RoadVitals

2007 Oshkosh S-Series

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Mar 29, 2016
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Jul 2, 2007
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 1 NHTSA owner-reported complaint for the 2007 Oshkosh S-Series, most frequently naming the body & structure category. 1 safety recall has been issued covering this model year; and 8 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Body & structure1100.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov

PARKING BRAKE

Jul 2, 2007
1,755 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.
The risk: THIS COULD DELAY OR FAILURE IN APPLYING THE PARKING BRAKES WHICH COULD RESULT IN A VEHICLE ROLL AWAY, INCREASING THE RISK OF A CRASH.
The remedy: OSHKOSH IS WORKING WITH BENDIX TO REPAIR THESE VEHICLES (PLEASE SEE 07E-037). BENDIX WILL INSTALL A CHECK VALVE REPAIR KIT FOR THE AFFECTED SR-7 SPRING BRAKE MODULATING VALVE FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 19, 2007. OWNERS MAY CONTACT BENDIX AT 440-329-9000 AND OSHKOSH AT 1-920-235-9151.
OSHKOSH TRUCK CORPORATIONView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Body & structure
Filed Mar 29, 2016

TL* THE CONTACT OWNS A 2007 OSHKOSH S-SERIES. THE CONTACT NOTICED THAT THE FRAME WAS CRACKED ON THE VEHICLE. THE CONTACT WAS A CERTIFIED TECHNICIAN HOWEVER WAS UNABLE TO DIAGNOSE THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS UNKNOWN.

NHTSA ID
10852206
Incident
Feb 29, 2016

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

FDM-SVC-030

FUEL SYSTEM, OTHER:FUEL FILTER

This bulletin provides instruction for installing a hydraulic system charge pump filter.

FDM-TSIB-043

EQUIPMENT

This bulletin provides information on updating hydraulic hose clamping below the cab to match current production. Engineering recommends changing out the front STAUFF clamp using the following procedure. The second STAUFF clamp can be changed out using this procedure if desired.

FDM-SVC-002

EQUIPMENT

This bulletin provides instruction for replacing the water pump impeller due to corrosion. Oshkosh has received reports of non-working water pumps due to the pump impeller becoming corroded and seized, causing the pump not to spin. A new impeller made of an improved alloy was developed to eliminate corrosion issues.

FDM-TSIB-027

POWER TRAIN

This bulletin provides information for vehicle owners that have a Dana series 172 or 175 rear axle without a lubricant drain plug in the bottom of the axle housing.

FDM-TSIB-026

POWER TRAIN

This bulletin provides instruction for replacing the mixer pump PTO shaft, mixer pump input yoke, and mixer pump input yoke bearing U-bolts to the current production configuration. The new PTO shaft is larger with greaseable crosses and requires a new mixer pump input yoke and replacing the input yoke bearing U-bolts with bearing straps.

FDM-TSIB-025

EQUIPMENT

This bulletin provides instructions for bolting the water tank mounting feet to the water tank if the bonded feet become loose.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Oshkosh S-Series by model year
YearComplaintsRecallsInvestigationsIssue Index
2025010
2024020
2023010
2022050
2021070
2020070
2019060
2018030
2017020
2016030
2015040
2014050
2013030
2012020
2011000
2010000
2009000
2008010
2007Viewing110
2006020
2005020
2000110
1999010
1998010
1997010
1995010
1994010
1993010
1992010
1991020
1990010
1989010
1988020
1987020
1986020
1985030
1984040
1983030
1982010
1981010
1980010
1979010
1978010

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.