SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
2017 RAM 4500
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 4 NHTSA owner-reported complaints for the 2017 RAM 4500, most frequently naming the brakes, airbags and powertrain (other) categories. 7 safety recalls have been issued covering this model year; 2 NHTSA investigations name it; and 326 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
View as table
| Month | Complaints filed | Cumulative |
|---|---|---|
| Jan 2019 | 1 | 1 |
| Oct 2021 | 1 | 2 |
| Aug 2025 | 1 | 3 |
| May 2026 | 1 | 4 |
What owners report
Complaints grouped by the component NHTSA recorded
- Brakes233.3%
- Airbags116.7%
- Powertrain (other)116.7%
- Suspension116.7%
- Tires & wheels116.7%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
7 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govWHEELS:LUGS/NUTS/BOLTS/STUDS
ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:WIRING; VEHICLE SPEED CONTROL:CRUISE CONTROL
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.
Post Recall Remedy Brake Transmission Shift Interlock (BTSI) Failure
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models include 1500, 2500, 3500, 4500, and 5500 trucks equipped with a column mounted shift lever.The failures of the BTSI described in the VOQs occurred on vehicles that had all previously been repaired under recall 17V-821 or 18V-100.Both recalls address a potential condition which can cause the BTSI locking pin to become stuck allowing the transmission to be shifted out of Park without depressing the brake pedal and/or without having a key in the ignition.Shifting the transmission out of Park when not having the brake pedal depressed can result in a vehicle rollaway. ODI is opening this Recall Query (RQ) to review the effectiveness of the 17V-821 and 18V-100 recall remedies, understand the root cause of additional vehicle rollaway incidents, and identify any other possible root cause that may affect the performance of the BTSI system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
Front Driveshaft Failure
On December 12, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-017 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging failures of the front driveshaft and/or transfer case, resulting in conditions of 1) a loss of engine power, 2) loss of steering assist, 3) loss of foundation brakes, 4) unintended air bag deployment and 5) engine/cab fires from combustible fluids striking hot exhaust components. The VOQs involved model year (MY) 2015 through 2017 RAM 4500 and 5500 vehicles. ODI received information from the vehicle manufacturer [Fiat Chrysler Automobiles (FCA)] via information request letters dated February 28, 2020, and April 21,2020. Supplemental information was received on March 17, 2021. A review of the responsive manufacturer information, and related meetings and presentations, showed that the transfer case failures in 97.5% of the claims did not disable the vehicle. Since analysis showed that a failed driveshaft could result in catastrophic damage to the transfer case as well as other safety risks (i.e. steering/brake failures etc.), ODI shifted the investigation to focus only on the front driveshaft failures. The double cardan universal joint design requires maintenance lubrication within every 8000 miles. Despite an under-hood maintenance reminder label and professional servicing at both dealers and independent repair facilities, the driveshafts were often found to be unlubricated due to lack of awareness, difficulty of the operation or the lack of the special tools needed to perform the work. To increase the maintenance lubrication rates, in the summer of 2021, FCA launched a communications campaign, circulating awareness bulletins, training information, special tool options and instructional videos through more than a dozen channels covering both dealer and independent repair facilities. Additionally, in the fall of 2021, FCA mailed a VIN-specific letter to each registered owner reminding them of the maintenance needs, and also sent a special grease gun adapter to every FCA US dealer and fleet operator with an FCA US dealer code. Since January 2022,NHTSA has not received a complaint of front driveshaft failure due to lack of lubrication that can lead to failure conditions such as loss of engine power, loss of steering assist, loss of foundation brakes, unintended air bag deployment and engine/cab fires. This drop in complaints, the communications campaign launched by the manufacturer, and the absence of reports from the manufacturer, support the closing of this Preliminary Evaluation. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
See attached document for complaint.
- NHTSA ID
- 11740531
- Incident
- Mar 18, 2026
The contact owns a 2017 Ram 4500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
- NHTSA ID
- 11681459
- Incident
- Aug 18, 2025
The contact owns a 2017 RAM 4500. The contact stated while towing 3 vehicles and driving 60 mph, when the front of the vehicle began to vibrate. The contact stated no warning light was illuminated. The contact stated he continued driving but began to change to the right lane when he heard a loud abnormal noise coming from under the vehicle. The contact lost control of the vehicle and crashed into the ditch. The air bags did not deploy. The contact stated no one was injured or sought medical attention. No police report was filed. The vehicle was not drivable. The contact towed the vehicle to a local dealer, where it was diagnosed with needing the transfer case to be replaced. The vehicle was not repaired but was pending repairs. The manufacturer had been informed of the failure. The failure mileage was approximately 280,000.
- NHTSA ID
- 11437474
- Incident
- Jun 23, 2021
- Mileage
- 280,000 mi
TL* THE CONTACT OWNS A 2017 RAM 4500. WHILE DRIVING VARIOUS SPEEDS, THE TRANSMISSION ERRONEOUSLY SWITCHED INTO NEUTRAL AND THE VEHICLE DECELERATED. DURING THE FAILURE, THE SERVICE ENGINE INDICATOR ILLUMINATED AND THE DISPLAY INDICATED THAT THE TRANSMISSION WAS STILL IN THE DRIVE POSITION. AFTER SHIFTING INTO NEUTRAL AND BACK INTO DRIVE, THE VEHICLE OPERATED NORMALLY. THE VEHICLE WAS TAKEN TO SPITZER DODGE (30101 S. DIXIE HWY, HOMESTEAD, FL) TO BE DIAGNOSED, BUT THE FAILURE COULD NOT BE DUPLICATED. THE VEHICLE WAS NOT REPAIRED AND THE FAILURE CONTINUED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURES. THE FAILURE MILEAGE WAS 20,000. ..*BF DETERMINED IT WAS A RELAY AND SPITZER FIXED IT UNDER WARRANTY. NO ISSUES SINCE JANUARY 2019.*JB
- NHTSA ID
- 11170717
- Incident
- Nov 1, 2018
- Mileage
- 20,000 mi
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
SERVICE BRAKES
Trac-Rite Operation Diagnosis, Chatter, Shudder, Moving From A Stop And Turning
ENGINE
BEARING - CRANKSHAFT THRUST and KIT
ENGINE
BEARING - CRANKSHAFT THRUST and KIT
ELECTRICAL SYSTEM; STRUCTURE:BODY
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
STRUCTURE:BODY
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
ELECTRICAL SYSTEM; STRUCTURE:BODY
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.