2001 Mazda Tribute

In a letter dated July 25, 2012 Ford Motor Company (Ford) submitted a Defect Information Report (DIR), NHTSA Recall No. 12V-353 to NHTSA identifying a safety defect involving inadequate clearance between the engine cover and the speed control cable connector, which could result in a stuck throttle condition.The vehicles involved are model year (MY) 2001 through MY 2004 Ford Escape vehicles equipped with 3.0L V6 engines and speed (cruise) control.A redesigned engine cover was implemented in production beginning in MY 2005, which provided additional clearance of the speed control cable to the engine cover.Similarly on July 26, 2012 Mazda North American Operations (Mazda) on behalf of Mazda Motor Corporation of Hiroshima, Japan submitted a DIR to NHTSA, NHTSA Recall No. 12V-357, identifying the safety defect described above in MY 2001 through MY 2006 and MY 2008 Mazda Tribute vehicles (no Tribute vehicles were produced in MY 2007) equipped with 3.0L V6 engines and speed control.Unlike the Ford Escape recall scope, the Mazda Tribute scope is broader as Mazda Tribute vehicles incorporated a similar engine cover design as related to the clearance to the speed control cable in MYs 2001 through 2006 and MY 2008.The failure report summary above reflects reports identified by ODI in review of data submitted to the Office of Defects Investigation (ODI) and reports submitted to Ford and to Mazda.ODI identified 44 reports likely related to the safety defect described in the DIRs; 39 involving Ford Escape vehicles and 5 involving Mazda Tribute vehicles. This Preliminary Evaluation is closed.The ODI report cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10116267, 10128545, 10128681, 10137520, 10153327, 10165007, 10199728, 10234846, 10335779, 10466261, and 10468307.

On July 8, 2012, The Center for Auto Safety has petitioned NHTSA to open defect investigations on Model Year (MY) 2002 ? 2004 Ford Escape and Mazda Tribute vehicles with certain cruise control cables.The Center for Auto Safety has also petitioned for a hearing to address whether Ford Motor Company (Ford) and Mazda North American Operations (Mazda) met their obligations to notify owners and correct a defect in certain Ford Escape and Mazda Tribute vehicles.The petitions to open investigations are denied as unnecessary and the petitions to conduct hearingsare denied.ODI IDs referenced above are: 10109921, 10116267, 10116574,10121108, 10125928, 10128545, 10130133,10137520, 10153327, 10155295, 10155817, 10159048, 10164205, 10165007, 10177337, 10184382, 10195378,10199728, 10201424, 10203178, 10204179, 10207677, 10214472, 10218668, 10222869, 10229600, 10255417,10256387, 10258046, 10259777, 10260591, 10266150, 10273613, 10291508, 10303282, 10303434, 10316154,10321828, 10323339, 10325817, 10331278, 10334038, 10335779, 10341773, 10342450, 10345004, 10363982,10370338, 10379444, 10432635, 10451652, 10466261, 891605, 10053779, 10125132, 10146998, 10149101,10160004, 10161052, 10170988, 10178811, 10204780, 10215610, 10222996, 10239609, 10252790, 10253666,10262773, 10264280, 10280669, 10289784, 10294932, 10312464, 10316440, 10343662, 10354530, 10413665,10461195

