CONSUMER STATES OF HAVING PROBLEMS WITH THE HEATHER ON THE VEHICLE. PLEASE ADD MORE INFORMATION. TS
- NHTSA ID
- 8021331
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 3 NHTSA owner-reported complaints for the 1999 Chevrolet G20, most frequently naming the brakes, driver assistance and visibility categories. 9 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 3 months of data.
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
No recalls in our database for this model year
That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.
Reports submitted to NHTSA, shown in the owner's own words
CONSUMER STATES OF HAVING PROBLEMS WITH THE HEATHER ON THE VEHICLE. PLEASE ADD MORE INFORMATION. TS
AFTER THE BRAKES WERE REPLACED, THE AUTO STARTED PULLING TO THE LEFT WHILE BRAKING. *AK
WHILE APPLYING THE BRAKES VEHICLE WOULD ACCELERATE WITHOUT ANY INDICATION. PLEASE PRIVIDE FURTHER INFORMATION. *AK
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS.
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Vehicle Recalls
EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
| Year | Complaints | Recalls | Investigations | Issue Index |
|---|---|---|---|---|
| 1999Viewing | 3 | 0 | 0 | — |
| 1998 | 2 | 1 | 0 | — |
| 1997 | 5 | 1 | 0 | — |
| 1996 | 7 | 7 | 0 | — |
| 1995 | 82 | 6 | 0 | 55.9 |
| 1994 | 42 | 7 | 0 | 56.9 |
| 1993 | 59 | 6 | 0 | 59.9 |
| 1992 | 19 | 4 | 0 | 45.4 |
| 1991 | 5 | 4 | 0 | — |
| 1990 | 17 | 3 | 0 | 50.5 |
| 1989 | 7 | 3 | 0 | — |
| 1988 | 11 | 2 | 1 | 63.0 |
| 1987 | 10 | 3 | 2 | 60.6 |
| 1986 | 4 | 1 | 2 | — |
| 1985 | 6 | 1 | 2 | — |
| 1984 | 2 | 3 | 0 | — |
| 1983 | 1 | 3 | 0 | — |
| 1982 | 1 | 3 | 0 | — |
| 1981 | 0 | 2 | 0 | — |
| 1980 | 0 | 2 | 0 | — |
| 1979 | 1 | 3 | 0 | — |
| 1978 | 1 | 3 | 0 | — |
| 1977 | 0 | 2 | 0 | — |
| 1976 | 0 | 1 | 0 | — |
| 1975 | 0 | 1 | 0 | — |
| 1974 | 0 | 2 | 0 | — |
| 1973 | 0 | 1 | 0 | — |
| 1971 | 1 | 0 | 0 | — |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.