual, Technical Service Bulletin, etc.).

If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.

A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. “Mazda Air Cooling Coil Coating” is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years. NOTE: See parts information for Mazda Air Cooling Coil Coating and Kit part numbers.

Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. If a structure's windows create enough of a curve, the concave glass can focus the sun's rays onto a small area and acting like magnifiying glass direct the sunbeams into a hot pinpoint of light. This magnifcation of the sun's rays can cause damage to vehicle trim (see examples). Additional information and exemplar images regarding this phenomenon can be found by performing a google search.

When replacing the SiriusXM satellite radio unit, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as soon as possible to ensure the customer leaves the dealership with an active SAT radio.