2009 Mercury Mountaineer

The contact owns a 2009 Mercury Mountaineer. The contact stated while making a left or right turn, she heard an abnormal noise, and the steering wheel became difficult to turn. The contact stated that the Roll Stability Control (RSC) warning light was illuminated. The contact took the vehicle to the local dealer, where it was diagnosed with needing the Roll Stability Control (RSC) to be replaced. The vehicle was repaired but continued to experience the failure. The manufacturer had not been informed of the failure. The failure mileage was approximately 118,000.

NHTSA ID

11493929

Incident

Apr 1, 2022

Mileage

118,000 mi

MUFFLER. STILL HAS BAFFLES AND DAMPERS. CATALYTIC CONVERTER IS STILL ATTACHED. NOT LOUD OR OBNOXIOUS. DUE TO HAVING A 3IN IN DIAMETER TAIL PIPE. I WAS FAILED. I WAS APPROVED FOR THE LAST 8 YEARS AT DIFFERENT LOCATIONS. THESE NEW STRICT RESTRICTIONS ARE COSTING CONSUMERS UNNECESSARY COSTS. THIS WAS AN UNFAIR FAILURE THAT WAS POSTED AS A SAFETY ISSUE WHEN IT IS CLEARLY NOT. SUV WAS STATIONARY AND PASSED ALL OVER REQUIREMENTS. THIS WAS A JUDGEMENT CALL BY TYRE TRAK IN SPRINGFIELD.

NHTSA ID

11076059

Incident

Mar 2, 2018

TL*THE CONTACT OWNS A 2009 MERCURY MOUNTAINEER. THE CONTACT STATED THAT WHEN THE KEY WAS INSERTED IN THE IGNITION SWITCH TO START THE VEHICLE, THE POWER SEAT FAILED TO MOVE FORWARD FROM THE EASY EXIT POSITION. THE CONTACT STATED THAT THE POWER SEAT WOULD ALSO MOVE BACKWARDS IN A POSITION THAT PREVENTED THE CONTACT FROM REACHING THE BRAKE PEDAL. IN ADDITION, THE AIR BAG WARNING INDICATOR ILLUMINATED WHEN THE FAILURE OCCURRED. THE FAILURE RECURRED ON SEVERAL OCCASIONS. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 45,000. UPDATED 5/28/15 *TA THE CONSUMER STATED THE SEAT DID MOVE FORWARD FROM EASY EXIT, BUT IMMEDIATELY OR WHEN STARTING VEHICLE RETURNED TO EASY EXIT. THE DEALER DIAGNOSED THE FAILURE AS A WEAK BATTERY. VEHICLE WAS REPAIRED. UPDATED 9/17/2015*JS

NHTSA ID

10701469

Incident

Sep 1, 2014

Mileage

45,000 mi

HAVE A 2009 MERCURY MOUNTAINEER WITH 71,000 MILES. IN THE PAST 10 DAYS, HAVE HAD FOUR INCIDENTS WHERE, WHILE DRIVING, THE DRIVER'S SIDE POWER FRONT SEAT HAS SUDDENLY REVERTED TO THE EASY EXIT POSITION. WE BOUGHT THIS CAR USED WITH 22,000 MILES. HAVE HAD THE CAR FOR FOUR YEARS. MY WIFE AND I ARE TALL; HOWEVER, EVEN AT THAT, WHILE DRIVING AT SPEEDS BETWEEN 55-70 (ON TURNPIKES AND MAJOR HIGHWAYS), THIS IS STILL AN ISSUE. TOOK CAR TO A FORD DEALER IN READING, PA - ON A SATURDAY (MAYBE THEY DON'T DO AS MUCH INTENSIVE DIAGNOSTICS ON WEEKENDS?) RECENTLY WHO FOUND NO ISSUES ALTHOUGH THEY INDICATED OTHER MOUNTAINEERS OF THE 2002 OR 2005 MODELS HAD SIMILAR ISSUES AND IT APPEARED TO BE AN PROBLEM WITH THE IGNITION SWITCH. DID NOT GET THE IGNITION REPLACED BUT THE SEAT MOVED AGAIN TODAY WHILE MY WIFE DROVE THE CAR. WILL GO BACK TO THE FORD DEALER DURING THE WEEK TO GET MORE INTENSIVE DIAGNOSTICS. *JS

NHTSA ID

10592417

Incident

May 9, 2014

Mileage

71,000 mi

TL* THE CONTACT OWNS A 2009 MERCURY MARINER. THE CONTACT STATED THAT WHILE DRIVING 60 MPH, THE VEHICLE STALLED AND THE WARNING LIGHTS ILLUMINATED. THE CONTACT HAD TO SHIFT TO PARK AND RESTART VEHICLE TO RESOLVE THE FAILURE. THE VEHICLE WAS TAKEN TO THE DEALER WHO DETERMINED THAT THE THROTTLE POSITION SENSOR HAD FAILED. THE THROTTLE POSITION SENSOR WAS REPLACED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE AND CURRENT MILEAGE WAS 47,000.

NHTSA ID

10511893

Incident

May 10, 2013

Mileage

47,000 mi

TL*THE CONTACT OWNS A 2009 MERCURY MOUNTAINEER. THE CONTACT STATED THAT WHEN HE ROCKED THE STEERING WHEEL BACK AND FORTH IT MADE A POPPING NOISE. THE CONTACT STATED THAT THE RACK AND PINION CAUSED THE FAILURE TO OCCUR. THE DEALER STATED THAT ALL OF THE FORD AND MERCURY VEHICLES FOR THAT YEAR AND MODEL WERE DESIGNED THE SAME WAY. THE DRIVER SIDE TIRE ON THE INSIDE ALSO BEGAN TO EXHIBIT ABNORMAL WEAR, WHICH THE OWNER STATED COULD ALSO BE THE RACK AND PINION OR THE TIE ROD. THE VIN WAS NOT AVAILABLE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE AND CURRENT MILEAGES WERE 22,000.

NHTSA ID

10353732

Incident

Apr 11, 2010

Mileage

22,000 mi

All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.

Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition

Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition

This SKU is a front upper ball joint. The Customer communication requested return of unsold inventory to inspect for ball studs with excessive rotational friction in the ball joint assembly. Excessive friction in the ball joint assembly may cause a perceptible increase in steering effort.

Various vehicles equipped with a 4.6L, 5.4L, 6.8L modular 3 valve engine built on or before 8-Jan-2016 may exhibit symptoms that may include upper end engine noise, rough running, misfire and/or engine damage. If diagnosis leads to only camshaft/camshaft roller follower(s) requiring replacement, replace all of the camshaft roller followers on both banks/cylinder heads with part number 3L3Z-6564-A, not just the faulty roller follower(s). When replacing the camshaft roller followers, refer to Workshop Manual (WSM), Section 303-01.

Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab  select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab  select Dealer Installed Accessory or Accessory Installation.