Ford and Mazda recalled model year (MY) 2001 through 2004 Ford Escape (07V-156) and Mazda Tribute (07V-157) vehicles due to non-crash fires or non-fire thermal events originating in the engine compartment at or near the ABS control module.Approximately 545,700 vehicles were subject to the initial safety recalls and approximately 424,700 vehicles were serviced under those campaigns. The campaigns addressed potentially damaged, missing or misplaced seals in the ABS control module wiring harness electrical connector that could allow brake fluid to enter the connector, possibly resulting in corrosion, short-circuit, melting, smoke and/or fire.Since the recall, the agency is aware of 260 subject vehicles that have reportedly experienced non-crash fires or non-fire thermal events originating at or near the ABS control module in vehicles some time after being serviced under the campaign. The post-recall repair incident rates for MY 2001 and 2002 subject vehicles are 90.9 and 126.7 (normalized per 100,000 vehicles serviced under the recall campaigns), respectively.These rates are much higher than the post-recall repair incident rate for MY 2003 and 2004 subject vehicles, which are 5.0 and 3.7 per 100K, respectively.Similarly, the post-recall repair key-off fire incident rates in the MY 2001 and 2002 subject vehicles is 54.3 per 100K, compared to 0.5 per 100K for the MY 2003 and 2004 subject vehicles.The agency is aware of 12 key-off fire incidents, all involving MY 2001 and 2002 subject vehicles, where the vehicle was parked inside a structure when the fire started.In five of those incidents, the fire spread from the vehicle to the structure itself.Ford has identified the brake master cylinder reservoir cap in certain MY 2001 and 2002 subject vehicles as a potential source for brake fluid leaks that could affect ABS module connector integrity.The reservoir caps used on the MY 2003 and 2004 subject vehicles are reportedly an improved design from those used on the earlier models.By letter dated January 4, 2012, Ford notified the agency that it would conduct another safety recall (identified by NTHSA Recall No. 12V-005 and Ford Recall No. 11S24) of certain MY 2001 and 2002 Ford Escape vehicles to perform a more thorough remedy to address the risk of fire originating at the ABS control module.In addition to double-checking the ABS control module wiring harness electrical connector weather seal (which should have been addressed under the previous recall campaign), Ford will replace brake master cylinder reservoir caps to address the leaking cap problem and reduce the risk of brake fluid entering the subject electrical connector.Ford will also modify the electrical system such that the ABS control module is de-energized when the ignition key is switched off to further reduce the risk of an unattended vehicle fire in units that may have sustained some small loss of connector integrity that may not be evident upon visual examination.Similarly, Mazda notified the agency by letter dated January 19, 2012, that it would also conduct a safety recall (identified by NTHSA Recall No. 12V-016 and Mazda Recall No. 6712A) of certain MY 2001 and 2002 Mazda Tribute vehicles.Ford estimates repair parts will be available beginning the second quarter of 2012. Until recall repairs are made both Ford and Mazda are advising owners of affected vehicles to reduce the safety concern by parking their vehicles outdoors away from structures to prevent a potential fire from spreading.Accordingly, this investigation is closed.

IN LETTERS DATED MARCH 30, 2007, FORD MOTOR COMPANY (FORD) AND MAZDA NORTH AMERICAN OPERATIONS (MAZDA) NOTIFIED THE AGENCY THAT THEY WILL CONDUCT RECALLS 07V-156 AND 07V-157, RESPECTIVELY, TO REMEDY A SAFETY DEFECT THAT MAY RESULT IN FIRE IN A WIRING CONNECTOR USED IN CERTAIN MODEL YEAR (MY) 2001-2004 FORD ESCAPE AND MAZDA TRIBUTE VEHICLES EQUIPPED WITH ABS.THE RECALL CAMPAIGN PRESCRIBES AN INSPECTION OF THE SUBJECT COMPONENTS, WHICH SHALL BE REPAIRED OR REPLACED ONLY IF NECESSARY.IF THE SUBJECT VEHICLE PASSES THE VISUAL INSPECTION THEN THE RECALL INSTRUCTS THE TECHNICIAN TO APPLY ELECTRICAL GREASE (FORD PART NUMBER XG-12) TO THE ABS MODULE CONNECTOR AND VERIFY SYSTEM OPERATION.TO DATE, APPROXIMATELY 388,500 SUBJECT VEHICLES (71.7% OF THE TOTAL RECALL POPULATION) HAVE BEEN SERVICED UNDER THE RECALL CAMPAIGN, THE VAST MAJORITY OF WHICH (373,985) PASSED THE VISUAL INSPECTION AND RECEIVED ONLY THE ELECTRICAL GREASE APPLIED TO THE ABS MODULE CONNECTOR. THE AGENCY IS AWARE OF AT LEAST 86 UNIQUE SUBJECT VEHICLES THAT HAVE REPORTEDLY EXPERIENCED NON-CRASH FIRE INCIDENTS ORIGINATING IN THE ENGINE COMPARTMENT AT OR NEAR THE ABS CONTROL MODULE SOME TIME AFTER THE VEHICLE WAS SERVICED UNDER THE SUBJECT RECALL.THE MANUFACTURER HAS PROVIDED SOME INFORMATION THAT INDICATES CERTAIN VEHICLES WERE IMPROPERLY SERVICED UNDER THE SUBJECT RECALL AS EVIDENCED BY THE FACTORY WIRE TIE-WRAP NOT BEING REMOVED FROM THE WIRING HARNESS (WHICH INDICATES A PROPER INSPECTION COULD NOT HAVE BEEN PERFORMED) AND BY INCORRECT GREASE BEING APPLIED, INCORRECT AMOUNTS OF GREASE, AND EVEN INSTANCES WHERE NO GREASE WAS APPLIED TO THE ABS MODULE CONNECTOR.ALSO, THERE REMAIN SOME QUESTIONS REGARDING THE SEVERITY OF THE REPORTED FIRE INCIDENTS.THE MANUFACTURER CONTENDS THAT MOST REPORTED FIRES WERE ACTUALLY NON-FIRE THERMAL EVENTS WITH DAMAGE LIMITED TO THE SUBJECT COMPONENTS AND THAT MOST VEHICLES ARE REPAIRED AND RETURNED TO SERVICE.HOWEVER, THE TREND APPEARS TO BE ONGOING WITH 5 REPORTED INCIDENTS HAVING OCCURRED IN THE PAST 6 MONTHS.ACCORDINGLY, THIS RECALL QUERY HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS TO FURTHER ASSESS THE EFFECTIVENESS OF THE RECALL REMEDY.

Corroded Subframe led to almost complete separation of drivers side control arm, 72k original miles, took my problem to Bergery Mazda where no one cared. If the part was already replaced in 2014 how is it possibly broken already.

NHTSA ID

11604380

Incident

Jul 24, 2023

The contact owns a 2001 Mazda Tribute. The contact stated that while the vehicle was idling and occasionally while attempting to accelerate, the vehicle would stall with the check engine warning light illuminated. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that the ECM needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referenced an unknown recall that had since been expired. The failure mileage was 132,923.

NHTSA ID

11457256

Incident

Oct 18, 2021

Mileage

132,923 mi

THE GAS PEDAL IS THE ISSUE THAT I HAVE WITH MY 2001 MAZDA TRIBUTE YOU CAN HARDLY PUSH THE GAS PEDAL AND IT ACCELERATES VERY HARD. IT IS VERY NON SAFE. WHAT CAN BE DONE. THIS SHOULD BE A RECALL ON THIS PROBLEM.

NHTSA ID

11390066

Incident

Dec 14, 2020

POOR BRAKING. POOR PEDAL RESPONSE. LONG STOPPING DISTANCE. BRAKES CHECKED AS GOOD. DEALER SAYS NO RECALLS OPEN FOR MY VIN

NHTSA ID

11318241

Incident

Mar 15, 2020

Mileage

185,000 mi

I WENT IN THE STORE FOR A FEW MINUTES AND I CAN OUT AND THE CAR WOULD NOT SHIFT INTO GEAR AT ALL IT SHIFTED OUT OF PARK AND ALL IT DID WAS THE SHIFTER JUST STOPPED AND WAS LOOSE IT WOULD NOT INGAGE IN ANOTHER GEAR

NHTSA ID

11315447

Incident

Mar 1, 2020

Mileage

140,000 mi

THE THROTTLE WILL STICK OPEN. IT HAPPENS TYPICALLY IN THE WINTER WHEN IT'S REALLY COLD BUT LATELY, IT HAS BEEN HAPPENING WHEN IT'S WARM OUT. IN ORDER FOR ME TO GET CONTROL OF THE VEHICLE I HAVE TO QUICKLY SHIFT IT INTO NEUTRAL AND POWER OFF THE VEHICLE AND COAST TO A STOP. IF I DO NOT SHUT THE POWER OFF THE MOTOR RACES AND SOUNDS LIKE IT IS GOING TO BLOW UP.

NHTSA ID

11255385

Incident

May 1, 2019

Mileage

230,000 mi

TL* THE CONTACT OWNS A 2001 MAZDA TRIBUTE. WHILE DRIVING 55 MPH, THE VEHICLE STALLED WITHOUT WARNING. IN ADDITION, THE CRUISE CONTROL FAILED. THE CONTACT WAS ABLE TO COAST THE VEHICLE TO THE SIDE OF THE ROAD AND POWERED OFF THE ENGINE. THE VEHICLE WAS RESTARTED, BUT FAILED TO DRIVE. THE VEHICLE WAS TAKEN TO THE RESIDENCE WHERE THE CONTACT WAS STAYING. THE VEHICLE WAS NOT TAKEN TO A DEALER OR AN INDEPENDENT MECHANIC FOR DIAGNOSTIC TESTING. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 211,000.

NHTSA ID

11182417

Incident

Feb 19, 2019

Mileage

211,000 mi

SUBFRAME RUST,LOWER ARMS CANOT BE CHANGED.I WAS DRIVING AND I HEARD POP AND COULDN"T KEEP THE CAR DRIVING STRAIGHT

NHTSA ID

11156991

Incident

Dec 2, 2018

Mileage

78,500 mi

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the “Speedometer Replacement Label”. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda’s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO’s services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.

Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.

Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.

Speedometer replacement procedure

Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.